Adafruit

SKU: AF-4100 | Brand: Adafruit

Connect this to that without soldering using these small alligator clip test leads. 18" long cables with color-coded alligator clips on both ends. You get 6 pieces in 6 unique colors. Strong and grippy, these al...

SKU: AF-3643 | Brand: Adafruit

A 2.1 mm DC barrel jack with a built-in rocker switch, giving you a simple on/off control for devices that lack a dedicated power switch. It shares the same PCB footprint as a standard non-switched barrel jack, so it ...

SKU: AF-3688 | Brand: Adafruit

Stop fiddling with SD card sockets in the back of your latest gadget, and streeeeeeeeeetch out with a Micro SD Card Extender . This simple, but effective device gives you a long flexible cable, a psuedo Micro SD ...

SKU: AF-2138 | Brand: Adafruit

A compact 2-pin screw terminal block with 2.54mm (0.1") pitch, designed to fit directly into perfboard and protoboards. Terminal blocks provide reliable, tool-adjustable PCB-to-wire connections that are easy to mainta...

SKU: AF-2006 | Brand: Adafruit

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible...

SKU: AF-1881 | Brand: Adafruit

A 2-metre length of black 26AWG stranded-core wire with a flexible silicone sheath. Silicone-covered wire is significantly more supple and heat-resistant than standard PVC wire — rated to handle up to 200 °C and 600 V...

SKU: AF-1993 | Brand: Adafruit

This 2×20 (40-pin) IDC box header is the matching connector for 40-pin GPIO ribbon cables used with Raspberry Pi models that have a 40-pin GPIO header. Solder it onto perfboard to create a breakout point for your Pi's...

SKU: AF-2429 | Brand: Adafruit

Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also i...

SKU: AF-2671 | Brand: Adafruit

These 2 mm pitch 40-pin break-apart male headers are designed for modules and boards that use 2 mm pin spacing instead of the standard 2.54 mm (0.1″) pitch. Each pack includes five 40-pin strips that can be easily sna...

SKU: AF-3009 | Brand: Adafruit

Short break-away male headers in a convenient pack of ten — ideal for low-profile connections where standard-height male headers would be too tall. These headers are designed to pair with short female headers for a sl...

SKU: AF-3143 | Brand: Adafruit

A pack of small dual-row connector housings for building custom jumper cable harnesses. Compatible with standard 0.1" pitch raw jumper wire crimp pins — snap in your crimped wires and create exactly the connector conf...

SKU: AF-3175 | Brand: Adafruit

This is a box of ten 25ft spools of stranded-core wire. Stranded-core wire is best used for wiring jigs where there's bending or movement expected. It also works well with terminal blocks. It's&nb...

SKU: AF-736 | Brand: Adafruit

With a slip ring assembly, your electronics can now twist and turn safely. Add wheel encoders, 360 degree sensors, rotating LEDs, rotors and more! We've seen a lot of people DIY slip ring's out of desperation but no l...

SKU: AF-816 | Brand: Adafruit

These right-angle male headers feature a 3-row configuration at standard 0.1" (2.54mm) pitch, making them ideal for connecting three-wire cables such as sensor and servo leads. Each piece is a 3×4 block, and four piec...

SKU: AF-3552 | Brand: Adafruit

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI a...

SKU: AF-6323 | Brand: Adafruit

The Adafruit USB Type C CC Resistor Fixer solves a common problem: USB-C devices that won't power or communicate when plugged into another USB-C port. Many devices are missing the two 5.1K CC (Configuration Channel) r...

SKU: AF-5930 | Brand: Adafruit

A PCIe flex cable (PCIe Pipe) for connecting the Pimoroni NVMe Base to a Raspberry Pi 5. The cable features a keyed design with 16 pads at the Raspberry Pi 5 end and 18 pins at the NVMe Base end, preventing incorrect ...

SKU: AF-5523 | Brand: Adafruit

This is a magnetic USB micro b plug! They pair with the Black Woven USB A or Type-C to Type-C Cable with Magnetic Tip . Plug your microUSB power (or data!) cable into one end, then insert the little magnetic nub into ...

SKU: AF-5443 | Brand: Adafruit

When you want a super skinny Ethernet / CAT-6 cable, this noodle-y UTP jumper is only 3mm thick at the center so that it can flex around enclosures easily. This cable is 30cm long, about one imperial foot, c...

SKU: AF-5453 | Brand: Adafruit

Often used for floppy drives, 34 pin IDC cables have a 2x17 array of pins. This cable will let you connect one port to another with a festive rainbow design! Both ends have strain relief and keyed connectors. Perfect ...