All Products
AI Overview
Here are the most relevant alligator clip options, depending on how you want to connect:
Standard alligator clip leads (clip-to-clip)
- Alligator Test Leads - 10 Pack ($5.60) — basic colour-coded alligator-to-alligator leads for general bench/prototyping.
- Alligator Test Leads - Multicolored (10 Pack) ($11.60) — 10-pack multicolour leads (good general-purpose set).
- Large Alligator Test Leads - 10 Pack 45mm Clip ($6.55) — 45mm larger clips for a stronger grip.
- Large Alligator Clip Test Lead (set of 10) ($9.95) — 20" long, 10-piece set.
- Small Alligator Clip Test Lead (set of 6) ($5.90) — smaller clips for tighter spots.
- Small Alligator Clip Test Lead (Set of 18) ($14.30) — 18 mini leads for fine-pitch work.
- Short Wire Alligator Clip Test Lead (set of 12) ($9.65) — short leads to reduce clutter on the bench.
- Bulk Alligator Test Leads - 10 x 10 Pack (100 in total) ($50.40) — best value for classrooms/labs (100 leads).
- 4mm Silicone Alligator to Alligator Test Probe x 10 ($39.10) — silicone-insulated, 1m leads (more flexible/robust).
Single replacement clip
- Alligator Clip ($1.00) — individual clip for DIY lead repairs/custom cables.
Alligator clip to jumper wires (breadboard-friendly)
- Alligator to Jumper Male 20cm 10 pin ($8.25) — mini alligator to male header pins.
- Alligator to Jumper Female 20cm 10 pin ($8.25) — mini alligator to female header.
- Small Alligator Clip to Male Jumper Wire Bundle - 6 Pieces ($8.80) / Small Alligator Clip to Male Jumper Wire Bundle - 12 Pieces ($15.95)
- Small Alligator Clip to Female Jumper Wire Bundle - 6 Pieces ($7.95)
Common adapter cables (alligator clips on one end)
- Power via barrel jack: 2.1mm DC Barrel Plug to Alligator Clips ($3.90) and 2.1mm DC Barrel Jack to Alligator Clips ($3.90)
- Banana plug to clips (bench PSU / test gear): Banana to Alligator Cable ($14.65) or higher-quality coax version Banana to Alligator Coax Cable ($17.00)
- Audio plug to clips: 3.5mm Mono Audio Plug to Alligator Clips ($4.35) or 2.5mm Mono Audio Cable to Alligator Clips ($1.75)
- USB power to clips: Double Alligator Clip to USB Male Cable Pack ($4.75) — quick 5V power from USB.
- Servo connector to clips: Servo to Alligator Clip Cable - Shrouded ($5.70)
Helpful add-on for using clips while soldering
- Soldering Iron Stand With Magnifier and Alligator Clip Clamps ($15.95) — “helping hands” style holder with clip clamps.
micro:bit-specific clip leads
Showing 1-20 of 44 products · 16 unavailable products hidden
Alligator Clip Test Cables (10 PCs Pack)
A pack of 10 colour-coded alligator-to-alligator clip test cables for quick, hands-free circuit connections. Each cable features strong, grippy clips on both ends and heavy-insulation copper wire — ideal for prototyping, testing, and classroom electronics projects. Key Features Alligator Clips...
Small Alligator Clip Test Lead (Set of 18)
·
A set of 18 colour-coded mini alligator clip test leads for solderless connections. Each 15″ (38cm) cable has a small, pointy alligator clip on both ends — ideal for gripping component leads, test points, and sewable pads on boards like micro:bit and Circuit Playground. Perfect for use with mult...
Alligator Test Leads - Multicolored (10 Pack)
A pack of 10 multicoloured alligator-to-alligator clip test leads — an essential for any electronics workbench. Whether you're making quick connections to test a circuit or extending your multimeter leads, these spring-loaded, rubber-shrouded clips provide secure, hands-free connections. Key Fea...
Alligator cables (Black ,Red ,Yellow) for micro:bit
Alligator clips (also known as crocodile clips) are one of the most useful tools on any maker's workbench. Whether you're testing a circuit, connecting a micro:bit to external components, or extending your multimeter leads, these spring-loaded clips make quick, reliable connections without solder...
Adafruit NeoPixel LED Strip w/ Alligator Clips - 30 LEDs/meter - 1 Meter - BLACK
·
A beginner-friendly NeoPixel strip with colour-coded alligator clips — no soldering or breadboard required. Simply clip onto your microcontroller and start glowing. The strip has 30 individually addressable RGB LEDs on a 1-metre black flex PCB with weatherproof sheathing. Uses SK6812 LEDs that w...
4mm Silicone Alligator to Alligator Test Probe x 10
A pack of 10 silicone-insulated alligator-to-alligator test leads, each 1 metre long. The 4 mm wire gauge and full-size alligator clips make these suitable for general electronics testing, prototyping, and bench work. Supplied in 5 colours (2 of each) for easy circuit identification. Specificati...
SparkFun Third Hand Kit
Are you frustrated with the lack of dexterity from most third hands? The SparkFun Third Hand gives you the ability to hold a board between two alligator clips on two flexible arms with multiple points of articulation. The arm’s wide range of articulation gives you access to any angle of the bo...
Short Wire Alligator Clip Test Lead (set of 12)
·
A set of 12 short alligator clip test leads for making quick temporary connections without soldering. Each lead has a vinyl-covered alligator clip on both ends, colour-coded across six colours for easy circuit identification. The short length minimises tangle on the workbench. Key Features 12-...
Double Alligator Clip to USB Male Cable Pack
A pack of two USB-A male to double alligator clip cables for supplying 5 V power from any USB port to breadboards, battery boards, and other devices without a dedicated power connector. Each cable has a red (+) and black (−) alligator clip on one end and a USB-A plug on the other. Key Features ...
Alligator Clip with Pigtail (10 Pack)
A 10-pack of cables with an alligator clip on one end and a bare hookup pigtail (male pin) on the other. These cables make it easy to connect alligator clips directly into breadboards, development boards, and any standard 0.1" pin header. Key Features Alligator Clip to Male Pigtail – Clip one ...
Alligator Clip with Pigtail (4 Pack)
A 4-pack of cables with an alligator clip on one end and a bare hookup pigtail (male pin) on the other. These cables make it easy to connect alligator clips directly into breadboards, development boards, and any standard 0.1" pin header. Key Features Alligator Clip to Male Pigtail – Clip one e...
Alligator Test Leads - 10 Pack
A pack of 10 colour-coded alligator-to-alligator clip test leads — an essential for any electronics workbench. Whether you're making quick connections to test a circuit or extending your multimeter leads, these spring-loaded, rubber-shrouded clips provide secure, hands-free connections. Key Feat...
Alligator Clip with Female Header (10 Pack)
A 10-pack of cables with an alligator clip on one end and a female header on the other. These cables bridge the gap between clip-based prototyping and standard 0.1" pin headers, making it easy to connect alligator clips directly to breadboards, development boards, and breakout modules. Key Featu...
2.1mm DC Barrel Plug to Alligator Clips
·
Connect a battery pack or bare wires to any device with a 2.1 mm DC barrel jack input using this adapter cable. Colour-coded alligator clips (red for centre-positive, black for ring-negative) clip onto battery terminals or exposed wires, while the moulded 2.1 mm barrel plug feeds power straight i...
Alligator to Jumper Male 20cm 10 pin
These compact jumper cables feature a premium male header pin on one end and a grippy mini alligator clip on the other — perfect for breadboarding with non-header-friendly boards and components. Clip onto a micro:bit, Circuit Playground, conductive materials, or even a banana, then plug straight ...
3.5mm Mono Audio Plug to Alligator Clips
·
A 3.5 mm mono audio plug cable with alligator clips on the other end, making it easy to clip onto development boards like the BBC micro:bit or Adafruit Circuit Playground. Also compatible with AT (accessibility technology) buttons that use 3.5 mm mono connections. Key Features 3.5 mm Mono Plug...
2.1mm DC Barrel Jack to Alligator Clips
·
Turn any 2.1 mm barrel-jack wall adapter into a handy bench power supply with this adapter cable. The moulded DC barrel jack connects to your power supply, while colour-coded alligator clips (red for centre-positive, black for ring-negative) let you quickly clip onto bare wires, terminals, or tes...
2AA Battery Holder with Cover and Switch and Large size Alligator
A 2×AA battery holder with a protective cover, built-in on/off switch, and large alligator clip leads. The alligator clips make it easy to connect to circuits, components, and conductive materials without soldering — ideal for quick prototyping and classroom projects. Key Features 2×AA Capacit...
Small Alligator Clip Test Lead (set of 6)
·
Connect this to that without soldering using these small alligator clip test leads. 18" long cables with color-coded alligator clips on both ends. You get 6 pieces in 6 unique colors. Strong and grippy, these always come in handy! We often use these in conjunction with a multimeter so we do...
Magnetic Third-Hand Kit
·
This handy third-hand kit is made for delicate, detailed work where keeping the job steady makes all the difference. It is well suited to electronics soldering, crafting, painting, replica and figurine work, macro photography, and other precision hobby tasks.The flexible arms use alligator clips ...
