All Products
Showing 1841-1860 of 11440 products
Adafruit NeoPixel Shield - 40 RGBW - Cool White - ~6000K
·
Put on your sunglasses before plugging in this shield — 40 eye-blistering RGBW LEDs adorn the NeoPixel Shield for a blast of configurable colour and white. Arranged in a 5×8 matrix, each pixel is individually addressable using just one pin (Digital #6 by default, changeable by cutting a trace). ...
Adafruit NeoPixel Shield - 40 RGBW - Natural White - ~4500K
·
Put on your sunglasses before plugging in this shield — 40 eye-blistering RGBW LEDs adorn the NeoPixel Shield for a blast of configurable colour and white. Arranged in a 5×8 matrix, each pixel is individually addressable using just one pin (Digital #6 by default, changeable by cutting a trace). ...
Adafruit NeoPixel Shield for Arduino - 40 RGB LED Pixel Matrix
·
Put on your sunglasses before plugging in this shield — 40 eye-blistering RGB LEDs adorn the NeoPixel Shield for a blast of configurable colour. Arranged in a 5×8 matrix, each pixel is individually addressable using just one pin (Digital #6 by default, changeable by cutting a trace). This is the...
Adafruit NeoPixel Slim LED Dot Strand - 20 LEDs at 2" Pitch
·
Need to add little dots of colour to a costume, wearable, or structure? The Adafruit NeoPixel Slim LED Dot Strand uses soft plastic cords of plated wire instead of a rigid PCB, making it easy to embed, sew over, or cast into any project. Each tiny NeoPixel dot is spaced every ~50 mm (~2″) along a...
Adafruit NeoPixel UV LED Strip with 32 LED/m - White PCB - 1M
·
Roll out the black light! The Adafruit NeoPixel UV LED Strip packs 32 individually addressable ultraviolet LEDs per metre onto a flexible white PCB with a weatherproof sheathing. Each LED package contains three UV diodes controlled via the standard NeoPixel (WS2812) protocol — just set all three ...
Adafruit NeoPXL8 FeatherWing for Feather M0 - 8 x DMA NeoPixels!
·
Drive massive NeoPixel installations without blocking your code. The NeoPXL8 FeatherWing enables 8 concurrent DMA NeoPixel strands from a single Feather M0, with up to 250 pixels per strand (2,000 total) — all running in the background via hardware DMA so your code keeps executing. The wing hand...
Adafruit NeoPXL8 FeatherWing for Feather M4 - 8 x DMA NeoPixels!
·
Drive massive NeoPixel installations without blocking your code. The NeoPXL8 FeatherWing for Feather M4 enables 8 concurrent DMA NeoPixel strands from a single Feather M4, with up to 1,750 RGB pixels per strand (14,000 total) — all running in the background via hardware DMA on the ATSAMD51's blaz...
Adafruit NeoPXL8 Friend - 8 x Strands NeoPixel Level Shifter
·
Drive up to 8 strands of NeoPixels simultaneously with DMA — no more blocking your code to push pixel data. The NeoPXL8 Friend is a standalone level-shifting breakout board that converts 3.3 V logic to 5 V for 8 independent NeoPixel outputs, with a breadboard-friendly form factor that works with ...
Adafruit NeoSlider I2C QT Slide Potentiometer with 4 NeoPixels
·
Add a smooth slide control to any I2C project with the Adafruit NeoSlider — a 75 mm linear slide potentiometer with four RGB NeoPixel underlights, all communicating over I2C via the onboard seesaw microcontroller. No analog pins needed on your main board. Thanks to the STEMMA QT / Qwiic connecto...
Adafruit NeoTrellis M4 Mainboard - featuring SAMD51
·
The NeoTrellis M4 Mainboard combines an ATSAMD51 Cortex M4 processor, a 4×8 grid of NeoPixel-lit elastomer button pads, stereo audio output, microphone input, and a triple-axis accelerometer into one compact, programmable board. Think of it as a button-mashing, light-flashing, tune-making powerho...
Adafruit NeoTrellis M4 with Enclosure and Buttons Kit Pack
·
Everything you need to get started with the NeoTrellis M4 in one kit. This pack bundles the NeoTrellis M4 Mainboard, an acrylic enclosure, silicone elastomer button pads, and rubber feet — ready to assemble into a complete MIDI controller, sound board, or interactive button-pad device. The NeoTr...
Adafruit NeoTrellis RGB Driver PCB for 4x4 Keypad
·
Upgrade your button-pad projects with full-colour NeoPixel backlighting. The NeoTrellis RGB Driver PCB is a 4×4 keypad controller with 16 NeoPixels and an onboard seesaw I2C chip that handles both button scanning and LED driving — all over plain I2C, no NeoPixel pin management required. The boar...
Adafruit Neo Trinkey - SAMD21 USB Key with 4 NeoPixels
·
The Adafruit Neo Trinkey is a tiny USB-A development board featuring an ATSAMD21 microcontroller and four RGB NeoPixel LEDs. Just plug it into any USB-A port on a computer or laptop and you've got a programmable, colourful key that can act as a status indicator, macro keypad, MIDI controller, or ...
Adafruit OPT4048 Tri-Stimulus XYZ Color and Lux Sensor
·
A modern take on the common RGB colour sensor — the OPT4048 provides true CIE XYZ tri-stimulus output so you can match readings directly to standard colour spaces. It also calculates colour temperature (based on CIE) and lux measurements up to 144 kLux, making it suitable for everything from dim ...
Adafruit OV5640 Camera Breakout - 120 Degree Lens
A high-quality 5 Megapixel camera breakout designed for hobby-level microcontrollers like the RP2040 and ESP32-S series. The OV5640 sensor with a 120-degree wide-angle lens connects via an 8-bit parallel data interface, making it compatible with chips that have enough pins, DMA, and RAM to captur...
Adafruit Parts Pal
·
The ultimate companion kit for anyone learning electronics. The Adafruit Parts Pal packs LEDs, resistors, capacitors, transistors, sensors, switches, and prototyping essentials into a handy storage box — everything you need to dive into breadboard projects right away. Pair it with an Arduino, Ra...
Adafruit PCA9546 4-Channel I2C Multiplexer
Need to use multiple I2C devices that share the same address? The PCA9546 4-Channel I2C Multiplexer lets you connect up to four same-address I2C devices to a single microcontroller by acting as a gatekeeper — write a single byte to select the active channel and all subsequent I2C traffic is route...
Adafruit PCA9546 4-Channel STEMMA QT / Qwiic I2C Multiplexer
Need to use multiple I2C devices that share the same address? The PCA9546 4-Channel STEMMA QT / Qwiic I2C Multiplexer lets you connect up to four same-address I2C devices with completely solderless wiring. Five JST SH connectors (1 input + 4 outputs) make it plug-and-play with any STEMMA QT or Qw...
Adafruit PCA9548 8-Channel STEMMA QT / Qwiic I2C Multiplexer
Need to use multiple I2C devices that share the same address? The PCA9548 8-Channel STEMMA QT / Qwiic I2C Multiplexer lets you connect up to eight same-address I2C devices with completely solderless wiring. Nine JST SH connectors (1 input + 8 outputs in two rows of four) make it plug-and-play wit...
Adafruit PCB Ruler v2 - 6 - Default
·
Keep a handy component reference at your fingertips with this gold-plated PCB ruler. Measuring approximately 25 × 152 mm (1″ × 6″) on standard-thickness FR4, it features the most common surface-mount component packages you'll encounter — QFN, TDFN, SOIC, SOP, J-Lead, and more — all shown at actua...
