All Products
Showing 21-40 of 100 products
Raspberry Pi 5 PoE HAT (H) – 5V 5A, Isolated SMPS, 802.3af/at
·
Power your Raspberry Pi 5 or Compute Module 5 over Ethernet with this PoE HAT (H). Deliver both power and network connectivity through a single Ethernet cable—perfect for remote installations, clean setups, and locations without easy access to power outlets. The HAT features an isolated switched-...
Grow Base Kit by Pimoroni
A Raspberry Pi-powered plant monitoring system that tracks moisture levels across up to three pots, alerts you when plants need water, and can even automate watering with optional pumps. The kit centres around the Grow HAT Mini, a compact add-on board with a built-in LCD, buttons, buzzer, and lig...
PaPiRus 2.7 eInk Display HAT for Raspberry Pi from Pi Supply
·
The PaPiRus Screen HAT from Pi Supply is an ePaper / eInk screen HAT designed for the Raspberry Pi. Think of it as the older sibling of the PaPiRus Zero.ePaper / eInk is a display technology that mimics the appearance of ink on normal paper. Unlike conventional displays, ePaper reflects light – j...
Unicorn HAT
What's going to protect your beloved Raspberry Pi from an onslaught of rainbow-coloured fusion? That's right, it's Unicorn HAT. Sporting a matrix of 64 (8 x 8) RGB LEDs and powered directly from the Pi, this is the most compact pocket aurora available. Unicorn HAT provides a wash o...
Unicorn HAT
What's going to protect your beloved Raspberry Pi from an onslaught of rainbow-coloured fusion? That's right, it's Unicorn HAT. Sporting a matrix of 64 (8 x 8) RGB LEDs and powered directly from the Pi, this is the most compact pocket aurora available. Unicorn HAT provides a wash o...
Dual-channel RS485 Expansion Hat for Raspberry Pi 4B
A dual-channel RS485 expansion HAT for Raspberry Pi that provides electrically isolated RS485 communication with built-in protection against lightning, surges, and transient voltage spikes. Each channel uses an isolated transceiver for reliable, interference-resistant data transmission — ideal fo...
Raspberry Pi Zero 2 W with 64GB Noobs
Get started quickly with the Raspberry Pi Zero 2 W bundled with a pre-loaded 64GB microSD card. The card comes with NOOBS (New Out Of Box Software), so you can choose and install your preferred operating system on first boot — no separate computer required for setup. The Pi Zero 2 W packs a quad...
M2.5 Standoffs for Pi HATs - Black Plated - Pack of 2
Our standoffs are engineered specifically to keep your Pi HAT or pHAT snug and supported on your Pi while also keeping the two boards separated. They're the perfect companion for any Pi HAT/pHAT combo. Contents 2 x 10mm M2.5 F-F standoff 4 x 6mm screw Raspberry Pi and ...
Raspberry Pi Zero 2W To 3B Adapter with Zero 2WH
The Zero 2W to 3B Adapter is the perfect alternative solution for your Raspberry Pi 3 Model B/B+! This adapter features pogo pin connection, allowing it to easily attach to your Pi 3B/B+ and a headphone jack that is extended from USB. With 4-channel USB ports, compatible with USB 2.0/1.1 tran...
Raspberry Pi 400 Expansion
I/O Expansion board designed for Raspberry Pi 400 to expand its utilization via the two dedicated GPIO ports for Raspberry Pi HAT. It works as a GPIO extender by providing two sets of 2 x 20 pin headers for the connection with HATs or Breadboards. A connection can be done via the FRC IDC co...
HighPi Raspberry Pi 4 Model B Case
A versatile case for the Raspberry Pi 4 with tool-free assembly and generous internal space for HATs and add-on boards. The snap-action design allows rapid installation and removal of your Pi without any tools. Tall enough to accommodate popular HATs like PoE, HiFiBerry audio, Serial, and UPS bo...
MAX-M8Q GNSS HAT for Raspberry Pi – GPS, GLONASS, BeiDou & Galileo, 2.5 m Accuracy, u-blox M8
·
In short A satellite positioning board that plugs onto a Raspberry Pi and tells it where it is, to within about 2.5 metres. It tracks four satellite networks instead of just GPS, so it keeps working in places a basic GPS module gives up — under trees, between tall buildings, or in a moving vehicl...
8-Channel 915MHz LoRa Gateway Kit with GPS HAT for Raspberry Pi 4
·
This kit brings a RAK Wireless LoRa concentrator and GPS HAT together with the accessories needed to build a Raspberry Pi powered LoRa gateway. It is made for IoT projects where Wi-Fi range is not enough, or where mobile coverage is limited or unavailable.The HAT supports multi-channel, multi-nod...
IO Expansion HAT for Pi Zero/Zero W
The IO Expansion HAT adds digital, analogue, I2C, PWM, UART, and SPI ports to the Raspberry Pi Zero and Zero W. An on-board STM32F030 MCU provides 8-channel 12-bit ADC and PWM output, communicating with the Raspberry Pi via I2C for convenient analogue input reading and servo control. Digital por...
Skywriter HAT
The Skywriter HAT uses electrical near-field 3D sensing to detect hand gestures and track position in three dimensions above the board. Powered by the Microchip MGC3130 sensor on a 4-layer PCB, it provides full X, Y, and Z positional data along with gesture recognition for flicks and taps — all w...
Unicorn HAT Mini
The Unicorn HAT Mini is a compact 17×7 RGB LED matrix for Raspberry Pi, featuring 119 individually controllable LEDs and four tactile buttons. Simply pop it onto any 40-pin Raspberry Pi — no soldering required — and use the Python library to display animations, scrolling text, simple images, and ...
1872×1404, 10.3inch flexible E-Ink display HAT for Raspberry Pi
A large 10.3" flexible e-ink display HAT for Raspberry Pi, featuring 1872×1404 resolution (~227 DPI) with 2–16 greyscale levels. The flexible panel is thinner and lighter than standard e-Paper displays, and the IT8951 embedded controller enables fast full-page refreshes in under one second with s...
Pimoroni Inventor HAT Mini for Raspberry Pi
A versatile motor, servo, and audio driver HAT for Raspberry Pi. Bring your mechanical inventions, creations, and contraptions to life! Inventor HAT Mini helps transform a Raspberry Pi computer into a robot, prop, kinetic sculpture, creepy automaton, or any other exciting moving thing. Want...
2.13inch E-Paper HAT (G), 250x122, Red/Yellow/Black/White, SPI Interface
A 2.13″ four-colour e-paper display HAT from Waveshare that plugs directly onto a Raspberry Pi via the standard 40-pin GPIO header. The panel renders red, yellow, black, and white ink for vivid, attention-grabbing content — perfect for price tags, shelf labels, and low-power status displays. Unl...
Tall 2x20 Female GPIO Header (PTH, 0.1in)
·
This tall 2x20 female header is designed to extend the reach of boards using the standard 2x20 GPIO pin footprint, including Raspberry Pi, Google Coral and NVIDIA Jetson boards.It can also be soldered onto Pi HATs that do not already have headers fitted. Check that the HAT or board is only popula...
