All Products

SKU: DF-SEN0570 | Brand: DFRobot

Fermion: MEMS Smoke Gas Detection Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal heat...

SKU: DF-SEN0567 | Brand: DFRobot

Fermion: MEMS Ammonia NH3 Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minim...

SKU: PL-4733 | Brand: Pololu

The MP6550 from Monolithic Power Systems (MPS) is an H-bridge motor driver IC that can be used for bidirectional control of one brushed DC motor at 1.8 V to 22 V. It can supply up to about 1.7 A continuously and featu...

SKU: SF-SEN-19096 | Brand: SparkFun

The SparkFun BME688 Environmental Sensor is a breakout that combines a gas scanning sensor with temperature, humidity, and barometric pressure sensing for a complete environmental sensor in a single package. The ga...

SKU: DF-SEN0501 | Brand: DFRobot

This multifunctional environmental sensor comprises SHTC3 temperature & humidity sensor, BMP280 barometric pressure sensor, VEML7700 ambient light sensor, and ML8511 UV sensor into one and offers 5 kinds of environmen...

SKU: DF-TEL0140 | Brand: DFRobot

A simple 433 MHz RF wireless switch set that transmits digital signals between a transmitter and receiver module. Based on Gravity interface connectors, it works with any microcontroller that can read and write digita...

SKU: DF-SEN0487 | Brand: DFRobot

This tiny MEMS microphone has an amplifier gain of 66. When there is no sound detected, it outputs voltage around 0.66*VCC. When speaking, you can easily get the acoustic waveform by ADC sampling. The module can be us...

SKU: AF-4481 | Brand: Adafruit

The Adafruit ItsyBitsy nRF52840 Express brings Bluetooth Low Energy connectivity to the tiny ItsyBitsy form factor. Powered by the Nordic nRF52840 Cortex M4 at 64 MHz with 1 MB Flash, 256 KB RAM, and 2 MB QSPI Flash, ...

SKU: SF-PRT-18582 | Brand: SparkFun

This IR proximity contactless button makes for a good replacement for typical push buttons in situations where touching the button isn't required or desirable (especially in this day and age). This button includes a b...

SKU: DF-SEN0403 | Brand: DFRobot

DFRobot TCS3430 XYZ Tristimulus Color Sensor employs the new generation of TCS3430 spectral sensor IC launched by the well-known AMS company. It features advanced digital ambient light sensing(ALS) and CIE 1931 tristi...

SKU: EC-CRF16500R | Brand: Elecrow

This product has been used in building intercom and access control products for many years, it has high stability and strongest anti-interference ability. The ATMEGA8 of this module is a high- performance AVR MCU of A...

SKU: AF-4829 | Brand: Adafruit

The Adafruit SGP40 is a next-generation MOX (metal-oxide) gas sensor from Sensirion for indoor air quality monitoring. Unlike its predecessor the SGP30, the SGP40 outputs a raw signal that is processed through Sensiri...

SKU: SF-DEV-17047 | Brand: SparkFun

The SparkFun Qwiic GPIO adds eight additional digital I/O pins to your project via I2C, based on the TCA9534 I/O Expander from Texas Instruments. Read and write pins just like standard Arduino digital pins using the i...

SKU: EC-WWI8266ESP | Brand: Elecrow

This serial WiFi transceiver module is based on ESP8266 SoC.. ESP8266 is a highly integrated chip that has Integrated TCP/IP protocol stack. It offers a complete and self-contained Wi-Fi networking solution, allowing ...

SKU: SF-SEN-16295 | Brand: SparkFun

The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junc...

SKU: LB-24-THERMISTOR | Brand: Little Bird

A thermistor changes its resistance with temperature. Find our tutorial here A thermistor is a type of variable resistor whose resistance changes with temperature. Let's take a closer look at the thermistor module....

SKU: DF-DFR0588 | Brand: DFRobot

Gravity: Analog SHT30 Temperature & Humidity Sensor adopts the new generation SHT30 temperature and humidity sensor from Sensirion. Thanks to Sensirion's CMOSens® technology, highly integrated capacitive humidity sens...

SKU: SF-SEN-15569 | Brand: SparkFun

This is the HC-SR04 ultrasonic distance sensor. This economical sensor provides 2cm to 400cm of non-contact measurement functionality with a ranging accuracy that can reach up to 3mm. Each HC-SR04 module includes an u...

SKU: AF-4258 | Brand: Adafruit

The Adafruit LPS35HW is a water-resistant barometric pressure and temperature sensor from ST. The sensing element is housed in a ceramic package with waterproof gel protection, making it safe to use in damp and humid ...

SKU: AF-979 | Brand: Adafruit

The LV-EZ0 from MaxBotix is a compact ultrasonic rangefinder providing short to long-range detection. It can detect objects from 0 to 254 inches (6.45 m) and provides calibrated range information from 6 inches out to ...