All Products
AI Overview
Copper tape is commonly used for low-profile conductive traces, RF/EMI shielding, and antenna making—the main choice point is width/length and whether you need conductive adhesive (for reliable electrical continuity across overlaps).
Popular copper tape options (electronics/crafting)
- Copper Tape ($7.05) — general-purpose copper tape for traces/shielding.
- Adhesive Copper Tape 5mm x 10m ($8.90) — 5mm width, 10m length, solderable adhesive-backed copper tape.
- 20mm Copper Tape ($8.20) — 20mm wide, 20m roll with double-sided conductive adhesive (great for wider shielding/grounding runs).
Conductive-adhesive copper tape (best for shielding & overlapping seams)
- Copper Tape - Conductive Adhesive, 5mm (60ft) 20m ($5.40) — 5mm, 20m, conductive adhesive for continuity through overlaps.
- Copper Tape - Conductive Adhesive, 5mm (100ft) ($5.05) — extra-long roll for lots of runs.
- Copper Tape - Conductive Adhesive, 5mm (50ft) ($12.75) — 5mm, 50ft.
- Copper Tape - Conductive Adhesive, 2 (50ft) ($64.85) — 2\" (50.8mm) wide for covering larger areas.
Copper foil tape (conductive adhesive)
- Copper Foil Tape with Conductive Adhesive - 6mm x 5 meters long ($11.25) — 6mm wide, flexible/solderable foil tape.
- Copper Foil Tape with Conductive Adhesive - 6mm x 15 meter roll ($12.85) — same 6mm width, longer roll.
- Copper Foil Tape with Conductive Adhesive - 25mm x 15 meter roll ($47.60) — 25mm wide for broader shielding coverage.
Non-conductive-adhesive copper tape (for traces where you’ll solder/join mechanically)
- Copper Tape - 5mm (50ft) ($10.90) — 5mm wide.
- Copper Tape - 2 (50ft) ($69.55) — 2\" wide.
Showing 21-35 of 35 products · 25 unavailable products hidden
EL wire starter pack - Aqua 2.5 meter (8.2 ft)
·
A little bundle to get you started! This project pack contains: 2.5 meters (over 8 ft) of high-brightness, long-life EL wire in Aqua, the brightest and best looking EL color we carry. 2.5 meters is the maximum amount for the pocket driver - it is cut and soldered so it's ready to go! Poc...
Chibi Clip
An essential companion to the Chibi Chip, the Clip enables rapid testing and re-use of the Chip. With the Clip, attaching (and detaching) your Chip to circuits built on paper is as easy as using a clothespin. The Clip was designed with classrooms and teachers on a tight budget in mind. Solderi...
EL wire starter pack - White 2.5 meter (8.2 ft)
·
A little bundle to get you started! This project pack contains: 2.5 meters (over 8 ft) of high-brightness, long-life EL wire in White. 2.5 meters is the maximum amount for the pocket driver - it is cut and soldered so it's ready to go! Pocket EL inverter runs on 2 AA Alkaline or rechargeabl...
APA102C-5050 SMD Addressable RGB LED - Cut Tape
·
This APA102C, also known as DotStar, is a 5050-sized SMD addressable RGB LED for adding bright, colourful lighting to custom boards and compact projects.It has an integrated control circuit embedded inside the LED package, with the tiny controller chip and gold bond wires visible if you look clos...
Aluminum Case for Raspberry Pi 5 Single Board Computer
An aluminium alloy enclosure for the Raspberry Pi 5, featuring a comprehensive cooling system with copper heatsinks, an adjustable-speed fan, and an acrylic top cover with ventilation holes. The fan automatically adjusts its speed based on temperature, keeping the Pi 5 cool and stable during dema...
8-Position SMD DIP Switch
·
This compact surface-mount DIP switch provides 8 individual switch positions for adding simple, user-selectable controls to a PCB.Each position is an SPST slide switch, making it suitable for general control switching in embedded projects, configuration inputs, mode selection and similar low-curr...
AL Heat Sink (With adhesive tape) - 13*13*7mm
A compact aluminium heat sink with pre-applied 3M 8810 thermal adhesive tape on the back. Simply peel off the blue protective film and stick it directly onto your IC or chip — no thermal paste or glue required. The adhesive bond is strong and long-lasting. Suitable for stepper motor drivers (suc...
Electroluminescent (EL) Tape/Strip Starter Pack - 100cm - Blue
·
Get glowing in seconds with our Electroluminescent (EL) Tape Starter Pack! This pack contains everything you need for your first EL tape project, even the batteries. Includes: 1 meter long x 1 cm wide EL tape strip in Blue Portable 4xAAA inverter powerful enough to drive a full meter of s...
Electroluminescent (EL) Tape/Strip Starter Pack - 100cm - Red
·
Get glowing in seconds with our Electroluminescent (EL) Tape Starter Pack! This pack contains everything you need for your first EL tape project, even the batteries. Includes: 1 meter long x 1 cm wide EL tape strip in Red Portable 4xAAA inverter powerful enough to drive a full meter of st...
Nylon Fabric Squares with Conductive Adhesive - 10cm x 10cm - 3 pack
·
With our fun assortment of conductive materials, cosplay and wearables have never been easier to craft! These Conductive Nylon Squares go great with our other interesting materials, such as copper tape, ITO glass or plastic, conductive inks, etc. We found that the metallic nylon fa...
Conductive Nylon Fabric Tape - 8mm Wide x 10 meters long
·
With our fun assortment of conductive materials, cosplay and wearables have never been easier to craft! This Conductive Nylon tape goes great with our other interesting materials, such as copper tape, ITO glass or plastic, conductive inks, etc. We found that the metallic nylon fabric ha...
JST Breakout for E-Textiles and Paper Circuits
This E-textiles board is a breakout for a JST, so you can sew it onto a garment or use it in Paper Circuits! The JST breakout board can be easily sewn through the large holes. For paper circuits, simply apply copper tape on top of it.A wearable lithium polymer battery or wearable lipo also kno...
Polyimide Tape .5"
Polyimide (Kapton-type) tape is a high-temperature-resistant adhesive tape used in electronics, soldering, and insulation applications. With excellent thermal conductivity, low outgassing, and minimal radiation interference, it is widely used for masking during wave soldering, powder coating, and...
Flashing RGB LED for Paper Circuits
This flashing RGB LED is designed for paper circuits, greeting cards, and craft projects. It automatically cycles through random colour patterns with no programming or microcontroller required — just connect it to a coin cell battery and watch it go. Perfect for adding eye-catching colour to han...
ITO (Indium Tin Oxide) Coated Glass - 50mm x 50mm
·
A 50 × 50 mm glass sheet coated on one side with Indium Tin Oxide (ITO) — a transparent, electrically conductive film. The same material is used in LCD/OLED manufacturing and scientific research. Experiment with creating conductive traces by scraping away the ITO coating, or explore transparent e...
