All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
3-AA Battery Holder, Enclosed with Switch
SKU: PL-1152 | Brand: Pololu
An enclosed battery holder for three AA cells with a built-in on/off switch. The snap-on lid slides over the batteries to fully enclose them, keeping the cells secure during use. Provides approximately 4.5 V with thr...
Delivered by Mon 5 Oct
Battery Holder 2xAA with Cover and Switch
SKU: SF-PRT-09547 | Brand: SparkFun
A 2×AA battery holder with a sliding cover secured by a Phillips head screw and a built-in ON/OFF switch for convenient power control. The 150mm tinned leads make it easy to solder into your projects. Key Features ...
Delivered by Mon 5 Oct
4xAA battery holder (square with cover)
SKU: DF-FIT0080 | Brand: DFRobot
A 4-cell AA battery holder in a square (2×2) configuration with a sliding removable cover and a built-in ON/OFF switch. Features 5-inch tinned leads for easy soldering. The cover keeps batteries secure, and the switch...
Delivered by Mon 5 Oct
2AA Battery Holder with Cover and Switch and Large size Alligator
SKU: LB-LS5508 | Brand: Little Bird
A 2×AA battery holder with a protective cover, built-in on/off switch, and large alligator clip leads. The alligator clips make it easy to connect to circuits, components, and conductive materials without soldering — ...
Delivered by Mon 5 Oct
6xAA battery holder
SKU: DF-FIT0266 | Brand: DFRobot
A 6×AA battery holder with bare wire leads for creating 7.2V rechargeable battery packs (NiMH/NiCd) or 9V packs from alkaline cells. The holder features side-by-side cell placement and comes with 150mm red and black w...
Delivered by Mon 5 Oct
4 x AA Battery Holder with On/Off Switch
SKU: AF-830 | Brand: Adafruit
A 4×AA battery holder with a snap-on cover and built-in on/off switch. Holds four AA batteries in series, outputting a nominal 6V (alkaline) or 4.8V (NiMH), making it a convenient portable power source for 5V microcon...
Delivered by Mon 5 Oct
Micro:bit AA battery holder with Switch
SKU: LB-BATTERYAA | Brand: Little Bird
A 2× AA battery holder with on/off switch, designed for powering the BBC micro:bit on the go. The JST connector plugs directly into the micro:bit's battery port, and the ~14 cm cable provides enough length for flexibl...
Delivered by Mon 5 Oct
8 x AA battery holder
SKU: AF-449 | Brand: Adafruit
This 8×AA battery holder provides a portable 12V power source by connecting 8 AA batteries end-to-end in series. It delivers approximately 12VDC with alkaline cells (9.6V with NiMH rechargeables) and supports up to 2A...
Delivered by Mon 5 Oct
2xAA Battery Holder With ON/OFF Switch and Cover for Micro:bit Board
SKU: EF-EF10095 | Brand: ElecFreaks
A 2×AA battery holder designed specifically for the BBC micro:bit. The built-in JST PH connector plugs directly into the micro:bit's battery socket, and the integrated on/off switch with a secure cover provides safe, ...
Delivered by Mon 5 Oct
Battery Holder 4xAA with Cover and Switch
SKU: SF-PRT-12083 | Brand: SparkFun
This 4xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF swi...
Delivered by Mon 5 Oct
3xAA Battery Holder
SKU: DF-FIT0610 | Brand: DFRobot
This enclosed battery holder takes 3× AA batteries in series, providing approximately 4.5V from alkaline cells or 3.6V from NiMH/NiCd rechargeables. It features a built-in on/off switch and a sliding, removable cover ...
Delivered by Mon 5 Oct
4xAA Battery Holder with DC connector
SKU: LB-LR0309-16 | Brand: Little Bird
A flat 4×AA battery holder with a 2.1mm DC barrel jack connector, providing an easy way to power Arduino boards and other projects that accept a DC barrel plug. With four alkaline AA batteries installed, it delivers a...
Delivered by Mon 5 Oct
6xAA Battery Holder with DC connector
SKU: LB-LR0294 | Brand: Little Bird
A simple 6-cell AA battery holder with a 125mm (5") cable terminated with a standard 5.5×2.1mm centre-positive barrel jack connector. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alk...
Delivered by Mon 5 Oct
4xAA battery holder (square)
SKU: DF-FIT0079 | Brand: DFRobot
A simple 4-cell AA battery holder in a square (2×2) configuration. Features 5-inch tinned leads for easy soldering into your project. Provides 6V nominal output with four AA alkaline batteries, or 4.8V with rechargeab...
Delivered by Mon 5 Oct
Battery Holder 3xAA with Cover and Switch
SKU: SF-PRT-10891 | Brand: SparkFun
This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF swi...
Delivered by Mon 5 Oct
8 x AA battery holder with 5.5mm/2.1mm Plug and On/Off Switch
SKU: AF-875 | Brand: Adafruit
This 8×AA battery holder provides a portable power source with a built-in on/off switch and a standard 5.5 mm / 2.1 mm DC barrel plug for easy connection to Arduino boards, LED strips, motors, and other 12V devices. U...
Delivered by Mon 5 Oct
MicroUSB Battery Holder (3xAA)
SKU: DF-FIT0362 | Brand: DFRobot
This battery holder takes three AA cells and provides a simple way to power compatible Arduino-style boards via a Micro USB connection.Use it with NiMH or NiCd rechargeable cells for a 3.6V battery pack, or with alkal...
Delivered by Mon 5 Oct
4x AA Battery Holder (with Power Switch, DC2.1 Jack, and Cover)
SKU: DF-FIT0918 | Brand: DFRobot
A compact 4×AA battery holder with a built-in on/off power switch, DC2.1 barrel jack output, and a protective cover. Ideal for powering Arduino, Raspberry Pi, and other microcontroller projects with a portable 6V supp...
Delivered by Mon 5 Oct
5 x AA Battery Holder with 2.1mm DC Jack
SKU: AF-3456 | Brand: Adafruit
This 5×AA battery holder delivers approximately 7.5V from five AA batteries, terminated with a 2.1mm DC barrel plug (centre positive). It provides the ideal voltage for Arduino boards and other development boards with...
Delivered by Mon 5 Oct
Eclipse AA Alkaline Batteries Bulk Pack of 40
SKU: TB-SB2332 | Brand: Little Bird
Stock up and save with this bulk pack of 40 AA alkaline batteries. Ideal for keeping your workshop, classroom, or household powered without running out at critical moments. These reliable 1.5V batteries are mercury a...
Delivered by Mon 5 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
