All Products
Showing 4261-4280 of 8809 products · 2601 unavailable products hidden
Hummingbird 4-Wire Extension
·
A one-metre extension cable for Hummingbird tri-colour LEDs, which need four conductors rather than the usual two. Handy when the LED belongs at the far end of a large model. Compatible with the Hummingbird Bit and the Hummingbird Duo.
Hummingbird Battery Pack
·
A 4 x AA battery holder with an on-off switch, made to power the motor supply on a Hummingbird controller. Use it when a student build needs to drive around the room instead of staying tethered to a USB lead. Works with both the Hummingbird Bit and the Hummingbird Duo. Batteries are not included ...
Hummingbird Bit Controller
·
The controller board at the heart of the Hummingbird Bit system, sold on its own as a spare or as a way to add another build station to a class set. A BBC micro:bit is required and is not included — the micro:bit slots into the edge connector and acts as the brain, while the Hummingbird board sup...
Hummingbird Bit Premium Kit (micro:bit Not Included)
·
A BBC micro:bit is required and is not supplied with this kit. The Hummingbird Bit controller runs on a micro:bit, so add one to your order — we stock them separately. The Hummingbird Bit Premium Kit is a box of lights, sensors and motors that students bolt onto whatever they can find: cardboard,...
Hummingbird Dial Sensor
·
A rotary dial that reports its position as a value from 0 to 100. Students use it to set a speed, dim a light, pick a mode or steer a servo by hand — the simplest way to put a person in the loop of a Hummingbird program. Connects to a sensor port on the Hummingbird controller. Works with the Humm...
Hummingbird Distance Sensor
·
Measures how far away an object is, so a Hummingbird build can dodge obstacles, count people walking past or feel its way around a maze. Recommended for the Hummingbird Bit; it is not supported on the older Hummingbird Duo. Plugs into a sensor port on the Bit controller and reads out in code as a...
Hummingbird Duo micro:bit Adapter
·
This adapter allows your Hummingbird Duo to work with the micro:bit. Simply plug it into the back of the Hummingbird, write programs in the block-based MakeCode environment, and download them onto the micro:bit. Once the code is downloaded, unplug your Hummingbird robot from the computer and your...
Hummingbird FS90 Micro Servo
·
The little servo in the Hummingbird range. Lower torque and lower cost than the full-size units, and small enough to hide inside a cardboard puppet or a lightweight walking robot. Good for expressive faces, flapping wings, moving arms and any build where the mass of a standard servo would be a pr...
Hummingbird Joystick
·
A thumb joystick with an integrated push button, wired for the Hummingbird controller. Two axes plus a click is enough to drive a rover, aim a servo turret, or — paired with a dial sensor — build a custom controller for Scratch or MakeCode Arcade games. Compatible with the Hummingbird Bit and the...
Hummingbird Light Sensor
·
An analogue light sensor on a Hummingbird lead: the brighter the light falling on it, the higher the signal voltage your program reads. Useful for nightlights that switch themselves on, sun-tracking models and any project where the robot should notice a shadow. It screws into a sensor port on the...
Hummingbird Position Servo (FS5103B)
·
Tell this servo an angle between 0 and 180 degrees and it travels there and holds. That makes it the right pick for arms, levers, opening jaws, gauge needles and anything that has to sit still at a known position. Connects to a servo port on the Hummingbird controller and is driven by a single bl...
Hummingbird Rotation Servo (FS5103R)
·
Where a position servo goes to an angle, this one keeps spinning — your code sets speed and direction instead. Add a Hummingbird Servo Wheel to each of a pair and last lesson's cardboard build becomes a mobile robot. Recommended for the Hummingbird Bit. On the older Hummingbird Duo, a gear motor ...
Hummingbird Servo Extension Cable
·
A 50cm extension lead for Hummingbird servos, for when the moving part ends up further from the controller than the standard cable allows — the head of a puppet, the top of a tower, the far end of an arm. Fits servo models HS-311, FS5103B, FS5103R and FS90, on both the Hummingbird Bit and the Hum...
Hummingbird Servo Plastic Block Adapter (LEGO Compatible)
·
Bridges the gap between Hummingbird servos and plastic building blocks. Mount the adapter on a position or rotation servo and LEGO-compatible bricks, beams and axles clip straight on, so students can build the mechanism properly instead of reaching for the hot glue. Fits servos used with the Humm...
Hummingbird Servo Wheel
·
A wheel that bolts onto the horn of a Hummingbird servo. Fit two to a pair of rotation servos and a student-built chassis can drive itself around the room. Sold individually, so most rovers need two. Suits servos on both the Hummingbird Bit and the Hummingbird Duo.
Hummingbird Single Colour LED - Green
·
A spare green LED for the Hummingbird system. The 5mm LED is pre-wired to a 50cm braided cable that screws straight into a Hummingbird controller's LED terminals — there is no breadboard, no resistor and no soldering to sort out first. Forward voltage 1.6V to 2.0V, rated for 20mA. Suits both the ...
Hummingbird Single Colour LED - Orange
·
Orange 5mm LED on a 50cm braided lead, built as a plug-in part for the Hummingbird robotics system rather than as a bare component. The two wires clamp into the LED terminals on a Hummingbird controller and are ready to program. Runs at 1.6V to 2.0V forward voltage with a recommended 20mA current...
Hummingbird Single Colour LED - Red
·
Replacement red LED for Hummingbird kits. Super-bright 5mm LED, 50cm braided cable, tinned ends that screw into the controller's LED terminals. Class sets lose LEDs faster than anything else in the box, so this is the part worth keeping spares of. Forward voltage 1.6V to 2.0V at 20mA. Fits the Hu...
Hummingbird Single Colour LED - Yellow
·
Yellow 5mm LED with a 50cm braided cable, supplied as a Hummingbird accessory. Screw the leads into an LED terminal on the Hummingbird controller and it is ready to code — no resistor or breadboard needed. 1.6V to 2.0V forward voltage, 20mA recommended. Suits both the Hummingbird Bit and the Humm...
Hummingbird Sound Sensor
·
Reports how loud the room is as a number your code can act on. Clap, shout, sing or set a drum going and the robot answers back. A favourite for reaction games, classroom noise meters and puppets that appear to listen. It connects to a sensor port on the Hummingbird controller rather than directl...
