All Products
Showing 21-40 of 52 products · 8 unavailable products hidden
Gravity: Thin-film Pressure Sensor for Pressure Science Course
·
The Gravity: Thin-film Pressure Sensor measures pressure through the deformation of a flexible film material. As pressure increases, the film deforms, producing higher analog output values, while lighter pressure results in lower output. This sensor is an excellent educational tool for hands-on e...
ESP32-S3-DevKitC-1 Development Board
The ESP32-S3-DevKitC-1 is an entry-level development board built around the ESP32-S3-WROOM-1 module, featuring integrated Wi-Fi and Bluetooth LE connectivity. The Xtensa dual-core LX7 processor provides hardware acceleration for neural network computing and signal processing, making it well suite...
PH2.0 3-Pin Male-to-Male Cable 10cm - 10 Pack
·
This 3-pin PH2.0 male-to-male cable pack provides compact, tidy connections for modular electronics builds. It is designed for use with Boson modules and the UNIHIKER development board, helping you connect sensors, peripherals and expansion modules without soldering.Each cable has keyed PH2.0 3-p...
FireBeetle 2 ESP32-P4 IoT & HMI Development Board with MIPI-CSI/DSI
·
FireBeetle 2 ESP32-P4 High-Performance Edge AI Microcontroller The FireBeetle 2 ESP32-P4 is a next-generation, high-performance microcontroller development board built around the powerful ESP32-P4R32 chip. Designed for modern AIoT applications, it features dual-core 400 MHz RISC-V processing, adv...
Arduino Portenta C33 Development Board
·
##Introduction The Arduino Portenta C33 is a streamlined module that offers the high performance of the Arduino Portenta family at a lower price point, thanks to optimizations and streamlined features. Ideal to developing cost-effective, real-time applications, the Portenta C33 features the ARM® ...
UNIHIKER K10 Plastic Protector Case
·
This protective back cover is designed for the UNIHIKER K10, helping shield the exposed back-side components from accidental contact and unexpected short circuits during classroom, workshop and maker use.The case is made from high-toughness plastic, giving the board extra protection against scrat...
ZL9NSQ Wireless 3D Attitude Sensor Module for Posture Detection
·
The ZL9NSQ is a high-performance 3D attitude sensor module that integrates a three-axis accelerometer, a three-axis gyroscope, and a three-axis magnetometer. Featuring a 32-bit ARM Cortex-M4F microprocessor, it utilizes the IMU Motion Engine algorithm along with a 2.4G wireless transceiver and pa...
STEM kit for Arduino
The STEM Kit for Arduino is a beginner-friendly electronics kit that provides everything you need to get started with Arduino prototyping. With the included sensors, displays, and components, you can build a wide range of projects — from reading environmental data to controlling LEDs and motors. ...
PH2.0-4P Female-to-Female Jumper Cable 5cm - 10 Pack
·
This compact PH2.0-4P cable is a short female-to-female lead for linking modular electronics hardware without messy excess wiring. It is designed for tidy connections between sensors, actuators and controller boards in close-spaced builds.Each end has a keyed PH2.0-4P female connector to help pre...
6+1 Microphone Array
A 6+1 MEMS microphone array built around seven MSM261S4030H0 high-sensitivity digital silicon microphones. Designed for advanced audio applications including noise suppression, echo cancellation, reverb reduction, and sound source localisation. The array outputs raw digital audio over I2S, elimi...
ESP32-C6 WROOM Module - 16MB (PCB Antenna)
·
The ESP32-C6-WROOM-1 is Espressif's first Wi-Fi 6 module, integrating 2.4 GHz Wi-Fi 6 (802.11ax), Bluetooth 5.3 (LE), and IEEE 802.15.4 (Thread/Zigbee) on a single chip. Built around a high-performance 32-bit RISC-V core clocked up to 160 MHz plus a low-power RISC-V core at 20 MHz, it offers stro...
Serial Wifi Module- USR232
This Serial WiFi module is you best choice for you to connect your application to the internet. It is a complete ultra low power embedded TCP/IP solution. It is a standalone, embedded wireless 802.11b/g networking module. It incorporates a 2.4GHz radio, processor, TCP/IP stack, power management t...
PH2.0-4P Male-to-Male Jumper Cable - 10cm (10 Pack)
·
A 10-pack of PH2.0-4P male-to-male cables for connecting Boson modules, UNIHIKER boards, and other modular electronics. The polarised 4-pin connectors ensure correct orientation and prevent reverse insertion. Key Features Polarised Connectors – Prevents incorrect insertion 4-Pin PH2.0 – Male ...
HUSKYLENS 2 WiFi Module (Wireless AI Vision and AIoT)
·
The HUSKYLENS 2 WiFi Module is a plug-and-play USB expansion accessory that adds high-speed Wi-Fi 6 connectivity to the HUSKYLENS 2 AI vision sensor. Transform your HUSKYLENS 2 from a wired peripheral into a fully wireless intelligent node. This module enables real-time wireless image and data t...
PH2.0 4-Pin Male-to-Male Cable 20cm for Boson/UNIHIKER (10 Pack)
·
This pack of cables is designed for linking sensors, expansion boards and controllers in modular electronics projects. Each cable has 4-pin polarised PH2.0 male connectors on both ends, making them suitable for Boson, UNIHIKER and other PH2.0-based systems.Connector type: PH2.0 4-pin male to male...
3.2" 320x820 RGB TTL TFT Display with Capacitive Touch
·
This long rectangular TFT module is made for advanced display projects that need a striking, high-pixel-count screen. The 3.2" IPS panel provides 320x820 18-bit full-colour pixels, with colour that remains clear up to 80 degrees off-axis in any direction.The display uses an ST7701S driver with bo...
UNIHIKER M10 IoT Single Board Computer with Black Silicone Case
·
The UNIHIKER M10 is a compact single-board computer featuring a 2.8-inch touchscreen, Wi-Fi, Bluetooth 4.0, and a suite of built-in sensors. Running Debian Linux on a quad-core ARM Cortex-A35 processor with 512 MB RAM and 16 GB flash, it's ready to go out of the box with pre-installed Jupyter Not...
OCTOPUS OLED Display
OCTOPUS OLED Display is an OCTOPUS series electric brick with 128X64 OLED display.OLED display has characters of thin thickness, high brightness, self-emission, wide resolution and visual angle, wide temperature range and low power consumption,etc..It can be used for small patterns, alphabets,...
2x3A DC Motor Driver Carrier Board for UNIHIKER M10
·
This DFRobot motor driver carrier board is purpose-built for the UNIHIKER M10, featuring a tilted edge connector slot that positions the screen at an optimal viewing angle. It integrates a dual 3 A DC motor driver with separate motor power, plus onboard RGB LEDs and infrared transmitter/receiver....
Type-C L-Shaped Male to Female Extension Cable for UNIHIKER M10
·
##Introduction This product is a carefully selected cable designed for Type-C port conversion on UNIHIKER M10. It is made of silicone material and features a flat, flexible ribbon cable design. With its ultra-thin and mini size, it maximizes space-saving during project development.Note: Please ha...
