All Products

SKU: SF-ROB-09347

Here, for all your mechatronic needs, is a simple, high quality continuous continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min. A standard 3-pin power and control cable is attached and all hardware listed below is included...

SKU: DF-FIT0302

This motor has a long (0.365" or 9.27 mm), D-shaped metal output shaft that matches the Pololu wheel 42x19mm and 32x7mm. The brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35 mm thread pitch), or you can use the mounting bracket or extended mounting brac...

SKU: AF-807 · MPN: 807

Run four solenoids, two DC motors or one bi-polar or uni-polar stepper with up to 600mA per channel using the L293D. These are perhaps better known as "the drivers in our Adafruit Motorshield". If you accidentally damaged the drivers in a shield, you can use one of these puppies to replace it....

SKU: AF-3810 · MPN: 3810

But what do you do when you want to add LEGO-compatible bricks and parts to your robotics project? This is the axle you need! Just push the axle housing end onto the shaft of your DC Gearbox "TT" motor, and it's ready to adapt to the standard LEGO-compatible cross axle parts, including ge...

SKU: DF-FIT0577

This DC gearmotor are now in the status of Pre-order and will ship in the end of Jun. This DC gearmotor has an integrated M3*20mm threaded rod as its output shaft, turn it into a linear actuator. 6V rated voltage, the no-load speed could arrive 98RPM, equivalent to 1.1mm/s. The brass facepla...

SKU: AF-3815 · MPN: 3815

But what do you do when you want to add LEGO-compatible bricks and parts to your robotics project? This is the bracket you need! Just push onto the body of your DC Gearbox "TT" motor, secure with screws, and it's ready to adapt to the standard LEGO-compatible parts. So easy, we think this...

SKU: AF-3768 · MPN: 3768

You have a TT motor, but you need to attach it to your CNC project, eh? Not so easy if you don't have an L-Bracket DC Motor Mount just like this fine one here! Made of 2mm aluminum metal, it's got a solid construction and is easy to get going. There are 4 mounting screws so you kno...

SKU: SF-ROB-24052 · MPN: ROB-24052

Here is a simple, low-cost servo for all your mechatronic needs. This little guy is able to take in 6 volts and deliver 1.5kg/cm (at 6V). of maximum torque at 0.09 sec/60° (at 6V). This small servo comes with a standard 3 pin power and control cable, six arms and six screws. Note: This is the s...

SKU: AF-3789 · MPN: 3789

Mechanical transmission for the win, this simple plastic pulley can attach to your TT motor to transmit rotation from the motor axle to...somewhere else.This is a very useful part when you require more than wheels for your robotics project. A belt and pulley solution can be light-weight and ...

SKU: AF-2442 · MPN: 2442

Need to make a tiny robot? This little micro servo rotates 360 degrees fully forward or backwards, instead of moving to a single position. You can use any servo code, hardware or library to control these servos. Good for making simple moving robots. Comes with five horns and attachment screw...

SKU: AF-4678 · MPN: 4678

A 48mm diameter right-hand mecanum wheel with ball-bearing-supported rollers for omnidirectional robot movement. When used in a set of four (two left, two right), mecanum wheels allow a robot to move forwards, backwards, sideways, and diagonally without turning. Nine rubber beads around the perim...