All Products

SKU: EC-DTS09534M

This motor/ servo shield is for Micro: bit, it provides a simple way to add motor driving capability to a micro: bit. The shield can drive 2 motors, 2 servos, and allow the motors to be driven with forward, reverse, stop control. It’s easy to add the motor to the shield, and there is an integrate...

SKU: RP-SC0229-1 · MPN: 4301

The official Raspberry Pi Foundation case for the Raspberry Pi 4 Model B. This solid ABS enclosure in the classic red and white colour scheme keeps your Pi secure while providing labelled cut-outs for all connectors: micro HDMI, USB-C power, Ethernet, USB ports, and the GPIO header. The snap-fit...

SKU: RP-SC0626 · MPN: SC0626

The official 5V 2.5A power supply provides reliable power for your Raspberry Pi 3 or Raspberry Pi Zero. With an Australian plug and 1.5m Micro-USB cable, it delivers consistent, stable power for reliable operation. Key Features 5V @ 2.5A Output – 12.5W for stable Pi operation Australian Plug ...

SKU: PI-RPI-020

The Official Raspberry Pi Zero Case is designed to fit both the Pi Zero and Pi Zero W. It ships with three interchangeable lids so you can configure it for different use cases: a plain lid for a clean finish, a GPIO lid for header access from above, and a camera lid with a short ribbon cable for ...

SKU: AF-4117 · MPN: 4117

A flexible LED strip encased in translucent silicone rubber that produces a smooth, neon-like glow in purple. Unlike traditional neon, it requires no special transformers or glass tubing — just connect 9–12 V DC and it lights up. The silicone diffuser creates an even, continuous glow rather than ...

SKU: AF-1445 · MPN: 1445

A clean, rounded 16mm panel-mount momentary pushbutton in red. This normally-open micro-switch connects the contacts only while pressed, making it a straightforward input for any project enclosure or control panel. Key Features Momentary Action – Normally open; contacts connect only while pres...

SKU: LB-32G-MICROSD

A 32GB Class 10 microSD card pre-loaded with the latest Raspberry Pi OS, ready to boot on any Raspberry Pi model including the Raspberry Pi 5. Simply insert the card, power on your Pi, and you're up and running — no manual OS installation required. These microSD cards are tested by the Raspberry...

SKU: LB-LR0387

This is the assembled version of the Pi T-Cobbler Plus.  It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2, Pi 3 & Pi 4! (Any Pi with 2x20 connector)Each order comes with a 40 pin ribbon cable and assembled T-Cobbler Plus. You can plug the 40-pin GPIO cable between th...

SKU: PI-CAB0307

This 20 cm flat-flex cable (FFC) connects the Raspberry Pi Camera Module to the CSI port on your Raspberry Pi. A shorter cable is useful for compact builds, enclosures, and projects where the standard 15 cm cable is too long or too short. Specifications Length: 20 cm Type: FFC (flat-flex cabl...

SKU: DF-FIT0834

This ultra-thin flexible LED strip from DFRobot packs 138 warm white SMD 0805 LEDs into a single metre, with an incredibly slim profile of just 2.5mm wide and 1mm thick. It's ideal for lighting tight spaces where standard LED strips won't fit. Operating at 3V, the strip is compatible with microc...

SKU: RP-SC1128

An adapter cable for connecting Raspberry Pi Camera modules to the Raspberry Pi 5. The Pi 5 uses a smaller 22-way, 0.5mm-pitch "mini" FPC connector for its two four-lane MIPI ports, while current Raspberry Pi cameras use the older 15-way, 1mm-pitch "standard" connector — this cable bridges the tw...

SKU: RP-SC1227 · MPN: SC1227

The official Raspberry Pi 7" Touchscreen Display enables all-in-one projects like tablets, infotainment systems, kiosks, and embedded devices. The 800×480 capacitive touchscreen supports 10-finger touch and connects directly to your Pi's DSI port. With touchscreen drivers built into Raspberry Pi...

SKU: EC-MCS02930M

This Adruino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motor or two 4-wire stepper and two 5v servo. It drive the DC motor and stepper with the L293D,and it drive the servo with arduino pin9 and pin10. Features Be able to drive 4 DC motor and...

SKU: SF-COM-09420

Resonators function like crystals, but are a lower cost solution that does not require external caps.These resonators are +/-0.5% or better from -20C-+80C. These resonators have built-in load capacitors so no external caps are needed.

SKU: AF-285 · MPN: 285

This weatherproof RGB LED flexi-strip features 30 LEDs per metre on a white PCB backing with a silicone weatherproof coating and 3M adhesive on the reverse. The entire strip is controlled as one unit — drive the R, G, and B channels with a microcontroller and three N-channel MOSFETs (or NPN trans...

SKU: AF-5864 · MPN: ADA5864

This flexible LED strip is packed with cool white LEDs on both sides, giving you bright, clean illumination with close to 360-degree light output. The strip is only 6mm wide, making it easy to tuck into signage, props, architectural models, displays and other compact lighting builds.The LEDs are ...

SKU: AF-3415 · MPN: 3415

We've got to hand it to the Pi Foundation - adding a camera port and built-in WiFi to the already awesome Pi Zero was a brilliant move. Now you can add one of the awesome Raspberry Pi cameras to your Pi Zero W to make a super low-cost, functional camera. This version includes the 8 MegaPixe...

SKU: LB-LS0014

Check out these big 10mm through-hole LEDs! The clear epoxy package causes these LEDs to have a bright glow. Features: Forward Voltage (R/G/B): 2.0 / 3.2 / 3.1V Forward Current: 20mA Intensity (R/G/B): 550 / 250 / 700 mcd Common Cathode This is a bag of 20 RGB LEDS

SKU: AF-5816 · MPN: ADA5816

SKU: RP-SC0271

The official Raspberry Pi 2-metre Micro-HDMI to HDMI cable connects your Raspberry Pi 4 to any HDMI-capable monitor or television. This high-quality cable supports up to 4Kp60 video output from the Pi 4's Micro-HDMI ports. Key Features Official Raspberry Pi Accessory – Designed and tested for ...