Addressable LEDs

SKU: DF-FIT0676 | Brand: DFRobot

A WS2812B addressable RGB LED ring lamp composed of 93 LEDs arranged in 6 concentric rings. Each ring can be controlled independently or cascaded together, and individual rings can be cut apart and recombined into cus...

SKU: AF-4368 | Brand: Adafruit

We have all sorts of LED strips for a wide range of needs. Chonky strips? We got those! Strips with alligator clips that are easy-peasy to MakeCode? Oh definitely. Weatherproof? We have a gamut of options.Now we have ...

SKU: DF-DFR0596 | Brand: DFRobot

The 64×32 Flexible RGB LED Matrix with 5mm pitch from DFRobot offers a lightweight, bendable display with 2048 individually addressable RGB LEDs. Its flexible PCB allows it to conform to curved surfaces, making it ide...

SKU: AF-4310 | Brand: Adafruit

A 1-metre flexible LED strip encased in translucent silicone rubber that produces a smooth, neon-like glow. The strip uses 96 individually addressable WS281x (NeoPixel) LEDs per metre, driven by standard NeoPixel data...

SKU: AF-3729 | Brand: Adafruit

Blinded by the light? Tell "The Boss" not to worry, especially with this ultra thin Side Light NeoPixel LED PCB Bar! Fancy side light LED strips are a great alternative for folks who have loved ...

SKU: AF-1312 | Brand: Adafruit

This is the easiest way possible to add small, bright RGB pixels to your project. We took the same technology from our Flora NeoPixels and made them breadboard friendly, with two rows of 3 x 0.1" spaced header on e...

SKU: AF-3634 | Brand: Adafruit

A high-density side-emitting NeoPixel strip with 120 individually addressable RGB LEDs per metre on a flexible black PCB. Unlike standard NeoPixel strips that emit light upward, these side-light LEDs emit at 90 degree...

SKU: AF-1430 | Brand: Adafruit

Put on your sunglasses before plugging in this shield — 40 eye-blistering RGB LEDs adorn the NeoPixel Shield for a blast of configurable colour. Arranged in a 5×8 matrix, each pixel is individually addressable using j...

SKU: AF-2237 | Brand: Adafruit

The Adafruit DotStar Digital LED Strip (30 LED/m, black flex PCB) delivers superior performance over traditional NeoPixels with its 2-wire SPI interface. Push data at up to 32 MHz clock speed with no critical timing r...

SKU: SF-COM-14016 | Brand: SparkFun

These are addressable 5-meter-long 5V RGB LED strips that come packed with 300 APA102Cs. APA102 LEDs are very similar to WS2812s with a few caveats: APA102s can be controlled with a standard SPI interface, and they ha...

SKU: DF-FIT0352 | Brand: DFRobot

LED Strips always glow nicely in the dark and are super fun to play with. They can be used in home decorations, festives and interactive art installations. For example this Christmas someone put a phone-controlled ...

SKU: SF-BOB-13282 | Brand: SparkFun

This is a breakout board for the WS2812B RGB LED. The WS2812B is actually an RGB LED with a WS2811 built right into the LED! All the necessary pins are broken out to 0.1" spaced headers for easy bread-boarding. Severa...

SKU: AF-3195 | Brand: Adafruit

Snap the Pimironi Blinkt! on top of a Raspberry Pi Zero, or any Raspberry Pi with a 2x20 connector, for a fun 1x8 RGB LED matrix powered directly from the Pi.  The Blinkt! provides a wash or controllable ...

SKU: DF-DFR0462 | Brand: DFRobot

Good news! There is a new member in to the Gravity family - The Flexible 8x32 RGB LED Matrix! This module is a square panel with a soldered XH2.54 3-pin interface with pin mappings that perfectly match the Ardui...

SKU: AF-6165 | Brand: Adafruit

Create large-scale LED displays without piecing together individual strips. This ready-to-use NeoPixel outdoor netting arranges 1,600 RGB LEDs in a 20 × 80 grid across a 1 × 4 metre flexible net — all driven from a si...

SKU: AF-6159 | Brand: Adafruit

NeoPixel LED Outdoor Netting – 20x20 Grid for Vibrant DisplaysThis pre-assembled NeoPixel LED Outdoor Netting makes it effortless to create large LED grids without the hassle of piecing together multiple strips. With ...

SKU: AF-4917 | Brand: Adafruit

These fairy lights use NeoPixel-compatible protocol and work with any NeoPixel library — but they behave differently from standard NeoPixels. Instead of acting as a daisy-chained shift register, each LED in this stran...

SKU: AF-4911 | Brand: Adafruit

This dual-edge side-light NeoPixel strip features LEDs on both the top and bottom of the flexible PCB, producing an even glow from both sides. With 60 LED pairs per metre (120 LEDs total), both LEDs in each segment di...

SKU: AF-5295 | Brand: Adafruit

Add a smooth slide control to any I2C project with the Adafruit NeoSlider — a 75 mm linear slide potentiometer with four RGB NeoPixel underlights, all communicating over I2C via the onboard seesaw microcontroller. No ...

SKU: AF-5225 | Brand: Adafruit

Need to add little dots of colour to a costume, wearable, or structure? The Adafruit NeoPixel Slim LED Dot Strand uses soft plastic cords of plated wire instead of a rigid PCB, making it easy to embed, sew over, or ca...