Addressable LEDs

SKU: AF-3634 | Brand: Adafruit

A high-density side-emitting NeoPixel strip with 120 individually addressable RGB LEDs per metre on a flexible black PCB. Unlike standard NeoPixel strips that emit light upward, these side-light LEDs emit at 90 degree...

SKU: AF-1430 | Brand: Adafruit

Put on your sunglasses before plugging in this shield — 40 eye-blistering RGB LEDs adorn the NeoPixel Shield for a blast of configurable colour. Arranged in a 5×8 matrix, each pixel is individually addressable using j...

SKU: DF-FIT0352 | Brand: DFRobot

LED Strips always glow nicely in the dark and are super fun to play with. They can be used in home decorations, festives and interactive art installations. For example this Christmas someone put a phone-controlled ...

SKU: SF-BOB-13282 | Brand: SparkFun

This is a breakout board for the WS2812B RGB LED. The WS2812B is actually an RGB LED with a WS2811 built right into the LED! All the necessary pins are broken out to 0.1" spaced headers for easy bread-boarding. Severa...

SKU: DF-DFR0462 | Brand: DFRobot

Good news! There is a new member in to the Gravity family - The Flexible 8x32 RGB LED Matrix! This module is a square panel with a soldered XH2.54 3-pin interface with pin mappings that perfectly match the Ardui...

SKU: SF-BOB-29762 | Brand: SparkFun

  The WS2812 (often referred to as a "NeoPixel") has become the standard for addressable LED projects. This RGB LED Breakout board, now with pre-soldered right-angle headers, is the absolute easiest way to st...

SKU: AF-6165 | Brand: Adafruit

Create large-scale LED displays without piecing together individual strips. This ready-to-use NeoPixel outdoor netting arranges 1,600 RGB LEDs in a 20 × 80 grid across a 1 × 4 metre flexible net — all driven from a si...

SKU: AF-6159 | Brand: Adafruit

NeoPixel LED Outdoor Netting – 20x20 Grid for Vibrant DisplaysThis pre-assembled NeoPixel LED Outdoor Netting makes it effortless to create large LED grids without the hassle of piecing together multiple strips. With ...

SKU: AF-5722 | Brand: Adafruit

The Adafruit High Density NeoPixel UV LED Strip packs 60 ultraviolet 5050-sized LEDs per metre onto a flexible PCB with weatherproof sheathing. Each LED contains three individual UV diodes controlled as a single NeoPi...

SKU: AF-4917 | Brand: Adafruit

These fairy lights use NeoPixel-compatible protocol and work with any NeoPixel library — but they behave differently from standard NeoPixels. Instead of acting as a daisy-chained shift register, each LED in this stran...

SKU: AF-4911 | Brand: Adafruit

This dual-edge side-light NeoPixel strip features LEDs on both the top and bottom of the flexible PCB, producing an even glow from both sides. With 60 LED pairs per metre (120 LEDs total), both LEDs in each segment di...

SKU: AF-5295 | Brand: Adafruit

Add a smooth slide control to any I2C project with the Adafruit NeoSlider — a 75 mm linear slide potentiometer with four RGB NeoPixel underlights, all communicating over I2C via the onboard seesaw microcontroller. No ...

SKU: AF-5225 | Brand: Adafruit

Need to add little dots of colour to a costume, wearable, or structure? The Adafruit NeoPixel Slim LED Dot Strand uses soft plastic cords of plated wire instead of a rigid PCB, making it easy to embed, sew over, or ca...

SKU: DF-FIT0750 | Brand: DFRobot

This 50cm programmable RGB LED strip uses SK6812 (5050) COB LEDs to produce bright, uniform, full-colour light with no visible hotspots. With 166 individually addressable LEDs packed into just half a metre, it deliver...

SKU: EC-AS402812NP | Brand: Elecrow

This is the NeoPixel Shield from Duinofun. This Arduino shield is equipped with 40 WS2812 RGB LEDs arranged in an 5x8 matrix with on one pin (Digital #6) needed to control them all.Each shield is powered by the 5V onb...

SKU: AF-4560 | Brand: Adafruit

The Adafruit Soft Flexible Wire NeoPixel Strand features 50 individually addressable RGB LEDs spaced approximately 100 mm (~4") apart on soft, plated wire. Unlike traditional flexible PCB strips that can crack when be...

SKU: SF-COM-16346 | Brand: SparkFun

The WS2812B (or "NeoPixel") may look like a common 5050-sized (5x5mm) SMD LED, but there’s actually an integrated control circuit embedded inside there too. Sometimes you don't need 10, maybe you need 50! If you are t...

SKU: SF-COM-16347 | Brand: SparkFun

The WS2812B (or "NeoPixel") may look like a common 5050-sized (5x5mm) SMD LED, but there’s actually an integrated control circuit embedded inside there too. Sometimes you don't need 10 or even 50, maybe you need a who...

SKU: M5-A042 | Brand: Little Bird

Description NEOFLASH is a RGB LED panel with 192 RGB LED(24x8). When you program this Unit, please pay attention to the sequence of the Neopixels. From top left (Where PIR placed) to right, and top to bottom. Co...

SKU: AF-4352 | Brand: Adafruit

Build a handheld light-up button controller with this complete kit that pairs the Adafruit 4×4 NeoTrellis RGB Driver with a Feather M4 Express inside an elegant laser-cut acrylic enclosure. The 16 silicone buttons eac...