All Products

SKU: SF-CAB-18081

This is a 6-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. The six male pins that terminate one side of the cable feature a 1.5mm pitch while the JST-ZHR JST provides a secure locking device to ensure connector-mating integrity even under adverse cond...

SKU: SF-CAB-18080

This is a 4-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. The four male pins that terminate one side of the cable feature a 1.5mm pitch while the JST-ZHR JST provides a secure locking device to ensure connector-mating integrity even under adverse con...

SKU: SF-CAB-18078

This is a handy cable for connecting a five pin GHR-05V type locking connector to breadboard friendly male pins. The five male pins that terminate one side of the cable feature a 1.25mm pitch while the GHR-05V JST is typically used in PDP, LCD, or small electronics equipment. Features: 28 AWG ...

SKU: SF-CAB-18079

This is a handy cable for connecting a six pin GHR-06V type locking connector to breadboard friendly male pins. The six male pins that terminate one side of the cable feature a 1.25mm pitch while the GHR-06V JST is typically used in PDP, LCD, or small electronics equipment.Features:28 AWGDocument...

SKU: AF-4375 · MPN: 4375

A simple I2C temperature sensor in a breadboard-friendly TO-220 package. The TC74A0 provides basic temperature readings with ±2°C accuracy — a straightforward choice when you need easy temperature logging or monitoring without fussing over complex wiring. Works with both 3.3 V and 5 V logic, mak...

SKU: AF-5422 · MPN: 5422

It can be tricky to work out which pin is which when the Raspberry Pi Pico is attached to solderless breadboard. Luckily, the MonkMakes Breadboard for Pico solves this problem by labeling the Pico pins on the breadboard.This cute 3.2″ × 2.1″ (82 × 53mm) solderless half-size breadboard has four bu...

SKU: DF-FIT0908

This kit includes two kinds of mini multi-color block building breadboards and 2 base plates of different sizes. Users can freely assemble these breadboards to make various projects combining with other microcontrollers like Arduino, Raspberry Pi, etc., or use them in circuit assembly and test in...

SKU: LB-LS7240-H

Introducing the perfect solution for prototyping - our Half-size Permanent Solder Breadboard PCB! With this board, you can easily transfer your circuit from a solderless breadboard to a more permanent solution without any hassle. Say goodbye to messy wiring and hello to a clean and organized...

SKU: LB-LS7240-F

Introducing the perfect solution for prototyping - our Full-size Permanent Solder Breadboard PCB! With this board, you can easily transfer your circuit from a solderless breadboard to a more permanent solution without any hassle. Say goodbye to messy wiring and hello to a clean and organized...

SKU: PL-351

A 400-point solderless breadboard for prototyping electronic circuits. Features 30 rows of tie points with four bus lines spanning the full length of the board, providing enough space for up to four 14-pin DIP ICs or three 16-pin DIP ICs. Rows and columns are clearly labelled for easy reference,...

SKU: LB-SPEAKER

This breadboard-compatible speaker is a Little Bird exclusive, pre-wired with jumper wires and standard header pins so it plugs directly into a solderless breadboard. It's a quick, no-solder way to add audio output to your Arduino, Raspberry Pi, or microcontroller projects. The lightweight 38 mm...

SKU: AF-3391 · MPN: 3391

This potentiometer is a two-in-one, good in a breadboard or with a panel. It's a log taper 10K ohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not so loose that it will shift on its own. We like this one because the legs are 0.2" apart with pin-points, so you can p...

SKU: AF-735 · MPN: 735

An 8-bit logic level shifter in a breadboard-friendly DIP package. The 74LVC245 converts between 3.3V and 5V logic levels, making it easy to interface modern 3.3V sensors and peripherals with 5V microcontrollers like Arduino. Even when powered at 1.8V, the chip safely accepts up to 5V signals on...

SKU: AF-723 · MPN: 723

The Adafruit Perma-Proto Mint Tin Size Breadboard PCB is shaped to fit perfectly inside a standard Altoids-style mint tin — ideal for compact, enclosed projects. It features 30 rows of 5-hole connected pads in a familiar breadboard layout, plus 80 additional wiring holes around the edges for gene...

SKU: AF-1831 · MPN: 1831

This potentiometer is a two-in-one, good in a breadboard or with a panel. It's a fairly standard linear taper 100K ohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not so loose that it will shift on its own. We like this one because the legs are 0.2" apart with pin-poi...

SKU: AF-562 · MPN: 562

This potentiometer is a two-in-one, good in a breadboard or with a panel. It's a fairly standard linear taper 10K ohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not so loose that it will shift on its own. We like this one because the legs are 0.2" apart with pin-poin...

SKU: SF-PRT-10811

This DC power jack/connector is just like the other one that we carry except that it’s terminated with breadboard-friendly pins instead of wide solder terminals. These are also compatible with our DC wall supplies and have a 5.5mm jack, with a 2.1mm center pole diameter.Documents:Dimensional Drawing

SKU: AF-443 · MPN: 443

For really big projects, give yourself some room to work in, with a massive 2250-point breadboard - equivalent in size to three full sized breadboards side by side.The breadboards are mounted onto a metal plate, and comes with 4 colored posts you can use with a bench-top supply. Four bumpers are...

SKU: SF-DEV-11235

The Arduino and Breadboard Holder is a sturdy plastic base plate that keeps your Arduino and breadboard neatly organised during prototyping. The board mounts with two included screws using the standard Arduino mounting holes, giving a solid and simple connection — no plastic clips required. Comp...

SKU: AF-64 · MPN: 64

This is a cute half size breadboard, good for small projects. It's 2.2" x 3.4" (5.5 cm x 8.5 cm) with a standard double-strip in the middle and two power rails on both sides. You can pull the power rails off easily to make the breadboard as thin as 1.4" (3.5cm) and stick it onto an Arduino protos...