All Products

SKU: AF-4031 · MPN: 4031

Pipe audio in or out of your project with this very handy breadboard-friendly audio jack. It's a stereo jack so you get left and right channels as well as a ground pin. You can use any 3.5mm stereo cable with this jack. The pins are on 0.1" spacing so it plugs very solidly (and vertically!) into ...

SKU: AF-368 · MPN: 368

A simple adapter that converts a 2.1 mm DC barrel jack to screw terminals, making it easy to connect a DC power supply to boards or projects that lack a DC jack. The terminals are labelled with positive and negative polarity, assuming a centre-positive configuration (the most common type). Key F...

SKU: SF-DEV-26586 · MPN: DEV-26586

The W55RP20-EVB-Pico is an evaluation board for the W55RP20, a chip that combines the W5500 wired TCP/IP controller with the RP2040 microcontroller. It works much like a Raspberry Pi Pico, with the addition of W5500-based wired Ethernet.The board pinout is directly connected to the RP2040 GPIO an...

SKU: AF-2888 · MPN: 2888

A BNC (Bayonet Neill–Concelman) male plug with a screw terminal block for solderless connections. Use stranded or solid-core wire and a small screwdriver to create custom wiring jigs for test equipment, video signals, and more — no soldering required. Key Features Screw Terminal Block – Solder...

SKU: DF-TEL0159

SIM8262E-M2 is a 5G wireless communication module that supports 5G NR (NSA/SA), LTE-FDD, LTE-TDD, and WCDMA, and can meet the 3GPP R16NR specification. The module supports maximum 3.0Gbps downlink rate. It has optional GNSS system including dual-band GPS, GLONASS, BeiDou, Galileo, and QZSS.The SI...

SKU: AF-1667 · MPN: 1667

This compact 7" IPS display delivers 1280×800 (720p) resolution with built-in 3W stereo speakers and multiple video inputs including HDMI, VGA, and composite (NTSC/PAL). Simply connect a 9–12V DC adapter and a video source for an instant mini monitor. The display features front-panel buttons for...

SKU: AF-3346 · MPN: 3346

The Adafruit I2S 3W Stereo Speaker Bonnet adds high-quality digital audio output to any Raspberry Pi with a 2×20 GPIO header. Using the I2S digital sound standard, audio data goes directly to the onboard Class D amplifier — delivering crisp, static-free stereo sound without relying on the Pi's he...

SKU: AF-2912 · MPN: 2912

If you need to connect an RJ45 cable (a.k.a Ethernet) to a board that doesn't have an Ethernet jack - this adapter will come in very handy! No soldering required. Just push the little buttons and slide in your stranded or solid-core wire. Note that these aren't recommended for actual Ethernet ...

SKU: AF-911 · MPN: 911

Yes, this is an adorable miniature television! The visible display measures only 2.0" diagonal, the TFT comes with a NTSC/PAL driver board. The display is very easy to use - simply connect 6-12VDC to the red and black wires, then connect a composite video source to the yellow and black wire. Voil...

SKU: SF-PRT-11476

This barrel jack plug is great for adding a common connector to the end of our wires. This jack is compatible with 5.5mm barrel jacks that have a 2.1mm center pole diameter. The outer shell unscrews to reveal solder terminals and a crimp strain relief. The outer shell has strain relief as well.Do...

SKU: AF-3629 · MPN: 3629

A solderless breakout adapter that connects a USB-A female socket to a 5-pin screw terminal block. Simply use a small screwdriver to open the terminal blocks, slide in your stranded or solid-core wire, and tighten — no soldering required. The removable terminal block is more durable than soldere...

SKU: AF-5647

The Adafruit STEMMA Audio Amp is a compact mono Class D amplifier based on the PAM8302 chip, delivering up to 2.5W into 4 Ω speakers from a 2.0–5.5V DC supply. With over 90% efficiency at half a watt into 8 Ω, it's ideal for portable and battery-powered audio projects. This plug-and-play STEMMA ...

SKU: AF-2913 · MPN: 2913

If you need to connect an RJ45 cable (a.k.a Ethernet) to a board that with an Ethernet Jack - this adapter will come in very handy! No soldering required. Just use a slim screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire and re-tighten. Note that these aren'...

SKU: AF-910 · MPN: 910

Yes, this is an adorable miniature television! The visible display measures only 1.5" diagonal, the TFT comes with a NTSC/PAL driver board. The display is very easy to use - simply connect 6-12VDC to the red and black wires, then connect a composite video source to the yellow and black wire. Voil...

SKU: AF-1466 · MPN: 1466

This UL-listed switching power supply delivers a clean, regulated 5V DC output at up to 4A (4,000mA / 20W) via a standard 5.5×2.1mm centre-positive DC barrel jack. It accepts 110–240V AC input and is ideal for powering LED matrices, NeoPixel strips, and other high-current 5V projects. Key Featur...

SKU: AF-2711 · MPN: 2711

With the Pi-EzConnect you can connect all sorts of electronics to a single Raspberry Pi  with no soldering or breadboarding! This HAT has screw-terminals for each pin on the Pi Header Key features: Solderless or soldered connections for all GPIO’s on a Raspberry Pi Mini proto area for...

SKU: PI-PPMB00130

The Amp:bit is the easiest way to connect a speaker or headphones to your BBC micro:bit. It plugs directly onto the edge connector and provides a 3.5mm headphone jack, solder pads for a speaker, and a volume control wheel — everything you need to add audio to your micro:bit projects. If you have...

SKU: DF-FIT0849

This Ethernet RJ45 Female Plug to 8-Pin Terminal Block provides a solder-free way to break out an RJ45 Ethernet connection to individual screw terminals. The standard RJ45 port features a metal shielding layer for electromagnetic interference protection, while the detachable terminal block allows...