All Products
Showing 41-60 of 100 products
SparkFun FTDI Starter Kit - 3.3V
The SparkFun 3.3V FTDI Starter Kit gives you just what you need to get started with FTDI FT232RL USB to serial IC. The pinout of the included board matches the FTDI cable standard to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for general serial applications. Th...
SparkFun FTDI Basic Breakout - 3.3V
The SparkFun FTDI Basic Breakout provides USB-to-serial conversion using the FTDI FT232RL IC, operating at 3.3V logic levels. Its 6-pin header matches the standard FTDI pinout, making it compatible with Arduino Pro, LilyPad, and other 3.3V boards that use the FTDI connector. The board brings out...
SparkFun Beefy 3 - FTDI Basic Breakout
The SparkFun Beefy 3 is an FTDI Basic Breakout board based on the FT231X USB-to-serial IC. Unlike standard FTDI breakouts, it features an AP2112K voltage regulator capable of supplying up to 600mA at 3.3V — enough to power a 3.3V project directly from the board's USB connection. The 6-pin header...
FTDI Cable 5V VCC-3.3V I/O
The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The VCC pins of this FTDI cable are configured to operate at 5V with 3.3V I/O. The FTDI cable is designed around an FT232RQ, which is housed in a USB A connector. The ...
SparkFun BlueSMiRF v2
·
This board creates a wireless Bluetooth® serial UART link, making it a handy replacement for short serial cables. Pair it, connect it, and pass serial data between TX/RX lines, with serial streams supported from 2400 to 921600 baud.BlueSMiRF v2 keeps the familiar 6-pin serial layout used by many ...
LilyPad Tri-Color LED
Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color. Very bright output. This is a common anode design - to turn on a channel you simply need to ground one of the R/G/B pins to illuminate that chann...
LilyPad Accelerometer ADXL335
The LilyPad Accelerometer is a three-axis accelerometer based on the Analog Devices ADXL335, designed for the LilyPad wearable e-textile system. It detects joint movement, inclination, and vibration, outputting 0–3 V analogue signals on the X, Y, and Z axes. The board features large sewable pads...
LilyPad Slide Switch
This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc. The swtiches on each board are rated for 4 volts at 300mA, but will work at 5 volts with a reduction in current. LilyPad is a wearable e-textile technology developed by Le...
LilyPad Rainbow LED (6 Colors)
This is the LilyPad Rainbow LED strip, with seven LilyPad LEDs that are still attached to one another, letting you snap LEDs apart at your leisure to sew into clothing or whatever else you can dream up.The LilyPad Rainbow LED features seven individual LEDs in six unique colors (Red, Blue, Green, ...
LilyPad LED (5pcs) - Red
A pack of five red LilyPad LEDs on a snap-apart strip. Each LED has large sew tabs for stitching into fabric with conductive thread, making them ideal for wearable electronics and e-textile projects. The ultra-thin 0.8 mm PCB lies flat against fabric. Key Features 5× Red LEDs – Snap-apart stri...
E-Textiles LED module 5pcs White
Light up your E-Textile projects with this set of 5 E-Textile Compatible LED modules. With a working voltage of 3V - 5V and a current of 40mA, these LEDs are perfect for adding a touch of brightness to your wearable electronics. Each module is compatible with the popular Lilypad platform, making ...
Little Bird Finch Board ATTiny85
The Little Bird Finch is our smallest programmable board for e-textiles. Australian made, and a great alternative to the Lilypad / Lilytiny, the Finch is designed to add flashy functionality to your e-textiles or cosplay project without taking up a lot of room. It has an ATtiny85 microcontroller ...
Arduino Fio
The Arduino Fio (Funnel I/O) is a compact, wireless-friendly development board based on the ATmega328P. Designed by Shigeru Kobayashi and inspired by the LilyPad, the Fio includes a built-in lithium polymer battery connector with USB charging circuit, and an XBee socket on the underside for wirel...
![FLORA - Wearable electronic platform: Arduino-compatible [v3]](/rails/active_storage/representations/redirect/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVGkCRKJJIghwdXIGOwBUSSIMYmxvYl9pZAY7AEY=--4d888a8c33ff40271e66dd3149cfddcb88d2ebb3/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVHsIOgtmb3JtYXQ6CXdlYnA6EnJlc2l6ZV90b19maXRbB2kCkAFpApABOgpzYXZlcnsHOgxxdWFsaXR5aVc6CnN0cmlwVEkiCHB1cgY7AFRJIg52YXJpYXRpb24GOwBG--f55be79df1f1b025f86d676a642df617e240cfbc/image_bde1af31-7ec1-41fd-8266-c6e52761638a.jpg)
FLORA - Wearable electronic platform: Arduino-compatible [v3]
·
FLORA is Adafruit's fully-featured wearable electronics platform. It's a round, sewable, Arduino-compatible microcontroller designed to empower amazing wearables projects.FLORA comes with Adafruit's support, tutorials and projects. Check out dozens of FLORA tutorials on the Adafruit Learnin...
SparkFun MOSFET Power Controller
MOSFETs are awesome. They’re like a switch that you flip electronically! This SparkFun MOSFET Power Controller makes it easy to switch a battery supply on and off using your favorite microcontroller. The board also has sewable pads so you can use it in e-textile projects that need more juice. Th...
USB Serial Light Adapter - Atmega8U2 (Arduino Compatible)
This is a new version of the FTDI breakout board features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno. The 8U2 firmware uses the standard USB COM drivers, and no external driver is needed. However, on some Windows systems installing the drive...
E-Textiles Rainbow 7 LEDs (6 colours)
The E-Textiles Rainbow LED strip contains seven LilyPad-style sewable LEDs in six colours, connected in a snap-apart strip. Break off individual LEDs as needed and sew them into clothing, accessories, or craft projects using conductive thread. Each LED board has its colour printed on the back fo...
LilyPad LED (5pcs) - Yellow
This is a simple pack of five Yellow LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by ...
Lilypad LED Purple (5pcs)
This LilyPad LED Micro is Discontinued Now, We recommend other LilyPad as a suitable replacement. Here is a simple, very bright purple LED LilyPad. Light up the night! LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFu...
Lilypad LED Pink (5pcs)
Here is a simple, very bright pink LED LilyPad. Light up the night! LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into cl...
