All Products
Showing 10001-10020 of 11440 products
SparkFun Qwiic SHIM for Raspberry Pi
The SparkFun Qwiic SHIM for Raspberry Pi is a small, easily removable breakout that easily adds a Qwiic connector to your Raspberry Pi. The SHIM design allows you to plug directly to the Pi's I2C bus with no soldering required and the thin PCB design allows for it to be sandwiched on your Pi GPIO...
SparkFun Qwiic Single Relay
Have you ever wanted to control something powerful or have you ever needed to turn on/off a high power device from your Arduino or another low powered microcontroller? The SparkFun Qwiic Single Relay provides you with the easiest to use relay yet. The Single Relay board can handle up to 5.5A at 2...
SparkFun Qwiic Speaker Amp
The SparkFun Qwiic Speaker Amp includes the Texas Instruments TPA2016D2 stereo, filter-free class-D audio power amplifier. What distinguishes this audio amplifier from others is that it features volume control (i.e. gain), Dynamic Range Compression (DRC), Automatic Gain Control (AGC), enable/disa...
SparkFun Qwiic Starter Kit for Raspberry Pi
The SparkFun Qwiic Starter Kit for Raspberry Pi provides everything you need to get started with I²C sensors on your Raspberry Pi using the Qwiic connect system. The kit includes the Qwiic pHAT v2.0, which adds four Qwiic connectors to your Pi's GPIO header, plus three sensor breakouts and connec...
SparkFun Qwiic / Stemma QT FeatherWing (Shield for Thing Plus)
·
The SparkFun Qwiic FeatherWing (Shield for Thing Plus) provides an easy-to-assemble way to add the STEMMA QT / Qwiic connect ecosystem to any development board with Feather/Thing Plus Footprint. It connects the I2C bus (GND, 3.3V, SDA, and SCL) on your Feather to four SparkFun Qwiic / Stemma QT c...
SparkFun Qwiic Thermocouple Amplifier - MCP9600 (PCC Connector)
The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junction) and one for the chip itself (the cold junction). As a result, the MCP9600 ...
SparkFun Qwiic Thermocouple Amplifier - MCP9600 (Screw Terminals)
The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junction) and one for the chip itself (the cold junction). As a result, the MCP9600 ...
SparkFun Qwiic ToF Imager - VL53L5CX
The SparkFun Qwiic ToF Imager is a state of the art, 64 pixel Time-of-Flight (ToF) 4 meter ranging sensor built around the VL53L5CX from ST. This chip integrates a SPAD array, physical infrared filters, and diffractive optical elements (DOE) to achieve the best ranging performance in various ambi...
SparkFun Qwiic Twist - RGB Rotary Encoder Breakout
The SparkFun Qwiic Twist is a digital RGB rotary encoder breakout with built-in I²C interface. It handles all interrupt management, switch debouncing, and LED PWM internally, presenting encoder position, button state, and RGB colour control over a simple I²C connection via Qwiic connectors. The ...
SparkFun Qwiic WiFi Shield - DA16200
Ultra. Low. Power. Arguably the best three words in the IoT world. SparkFun has teamed up with ARM and Dialog to provide you with this Qwiic WiFi Shield based around the DA16200 module. The DA16200 is a fully integrated WiFi module with a 40MHz crystal oscillator, 32.768KHz RTC clock, RF Lumped R...
SparkFun Raspberry Pi 4 Hardware Starter Kit - 4GB
The Raspberry Pi 4 Hardware Starter Kit provides a solid set of parts and instruction for working with the Raspberry Pi 4 in a more hardware-centric manner. While the Raspberry Pi isn't typically considered a go-to for hardware projects, its I/O pins hold a lot of benefits that you can use for a ...
SparkFun Real Time Clock Module
This is the SparkFun Real Time Clock (RTC) Module, this little breakout that uses the DS1307 to keep track of the current year, month, day as well as the current time. The module comes fully assembled and includes a small CR1225 Lithium coin cell battery that will run the RTC for a minimum of 9 y...
SparkFun Real Time Clock Module - RV-1805 (Qwiic)
Get with the times, already! This SparkFun Real Time Clock (RTC) Module is a Qwiic-enabled breakout board for the RV-1805 chipset. The RTC is ultra-low power (running at only about 22nA in its lowest power setting) so it can use a supercapacitor for backup power instead of a normal battery. ...
SparkFun Real Time Clock Module - RV-8803 (Qwiic)
The SparkFun RV-8803 Real Time Clock Module is a Qwiic-enabled breakout for the RV-8803 RTC, featuring a factory-calibrated temperature-compensated crystal for extremely precise timekeeping. It tracks hundredths of seconds, seconds, minutes, hours, date, month, year, and weekday, with multiple al...
SparkFun RedBoard Artemis
The SparkFun RedBoard Artemis brings the powerful Artemis module into a familiar Arduino Uno footprint. Built around the Ambiq Apollo3 processor, it runs at 48 MHz (with 96 MHz turbo mode), includes BLE 5.0, and draws less than 1 mA in sleep — making it capable of running TensorFlow Lite models f...
SparkFun RedBoard Artemis ATP
The RedBoard Artemis ATP is affectionately called 'All the Pins!' at SparkFun. The Artemis module has 48 GPIO and this board breaks out absolutely every one of them in a familiar Mega like form factor. What's with the silkscreen labels? They're all over the place. We decided to label the pins as ...
SparkFun RedBoard Artemis Nano
The SparkFun RedBoard Artemis Nano packs the powerful Artemis module into a minimal, 0.8 mm thick PCB with USB-C programming, on-board LiPo battery charging, and a Qwiic connector. It's a compact, modern replacement for the Arduino Uno or Nano with significantly more processing power, memory, and...
SparkFun RedBoard - Programmed with Arduino
At SparkFun we use many Arduinos and we’re always looking for the simplest, most stable one. Each board is a bit different and no one board has everything we want, so we decided to make our own version that combines all our favorite features. The SparkFun RedBoard combines the simplicity of the U...
SparkFun RedBoard Qwiic
The SparkFun RedBoard Qwiic is an Arduino-compatible development board in the UNO R3 form factor with a built-in Qwiic connector for solderless I2C hookup. It programs over USB Micro-B using the Arduino IDE — select "Arduino UNO" from the board menu and you're ready to go. Key improvements over ...
SparkFun RedBoard Turbo - SAMD21 Development Board
If you’re ready to step up your Arduino game from older 8-bit/16MHz microcontrollers, the SparkFun RedBoard Turbo is a formidable alternative. At its heart, the RedBoard Turbo uses the ATSAMD21G18, which is an ARM Cortex M0+, 32-bit microcontroller that can run at up to 48MHz. With an impressive ...
