Adafruit
NeoPixel LED Outdoor Netting - 20 x 20 LEDs - 1x1 Meter Sizing
· MPN: ADA6159
Addressable LEDs
All Products
LED Matrices & Displays
New Arrivals
Adafruit
Brands and Manufacturers
LEDs
LEDs & NeoPixels
NeoPixels
Components
$186.45
|
In stock at supplier
NeoPixel LED Outdoor Netting – 20x20 Grid for Vibrant DisplaysThis pre-assembled NeoPixel LED Outdoor Netting makes it effortless to create large LED grids w...
Estimated Delivery
Arrives
Disclaimer
Secure checkout
NeoPixel LED Outdoor Netting – 20x20 Grid for Vibrant Displays
This pre-assembled NeoPixel LED Outdoor Netting makes it effortless to create large LED grids without the hassle of piecing together multiple strips. With a 20x20 RGB LED layout, you get 400 addressable pixels, all controlled with just a single data pin.
Key Features:
- 20 x 20 NeoPixel LEDs – 50mm (2") spacing in a zig-zag wiring pattern.
- Simple control – Compatible with SK6812/WS2812/NeoPixel signal at 5V logic.
- 12V power input – Ensures consistent brightness across the grid (lower voltages may cause dimming).
- Power draw: 30mA per LED (up to 12A at full brightness; 12V 5A is sufficient for most displays).
- Works with ESP32 & WLED – Recommended for Sparkle Motion board or any controller capable of driving 400 LEDs.
- Outdoor-friendly – Designed for outdoor use but not waterproof (avoid submersion and prolonged direct sunlight).
- Easy mounting – Plastic rings on the top/bottom and coated wire loops on the sides for secure installation.
Perfect for holiday displays, event decorations, or interactive installations, this LED netting makes expanding to larger grids simple and hassle-free.
Don't forget to read our NeoPixel Uber guide for more information on how to care and feed your NeoPixels!
Don't forget to read our NeoPixel Uber guide for more information on how to care and feed your NeoPixels!
Jargon buster
Plain-language definitions for the technical terms used above.
- ESP32
- ESP32 is a family of microcontroller modules with built-in wireless features such as Bluetooth and WiFi. Knowing this product uses an ESP32-based module helps explain how it provides wireless serial communication and firmware update features.
- LED
- A light-emitting diode is a small electronic component that lights up when current flows through it in the correct direction. In this kit, LEDs create the flashing effect, so polarity and correct soldering matter for the project to work.
- NeoPixel
- A type of addressable LED system where colour data is sent along a single digital data line from one LED or controller to the next. Compatibility matters because the timing and signal format must match for the lights or driver board to respond correctly.
- RGB
- Short for red, green and blue, usually referring to an LED that can mix those three colours. It matters because controlling an RGB LED teaches how separate outputs combine to create different colours.
Find this product in
Brands
Components
Related Tutorials
Free guides on learn.littlebird.com.au
