All Products
Showing 41-60 of 94 products
Cytron MOTION 2350 Pro RP2350 Robotics Controller
·
Built around Raspberry Pi’s RP2350 processor, this Cytron robotics controller is made for beginner and intermediate builders who want to create more advanced robots while spending less time on the supporting electronics.The board integrates a 4-channel brushed DC motor driver, servo outputs, GPIO...
Adafruit STEMMA Soil Sensor - I2C Capacitive Moisture Sensor
·
The Adafruit STEMMA Soil Sensor uses capacitive measurement to detect soil moisture — a more durable approach than resistive sensors that corrode over time. With a single probe and no exposed metal, it avoids oxidation issues and won't introduce DC currents into your plants. The ATSAMD10 microco...
Grove-T Connector (5pcs)
Description Grove-T is a T-shaped hub. Is this remind you the HUB unit ? They are basically the same thing, just in different shape.This is also used for GROVE port expanding. Notice: Grove-T is just a hardware expander, if you are looking for hardware and software(standard prot...
I2C to 8-Channel Solenoid Driver
·
This driver board makes it much easier to control multiple solenoids from a microcontroller over I2C. It uses an MCP23017 GPIO expander so you do not need to dedicate lots of pins just to switch a bank of clicky, inductive loads.Solenoid power connects through the centre terminal blocks, with eac...
Matrix Portal S3 for HUB75 RGB Matrices - u.FL
·
Make an internet-connected RGB matrix display without the usual wiring fuss. This board plugs straight into the back of a compatible HUB75 RGB matrix, giving you an easy way to build colourful signs, clocks, status panels and data dashboards with CircuitPython or Arduino.This version uses a u.FL ...
BITCAR - Autonomous Line Following Obstacle Avoiding Car for micro:bit
The BitCar is a micro:bit-powered robot car kit featuring autonomous line following, ultrasonic obstacle avoidance, and remote control capabilities. Built around a sturdy chassis with two metal gear motors, the car includes built-in modules for buzzer, line follower, and four addressable RGB LEDs...
RedBear Duo
The RedBear Duo is a thumb-sized IoT development board with built-in Wi-Fi, Bluetooth 4.1 (dual mode), and Particle cloud connectivity. Everything you need to prototype connected devices is on board — just add your idea. Powered by an STM32F205 ARM Cortex-M3 at 120 MHz with Broadcom BCM43438 wir...
mbed Shield
The mbed Shield is an application board designed for the mbed LPC1768 prototyping platform. It brings together CAN, Ethernet, USB, and four standard Grove connectors on a single board, making it easy to connect sensors, actuators, and communication interfaces to your mbed projects. With a standa...
Adafruit NeoTrellis RGB Driver PCB for 4x4 Keypad
·
Upgrade your button-pad projects with full-colour NeoPixel backlighting. The NeoTrellis RGB Driver PCB is a 4×4 keypad controller with 16 NeoPixels and an onboard seesaw I2C chip that handles both button scanning and LED driving — all over plain I2C, no NeoPixel pin management required. The boar...
JST PH 4-Pin Socket to Color Coded Cable - 200mm
·
This cable will let you turn a JST PH 3-pin cable socket into 4 individual tinned wires. These are great to match up with our JST 4-PH cables, for extending and connecting sensors or LEDs, and the wires are even color coded! Black for GND Red for V+ White for SDA Green for SCL Even though...
JST PH 4-Pin to Male Header Cable - I2C STEMMA Cable - 200mm
·
This 200 mm cable converts a JST PH 4-pin connector into four individual wires with 0.1″ (2.54 mm) male header pins on the end. It's designed for connecting STEMMA and Grove I²C boards to breadboards, socket headers, or any standard 0.1″ pitch connection. Key Features JST PH to Male Headers – ...
JST PH 4-Pin to Female Socket Cable - I2C STEMMA Cable - 200mm
·
This cable will let you turn a JST PH 4-pin cable port into 3 individual wires with high-quality 0.1" female sockets on the end. We're carrying these to match up with any of our boards with 'STEMMA' connectors on them such as the Hallowing or Trellis M4. Can also be used with any STEMMA bre...
Adafruit PyGamer for MakeCode Arcade, CircuitPython or Arduino
·
The Adafruit PyGamer is a pocket-sized, open-source gaming handheld built for DIY game development and retro emulation. Powered by the ATSAMD51 running at 120 MHz with 512 KB flash and 192 KB RAM, it features an analog thumbstick, six tactile buttons, a colour TFT display, and stereo audio — all ...
TensorFlow Lite for Microcontrollers Kit
·
Machine learning has come to the 'edge' - small microcontrollers that can run a very miniature version of TensorFlow Lite to do ML computations. But you don't need super complex hardware to start developing your own TensorFlow models! We've curated a simple kit to dip your toes into machine ...
Adafruit MONSTER M4SK - Two Eyes are Better Than One!
·
The Adafruit MONSTER M4SK is a dual-display development board designed for creating animated electronic eyes for costumes, props, and interactive projects. Powered by a 120 MHz ATSAMD51 Cortex M4 processor, it drives two 240×240 pixel IPS TFT displays with smooth, real-time 3D eyeball animations ...
NeoFlash Acrylic Light Board
Description NEOFLASH is a RGB LED panel with 192 RGB LED(24x8). When you program this Unit, please pay attention to the sequence of the Neopixels. From top left (Where PIR placed) to right, and top to bottom. Connect this unit with M5Core via GROVE PORTB Single-Bus. We put Magnet on the bac...
180° Infrared Refletive Unit (ITR9606)
The OP.180 is an infrared reflective limit switch unit built around the ITR9606 sensor, which pairs an infrared emitting diode with a silicon phototransistor in a 180° (straight-through) orientation. When an object passes between the emitter and receiver, the IR beam is broken, triggering a digit...
Vibration Motor Unit (N20)
DescriptionVibrator Motor is consist of an N20 Motor and a metal eccentric wheel. This N20 motor is has a 5V supply voltage. The output shaft has a rotational speed of 8800 RPM. Specifications can be seen below. With this product, you can implement a vibration function to your applicati...
M5GO/FIRE 600mAh Battery Base
Description M5GO BOTTOM is apparently the bottom part of M5GO which is a upgrade of basic bottoms, with a larger battery, LOGO-compatilble holes, MICPHONE, LED Bar , two more GROVE PORT，and more. M5GO BOTTOM is the same Bottom of M5GO Lite, M5GO IoT Kit and M5Fire...
PIR Motion Sensor (AS312)
Description PIR is used to measure infrared (IR) light radiating from objects in its field of view. PIR sensors are commonly called simply "PIR", or sometimes "PID", for "passive infrared detector". The term passive refers to the fact that PIR devices do not radiate energy for detection p...
