All Products

SKU: AF-5644 · MPN: ADA5644

The Adafruit 12V Bias Voltage Boost Converter uses the TI TPS61040 to generate 12V DC from as little as 3V input. This compact breakout is ideal for generating the bias voltage needed by OLED displays, LED string backlights, and FLASH/EEPROM reprogramming — without requiring a separate 12V supply...

SKU: AF-2024 · MPN: 2024

The Adafruit Capacitive Touch Shield brings 12 channels of capacitive touch sensing to any Arduino using the MPR121 chip. Each sensor has a "figure 8" pad with holes designed for quick alligator clip connections — attach one end to the shield and the other to any conductive object like metal, fru...

SKU: AF-4520 · MPN: 4520

The Adafruit 1.3" 240×240 Wide Angle IPS TFT Display is a bare display module — the same screen used in the Adafruit CLUE and Mini PiTFT 1.3". It delivers 240×240 pixels of 16-bit full colour with 80° viewing angles in all directions, driven by the ST7789 controller. This is the display module o...

SKU: AF-4313 · MPN: 4313

The Adafruit 1.3" 240×240 Wide Angle TFT LCD Display Breakout with MicroSD is a compact, high-density IPS screen driven by the ST7789 controller. With 240×240 pixels at 260 PPI in full 16-bit colour, it delivers sharp, vibrant visuals with 80° viewing angles in all directions. The breakout commu...

SKU: AF-4506 · MPN: 4506

The Adafruit 1.3" Colour TFT Bonnet for Raspberry Pi combines a 240×240 IPS TFT display with a 5-way joystick and two pushbuttons on a single plug-and-play bonnet. The display is driven by the ST7789 controller over SPI, delivering vibrant 16-bit colour with wide viewing angles. A Qwiic/STEMMA Q...

SKU: AF-2088 · MPN: 2088

The Adafruit 1.44" Colour TFT LCD Display Breakout is a compact 128×128 pixel screen driven by the ST7735R controller over 4-wire SPI. Unlike older CSTN displays, this is a true TFT with full 16-bit colour and fast refresh rates, making it suitable for any microcontroller project. The breakout i...

SKU: AF-5393 · MPN: 5393

The Adafruit 1.47" 320×172 Round Rectangle Colour IPS TFT Display features a distinctive rounded-corner design at 250 PPI, driven by the ST7789 controller over SPI. The rounded corners are achieved by masking corner pixels — the display is addressed as a standard rectangle in RAM, so no special m...

SKU: AF-3089 · MPN: 3089

The Adafruit 14-Segment Alphanumeric LED FeatherWing adds a bright 4-digit alphanumeric display to any Feather board. The 0.56" 14-segment LEDs can display the full alphabet, numbers, and punctuation — readable from up to 7 metres away. An onboard HT16K33 matrix driver handles all the LED multip...

SKU: AF-1910 · MPN: 1910

The Adafruit 14-Segment LED Alphanumeric Backpack is a standalone I2C LED driver board that makes it easy to add a 4-character alphanumeric display to any project. Powered by the HT16K33 chip, it handles all LED multiplexing over I2C — just send commands and it lights up the right segments for yo...

SKU: AF-3787 · MPN: 3787

The Adafruit 1.54" TFT LCD is a compact, high-density display featuring a 240×240 pixel IPS panel driven by the ST7789 chipset. With 220 PPI and wide viewing angles up to 80° in any direction, this display delivers vibrant, full-colour visuals that look great from virtually any angle. This break...

SKU: AF-4196 · MPN: 4196

The Adafruit 1.54" Monochrome eInk Display brings electronic paper technology to your microcontroller projects. Featuring a 200×200 pixel black-and-white display, this breakout delivers high-contrast, daylight-readable visuals that persist even when power is completely disconnected — just like pr...

SKU: AF-4868 · MPN: 4868

The Adafruit 1.54" Tri-Colour eInk Display brings electronic paper technology to your microcontroller projects. Featuring a 200×200 pixel display with black, red, and white ink, this breakout delivers high-contrast, daylight-readable visuals that persist even when power is completely disconnected...

SKU: AF-3137 · MPN: 3137

The Adafruit 15×7 CharliePlex LED Matrix FeatherWing in Blue adds a bright, compact 105-LED grid to any Feather board. The onboard IS31FL3731 driver handles all the charlieplexing over I2C, with 8-bit (256-level) PWM dimming on every individual LED — no complex wiring needed. The driver chip inc...

SKU: AF-3136 · MPN: 3136

The Adafruit 15×7 CharliePlex LED Matrix FeatherWing in Green adds a bright, compact 105-LED grid to any Feather board. The onboard IS31FL3731 driver handles all the charlieplexing over I2C, with 8-bit (256-level) PWM dimming on every individual LED — no complex wiring needed. The driver chip in...

SKU: AF-3134 · MPN: 3134

The Adafruit 15×7 CharliePlex LED Matrix FeatherWing in Red adds a bright, compact 105-LED grid to any Feather board. The onboard IS31FL3731 driver handles all the charlieplexing over I2C, with 8-bit (256-level) PWM dimming on every individual LED — no complex wiring needed. The driver chip incl...

SKU: AF-3135 · MPN: 3135

The Adafruit 15×7 CharliePlex LED Matrix FeatherWing in Yellow adds a bright, compact 105-LED grid to any Feather board. The onboard IS31FL3731 driver handles all the charlieplexing over I2C, with 8-bit (256-level) PWM dimming on every individual LED — no complex wiring needed. The driver chip i...

SKU: AF-5206 · MPN: 5206

The Adafruit 1.69" Round Rectangle TFT is a compact IPS display featuring 280×240 pixels at 220 PPI with distinctive rounded corners — ideal for smartwatch-style interfaces and modern electronics projects. The ST7789 driver communicates over 4-wire SPI and works with any microcontroller or microc...

SKU: AF-815 · MPN: 815

The Adafruit 16-Channel PWM/Servo Driver uses the PCA9685 chip to provide 16 channels of 12-bit PWM output over I2C. With a built-in clock, the driver runs independently — no need to continuously send signals from your microcontroller. Ideal for controlling servos, LEDs, or any PWM-driven device....

SKU: AF-1411 · MPN: 1411

The Adafruit 16-Channel PWM/Servo Shield brings PCA9685-based servo and PWM control to any Arduino in a convenient shield format. Using only I2C (SCL and SDA), the shield provides 16 channels of 12-bit PWM output with a built-in clock — no continuous signal from your microcontroller needed. Up t...

SKU: AF-3416 · MPN: 3416

The Adafruit 16-Channel PWM/Servo Bonnet adds precision servo and PWM control to your Raspberry Pi. Using the PCA9685 I2C PWM controller, it drives up to 16 servos or PWM outputs simultaneously with 12-bit resolution — completely free-running with no Pi processing overhead. Up to 62 bonnets can ...