Adafruit

SKU: AF-2058 | Brand: Adafruit

This slim and modern potentiometer is small and compact, yet looks good and has a nice feel. We hand selected the best knobs for your project in different sizes and varieties.  This one is the Slim Metal Knob ...

SKU: AF-2174 | Brand: Adafruit

Keep your 5 mm LEDs securely mounted with these lightweight plastic LED holders featuring a bevelled finish. Simply slot the LED through the opening and it snaps into place — no tools or hardware needed. The bevelled ...

SKU: AF-2165 | Brand: Adafruit

A popular low-dropout (LDO) 3.3 V linear voltage regulator based on the LD1117 in a TO-220 package. With approximately 1 V dropout and up to 800 mA output current, it cleanly steps down 5–15 V supplies to a regulated ...

SKU: AF-1993 | Brand: Adafruit

This 2×20 (40-pin) IDC box header is the matching connector for 40-pin GPIO ribbon cables used with Raspberry Pi models that have a 40-pin GPIO header. Solder it onto perfboard to create a breakout point for your Pi's...

SKU: AF-2429 | Brand: Adafruit

Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also i...

SKU: AF-2504 | Brand: Adafruit

Low-temperature thermoplastic beads (also known as Polymorph, Instamorph, or Friendly Plastic) that become moldable when heated to approximately 60 °C (140 °F). Simply heat in hot water until the beads turn clear and ...

SKU: AF-2667 | Brand: Adafruit

Chip Quik SMD291 tack flux in a convenient 10 cc syringe with plunger and dispensing tip. This synthetic no-clean flux is ideal for all rework, soldering, desoldering, and reflow applications — it stays where you appl...

SKU: AF-2671 | Brand: Adafruit

These 2 mm pitch 40-pin break-apart male headers are designed for modules and boards that use 2 mm pin spacing instead of the standard 2.54 mm (0.1″) pitch. Each pack includes five 40-pin strips that can be easily sna...

SKU: AF-3009 | Brand: Adafruit

Short break-away male headers in a convenient pack of ten — ideal for low-profile connections where standard-height male headers would be too tall. These headers are designed to pair with short female headers for a sl...

SKU: AF-3105 | Brand: Adafruit

A compact, breadboard-friendly illuminated tactile switch featuring a blue LED that shines through a universal power symbol on top. Adds both a momentary pushbutton and a colourful indicator to your project in a singl...

SKU: AF-3141 | Brand: Adafruit

Our Raw F/F Jumper Wires are perfect for making custom jumper wire sets for wire harnesses or jumpering between headers on PCB's. These premium jumpers are a little over 6" (150mm) long and come in a 'strip' of 40 ...

SKU: AF-3144 | Brand: Adafruit

Are you frustrated by the lack of customization options for your jumper wires? Look no further! Compatible with both male and female wires, these fully customizable wire housings bring DIY to a new level, giving yo...

SKU: AF-259 | Brand: Adafruit

This is a Lithium Ion and Lithium Polymer battery charger based on the MCP73833. It uses a USB mini-B for connection to any computer or 'USB wall adapter'. Charging is performed in three stages: first a precondi...

SKU: AF-434 | Brand: Adafruit

For storing small parts (especially SMT/SMD components), these little modular boxes are ideal. They have individual clear pop-open covers so you can keep only the ones you want open - less risk of mixing up parts or h...

SKU: AF-476 | Brand: Adafruit

This 30mm translucent blue arcade button features a crystal-clear glossy finish and smooth button action. A pre-installed micro-switch with gold-plated contacts provides a satisfying press with tactile feedback — no s...

SKU: AF-607 | Brand: Adafruit

A 32×32 full-colour RGB LED matrix panel with 1024 LEDs at 4mm pitch, measuring approximately 5 inches (128mm) square. These panels are commonly used in video walls and signage, delivering bright, vivid colours with g...

SKU: AF-724 | Brand: Adafruit

Screw terminal blocks are the clean, maintainable solution for PCB-to-wire connections — no solder, no loose ends, easy to swap out later. These 3.5mm pitch 2-pin blocks are a practical size: wide enough for a range o...

SKU: AF-163 | Brand: Adafruit

A precision triple-axis accelerometer breakout featuring the Analog Devices ADXL335. With a ±3 g measurement range and analog outputs for X, Y, and Z axes, this sensor is ideal for tilt sensing, motion detection, and ...

SKU: AF-736 | Brand: Adafruit

With a slip ring assembly, your electronics can now twist and turn safely. Add wheel encoders, 360 degree sensors, rotating LEDs, rotors and more! We've seen a lot of people DIY slip ring's out of desperation but no l...

SKU: AF-816 | Brand: Adafruit

These right-angle male headers feature a 3-row configuration at standard 0.1" (2.54mm) pitch, making them ideal for connecting three-wire cables such as sensor and servo leads. Each piece is a 3×4 block, and four piec...