Adafruit
Shop Adafruit products at Little Bird Electronics, your trusted Australian source for this iconic maker brand. From NeoPixel LEDs and Feather microcontrollers to Circuit Playground boards and TFT displays, we stock a wide range of Adafruit-designed hardware for every project.
Whether you're building interactive wearables, learning electronics in the classroom, or prototyping IoT devices, Adafruit's well-documented ecosystem makes it easy to get started. Available for delivery across Australia.
2.0mm Pitch 5-pin Cable Matching Pair - JST PH Compatible
SKU: AF-5089 | Brand: Adafruit
A matching pair of 5-pin JST PH compatible cables with inline plug and socket connectors. Each cable is 20 cm long with stranded 26 AWG wires, providing a reliable and compact connection that can carry a couple of amp...
Out of stock
RJ12 Jack Connectors - EV3/NXT LEGO Compatible - Pack of 10
SKU: AF-4434 | Brand: Adafruit
If you have any LEGO Mindstorm or EV3 sensors/motors/controllers you probably noticed the phone-cable-like connectors that are used to go from accessories to controller boards. However, you can't use every-day phone j...
Out of stock
3.5mm Mono Audio Jack to Alligator Clip Cable
SKU: AF-4182 | Brand: Adafruit
A 3.5 mm mono audio jack cable with alligator clips on the other end, making it easy to clip onto development boards like the BBC micro:bit or Adafruit Circuit Playground. Also compatible with AT (accessibility techno...
Out of stock
JST SH Compatible 1mm Pitch 3 Pin to Premium Male Headers Cable
SKU: AF-5755 | Brand: Adafruit
If you're fancying to connect to the debug port on a Pico WH, or the two ports on a Pico Debug Probe or anything else with a JST SH compatible 3-pin connector, this cable will do the trick. It has a 1mm pitch JST S...
Out of stock
30 Piece 5.5 / 2.1mm to DC Barrel Jack Adapter Kit
SKU: AF-5474 | Brand: Adafruit
A comprehensive set of 30 barrel jack plug adapters that convert a standard 5.5mm / 2.1mm DC jack to a wide variety of other tip sizes. Perfect for powering devices that use non-standard barrel connectors from your ex...
Out of stock
DIY Magnetic Connector - Right Angle Four Contact Pins
SKU: AF-5358 | Brand: Adafruit
If you love power adapters or toys & gadgets that have magnetic connections, you can now experiment with these futuristic connectors easily. It's sorta like a DIY "MagSafe-styled" connector, with four 0.1" spaced cont...
Out of stock
IC Socket - for 16-pin 0.3 Chips - Pack of 3
SKU: AF-2203 | Brand: Adafruit
An IC (Integrated Circuit) socket allows you to insert and remove chips easily from an assembled kit or project This item contains 3 of the 16 pin 0.3" wide version. Best used with chips that have 16 pins (2x8) an...
Out of stock
Arcade/Button Quick-Connect Wire Pair - Set of 10 pairs
SKU: AF-1152 | Brand: Adafruit
These quick-connect wire pairs make wiring arcade-style and metal buttons fast and simple. Each wire comes as a pair with two 0.11" quick-connect terminals pre-crimped onto 20cm long wires, terminated together in a JS...
Out of stock
Silicone Cover Stranded-Core Wire - 50ft 30AWG White
SKU: AF-3169 | Brand: Adafruit
Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible...
Out of stock
50-pin 0.5mm Pitch FPC Flex Cable - 250mm / 10 long
SKU: AF-1682 | Brand: Adafruit
This 50-pin FPC (Flexible Printed Circuit) cable is ultra-thin and flexible, ideal for tight spaces where a round cable would be too bulky. At 250mm (10″) long with 0.5mm pitch contacts, it's a common format used in d...
Out of stock
GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header
SKU: AF-2243 | Brand: Adafruit
A short-profile 2×20 female through-hole header for connecting Raspberry Pi HATs with minimal height above the board. This custom header provides a slimmer fit than standard-height GPIO headers, ideal for compact encl...
Out of stock
3.5 / 1.3mm or 3.8 / 1.1mm to 5.5 / 2.1mm DC Jack Adapter Cable
SKU: AF-2788 | Brand: Adafruit
A DC barrel jack adapter cable that converts a 3.5/1.3 mm or 3.8/1.1 mm DC plug to the standard 5.5/2.1 mm DC barrel jack format. Internal spring contacts accommodate outer diameters from 3.5 mm to 3.8 mm, making it v...
Out of stock
36-pin 0.1 Female header - pack of 5!
SKU: AF-598 | Brand: Adafruit
Female headers are one of the most versatile components in electronics — perfect for connecting things together, soldering to perfboards, creating sockets for wires, or pairing with break-away male header strips. This...
Out of stock
Adafruit USB Type C Plug Breakout
SKU: AF-5978 | Brand: Adafruit
The Adafruit USB Type C Plug Breakout gives you easy access to the pins on a USB-C plug connector, making it simple to add a USB-C connection to your projects. A 5.1K resistor on the CC1 pin signals the upstream host ...
Out of stock
Shrouded Servo to Alligator Clip Cable - 17cm long
SKU: AF-5514 | Brand: Adafruit
Stretch out your servo connections with this flexible servo to alligator clip cable. It has a 3-pin shrouded "male" connection to plug your servo into and then, 17cm later, three alligator clips - it even keeps the co...
Out of stock
Pink and Purple Woven USB A to USB C Cable - 1 meter long
SKU: AF-5153 | Brand: Adafruit
A 1-metre USB A to USB C cable with a woven pink and purple fabric cover. The braided outer sheath provides durability and a distinctive look, making it a great choice when cables are visible on a desk or workspace. ...
Out of stock
2.54mm 0.1" Pitch 12-pin Jumper Cable - 20cm long
SKU: AF-4942 | Brand: Adafruit
A 12-pin ribbon-style jumper cable with 2.54mm (0.1") pitch connectors on both ends. A neat, reliable way to connect standard 0.1" header devices — perfboard, breadboards, breakout boards, and more — without taping in...
Out of stock
40-pin FPC to Right Angle 2x20 IDC Female Socket Header
SKU: AF-4909 | Brand: Adafruit
A 40-pin FPC to right-angle 2×20 IDC female socket header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a Raspberry Pi-compatible GPIO socket, allowing you to extend or relocate y...
Out of stock
2.5mm Pitch 6-pin Cable Matching Pair - JST XH compatible
SKU: AF-4876 | Brand: Adafruit
A matching pair of 6-pin JST XH-compatible cables — one with an inline plug and one with an inline socket — for easy connect-and-disconnect wiring. The 2.5mm pitch connectors friction-lock together for a secure, relia...
Out of stock
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
