All Products

SKU: AF-4862 · MPN: 4862

The Adafruit CYBERDECK Bonnet is a GPIO extender for the Raspberry Pi 400 that lets you plug any Pi bonnet, mini-HAT, or pHAT into the back of the Pi 400 at an angled position. It duplicates every GPIO pin from input to output, so your add-on boards work without any pin limitations. In addition ...

SKU: AF-3649 · MPN: 3649

The 64×64 RGB LED Matrix with 2.5mm pitch packs 4096 bright RGB LEDs into a compact, ultra-high-density panel. With the tightest pixel spacing in the 64×64 range, this panel produces sharp, detailed images ideal for close-up indoor viewing. This panel uses a non-standard 5-address (ABCDE) multip...

SKU: AF-4122 · MPN: 4122

The Adafruit CharliePlex LED Matrix Bonnet features a 16×8 grid of warm white LEDs driven by the IS31FL3731 charlieplex driver over I2C. Simply plug it onto any Raspberry Pi with a 2×20 header for a bright, programmable 128-LED display — no soldering required. Each of the 128 LEDs supports indiv...

SKU: AF-4197 · MPN: 4197

Add a crisp, paper-like display to your microcontroller project with the Adafruit 2.13" Monochrome eInk Breakout. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its image even with power completely disconnected — just like printed paper. An onbo...

SKU: WS-29380 · MPN: 29380

This 0.71″ round LCD module packs a 160 × 160 pixel IPS display with 65K colours into a tiny 20 × 22 mm footprint. Driven by the GC9D01 controller over a 4-wire SPI interface, it's easy to integrate with Raspberry Pi Pico, ESP32, Arduino, and other microcontrollers using minimal IO pins. The rou...

SKU: AF-3527 · MPN: 3527

The Adafruit PiOLED is a compact 128×32 monochrome OLED display that plugs directly onto your Raspberry Pi's GPIO header. At just 1 inch diagonal, it's the perfect status display for headless Pi projects — showing IP addresses, system stats, sensor readings, or custom graphics without needing a f...

SKU: AF-3203 · MPN: 3203

The Adafruit Perma-Proto Bonnet Mini Kit is a prototyping daughter board sized for the Raspberry Pi Zero. It plugs directly onto the Pi's 2×20 GPIO header and provides a grid of 0.1″ soldering holes connected in a familiar breadboard pattern — making it easy to transfer circuits from a solderless...

SKU: AF-4863 · MPN: 4863

The Adafruit CYBERDECK HAT is a GPIO extender for the Raspberry Pi 400 that lets you plug full-size HAT displays and add-on boards into the back of the Pi 400 at a convenient angle. It duplicates every GPIO pin from input to output, so your HATs work without any pin limitations. In addition to t...

SKU: AF-2280 · MPN: 2280

The Adafruit Pi Box Plus is a crystal-clear acrylic enclosure designed specifically for the Raspberry Pi Model A+. Six laser-cut pieces slide together and secure with four screws for a sturdy, professional-looking build. A hinged top provides easy access to GPIO and onboard headers, while built-i...

SKU: AF-2258 · MPN: 2258

The Adafruit Raspberry Pi B+ / Pi 2 / Pi 3 Case is a durable polycarbonate enclosure with a smoke-tinted base and clear top. Designed by Mike Doell, it offers a clean, professional look while keeping your Pi protected and fully accessible. The case features slim openings for all cables, a bevell...

SKU: AF-2310 · MPN: 2310

The Adafruit Perma-Proto HAT for Pi Mini Kit is a full-sized prototyping daughter board for any Raspberry Pi with a 2×20 GPIO header (Pi Zero, A+, B+, Pi 2, 3, 4, 5). It provides a grid of 0.1″ soldering holes connected in a familiar breadboard pattern — making it easy to transfer circuits from a...

SKU: AF-2883 · MPN: 2883

The Adafruit Pi Protector for Raspberry Pi Zero is a minimal, crystal-clear acrylic protector that keeps your pocket-sized Pi Zero safe without adding bulk. Just two acrylic pieces secured with four screws — sleek, lightweight, and perfect for carrying in your pocket. All edge connectors remain ...

SKU: AF-5038 · MPN: 5038

Witty Pi 3 Mini adds a real-time clock (DS3231SN) and intelligent power management to your Raspberry Pi in a compact bonnet/pHAT form factor. It allows you to schedule startup and shutdown times, define complex ON/OFF sequences via simple scripts, and fully cut power to the Pi and all USB periphe...

SKU: AF-2359 · MPN: 2359

The Adafruit Raspberry Pi A+ Case is a slim, durable polycarbonate enclosure designed specifically for the Raspberry Pi Model A+. With a smoke-tinted base and clear top, it offers a clean, professional look while keeping your Pi protected and accessible. Designed by Mike Doell, the case features...

SKU: AF-5705

Witty Pi is an add-on board that adds real time clock and power management to your Raspberry Pi. It can define your Raspberry Pi’s ON/OFF sequence and significantly reduce energy use. Witty Pi 4 L3V7 is the new member of the fourth generation of Witty Pi, and it is designed to work with 3.7V Lith...

SKU: AF-3252 · MPN: 3252

The Adafruit Raspberry Pi Zero Case is a compact two-piece polycarbonate enclosure that protects your Pi Zero while keeping all ports accessible. Designed by Mike Doell, it features a sleek black base and clear top that snap together without screws. The case provides slim openings for mini HDMI,...

SKU: AF-801 · MPN: 801

The Adafruit Prototyping Pi Plate Kit snaps onto your Raspberry Pi and provides a generous prototyping area with all GPIO, I2C, SPI, and power pins broken out to labelled 0.1" strips and 3.5 mm screw-terminal blocks. It's designed for the original Pi Model A/B but also works with any 40-pin Pi (A...

SKU: AF-5806 · MPN: ADA5806

This round TFT module is aimed at advanced display projects that need a compact circular screen with plenty of pixels. The 2.1" diagonal IPS panel provides 480x480 16-bit full-colour output, with good colour visibility up to 80 degrees off-axis in any direction.This version does not include a tou...

SKU: AF-1754 · MPN: 1754

The Adafruit Pi T-Cobbler breaks out all the power, GPIO, I2C and SPI pins from the Raspberry Pi's 26-pin header onto a solderless breadboard in a T-shaped layout. The wider T-shape makes the pin labels easier to read compared to the compact Cobbler. Comes fully assembled with a 26-pin ribbon cab...

SKU: AF-3346 · MPN: 3346

The Adafruit I2S 3W Stereo Speaker Bonnet adds high-quality digital audio output to any Raspberry Pi with a 2×20 GPIO header. Using the I2S digital sound standard, audio data goes directly to the onboard Class D amplifier — delivering crisp, static-free stereo sound without relying on the Pi's he...