All Products
Showing 21-40 of 56 products · 9 unavailable products hidden
Gravity: GP8211 I2C 15-bit DAC Module (0-5V/10V)
·
##Introduction This is a 1-channel DAC module with I2C communication, a resolution of 15-bit, and an accuracy of 0.01%, capable of generating analog voltage outputs of 0-10V or 0-5V. The 0-10V or 0-5V voltage output is a standard driving method. It can be widely used in automation control scenari...
Gravity: GP8512: 1-Channel 15bit I2C to 0-2.5V/VCC DAC Module
·
##Introduction This is a 1-channel analog voltage output DAC module with I2C communication, 15-bit resolution, and 0.01% precision. It is well-suited for control projects operating within the 3.3V range, such as ESP32, Raspberry Pi, STM32, and other microcontrollers that require analog signal out...
Gravity: I2C 12-Bit DAC Module
The DFRobot Gravity 12-Bit I2C DAC Module is a compact digital-to-analogue converter based on the MCP4725 chip. It accurately converts digital values to precise analogue voltage signals, providing far cleaner output than PWM-based approaches from microcontrollers. With on-board EEPROM, the modul...
Gravity: I2C 4-20mA DAC Module (Arduino Compatible)
The Gravity I2C 4-20mA DAC Module outputs 0–25 mA of current controlled via I2C, with high-accuracy 4–20 mA output available after calibration (0.2% linearity error). Built around the GP8302 chip, it provides 12-bit resolution and is compatible with Arduino, enabling precise current-loop control ...
USB Charger for 7.4V LiPo Battery
Still using a big, bulky, traditional power adapter to charge your lithium battery? DFRobot provides you with a compact and efficient 7.4V lithium battery USB charger, only the size and weight of an ordinary Gravity sensor. With just a mobile phone AC adapter (or power bank) and an Android dat...
10-Way Terminal & Socket
A 10-way 3.5mm-pitch PCB terminal block paired with a matching rising clamp screw socket. Together they provide robust, solderless I/O and power connections for prototyping and production boards alike. The terminal block solders to your PCB at a 90° angle, while the rising clamp socket plugs in ...
AltIMU-10 v5 Gyro, Accelerometer, Compass, and Altimeter (LSM6DS33, LIS3MDL, and LPS25H Carrier)
The Pololu AltIMU-10 v5 is a compact inertial measurement unit (IMU) and altimeter that combines a gyroscope, accelerometer, magnetometer, and barometric pressure sensor on a single board. It provides ten independent measurements — pressure, 3-axis rotation, 3-axis acceleration, and 3-axis magnet...
Adafruit INA228 85V 20-bit I2C Power Monitor Breakout
·
This breakout brings the INA228 power monitoring chip out to an easy-to-use board for measuring DC current, bus voltage and calculated power on either the high side or the low side of a circuit. It combines a wide common-mode range of up to +85VDC with a 20-bit ADC, giving you precise readings fr...
DFRobot GP8630N 16-bit I2C/PWM to ±10V & 4-20mA DAC Module
·
This Gravity DAC module converts I2C or PWM digital signals into stable analogue voltage or current outputs for control and automation projects. Built around the GP8630N chip, it supports output modes such as ±10V, 0-5V, 0-10V and 4-20mA, with 16-bit resolution available in I2C mode.The symmetric...
Gravity: Analog Infrared CO2 Sensor For Arduino (0~5000 ppm)
The concentration of carbon dioxide (0.03% usuallly) is related to daily life. Recently, there's a study showing that the atmospheric CO2 content has reached 0.0385% (385 ppm) which is the highest value since 2.1 million years. The raise of atmospheric CO2 content to some extent results in gl...
Gravity: Analog TDS Sensor/Meter for Arduino
The Gravity Analog TDS Sensor is an Arduino-compatible kit for measuring Total Dissolved Solids (TDS) in water. TDS indicates how many milligrams of soluble solids are dissolved per litre — the higher the value, the less clean the water. This sensor outputs a 0–2.3V analog signal that can be read...
LattePanda 5MP UVC Camera
The LattePanda 5MP UVC Camera is a compact, high-quality USB camera module built around the OV5640 image sensor. As a UVC (USB Video Class) device, it requires no driver installation on Windows, Linux, or Android — just plug in and go. With auto-focus, automatic low-light correction, and OTG sup...
SparkFun OpenLog Data Collector with Machinechat - Base Kit
The Base version of the SparkFun OpenLog Data Collector Kit with Machinechat is an easy way to organize and display your data with the OpenLog Artemis and JEDI One. The SparkFun OpenLog Artemis (without IMU) is an open source data logger that comes preprogrammed to automatically log GPS / GNSS, s...
Thing Plus ESP32 WROOM (U.FL)
·
Built around Espressif’s ESP32-WROOM-32UE module, this Thing Plus board gives you a compact foundation for connected projects that need WiFi, Bluetooth and a flexible antenna setup. The onboard U.FL connector lets you attach a suitable external antenna for installations where a PCB antenna is not...
DFRobot DFRduino UNO R3 Kit with IO Expansion Shield & USB Cable
·
This compact DFRobot microcontroller bundle is designed for learning, prototyping and physical computing projects. The DFRduino Uno V3.0 is fully compatible with Arduino UNO R3 and the Arduino IDE open-source development environment, which uses the Processing / Wiring language.The board is based ...
FireBeetle 2 ESP32-C5 IoT Development Board (2.4 / 5GHz Wi-Fi 6, Solar Charging, Home Assistant)
·
Built around Espressif's ESP32-C5, this compact FireBeetle board is designed for smart home, robotics and wider IoT projects that need strong wireless performance with low power use. It combines a 240 MHz RISC-V processor with dual-band 2.4 GHz and 5 GHz Wi-Fi 6, BLE, Zigbee and Thread support.Po...
FireBeetle 2 ESP32-C5 Wi-Fi 6 IO Expansion Kit
·
This development kit combines the FireBeetle 2 ESP32-C5 microcontroller board with a dedicated solderless IO expansion shield, giving you a practical platform for smart home and IoT prototypes.The ESP32-C5 brings dual-band Wi-Fi 6 on 2.4 GHz and 5 GHz, plus Bluetooth 5, Thread and Zigbee support....
Thing Plus ESP32-WROOM (Micro-B)
·
Built around Espressif's ESP32-WROOM module, this Feather-compatible development board is a handy starting point for WiFi, Bluetooth and battery-powered IoT projects. The dual-core Xtensa 32-bit LX6 processor runs at up to 240MHz, with 16MB of embedded flash and 520KB of internal SRAM on hand for...
SparkFun Thing Plus - ESP32 WROOM (USB-C)
The SparkFun ESP32 WROOM Thing Plus is a Feather-compatible development board built around Espressif's ESP32-WROOM module, featuring USB-C, integrated Wi-Fi and Bluetooth, a microSD card slot, LiPo battery management with fuel gauge, and a Qwiic I2C connector for plug-and-play sensor expansion. ...
Adafruit Feather M0 Bluefruit LE
·
The Feather M0 Bluefruit LE combines an ATSAMD21G18 ARM Cortex M0 processor with a Bluetooth Low Energy module, native USB, and LiPo battery charging. With the power of a 48 MHz ARM core and 256KB of flash, it provides significantly more processing headroom than the 32u4-based Bluefruit while mai...
