All Products
Showing 21-40 of 100 products
Pycom Pysense - Sensor shield for WiPy, SiPy, and LoPy
The Pycom Pysense is a sensor-packed expansion shield that fits all Pycom multi-network modules — including the WiPy, SiPy, and LoPy. It gives you a head start on IoT projects by combining five sensors, a LiPo charger, micro-SD card slot, and USB serial access in one compact board. With ultra-lo...
micro: IoT - micro:bit IoT Expansion Board
The micro:IoT is a feature-packed IoT expansion board for the BBC micro:bit. It integrates Wi-Fi connectivity, an OLED display, motor drivers, servo outputs, and a range of I/O ports into a compact cloud-shaped PCB — everything needed to build IoT projects with minimal setup. Designed to work wi...
Sensor WiFi ELECFREAKS PlanetX
·
The Elecfreaks PlanetX WiFi Sensor adds wireless connectivity to your micro:bit projects via the ESP8266 module. Upload sensor data to IoT platforms, monitor readings remotely, and send commands back to your micro:bit — all over Wi-Fi. Connects to the Elecfreaks Nezha expansion board via the RJ1...
iot:bit for micro:bit
IOT:bit is an expansion board based on IoT for micro:bit. It uses ESP8266 as WIFI expansion board and serial port to communicate with micro:bit. It also has extended all available IO port of the micro:bit which is leaded by GVS and you can extent various 3V E-blocks as LED, photosensitive and ser...
Alchitry Pt V2 Artix-7 FPGA Development Board
·
This is a platinum-tier FPGA development board designed for high-speed performance in compact builds. Its low-profile backside has no components taller than 1.5mm, enabling the use of high-speed 1.5mm stack-height DF40 connectors for GTP-capable interfaces such as PCIe 2.0.At the centre is a Xili...
Pycom Pycase - Blue
Pycase is a small, transparent case developed specifically for a Pycom development board and expansion board combo. Holds the development board, expansion board, antenna, and there’s even room for a small battery. Pycase is compatible with WiPy, LoPy, SiPy, FiPy, or GPy. Note: the expansion bo...
ELECFREAKS micro:bit Smart Greenhouse Kit
·
The ELECFREAKS Smart Greenhouse Kit is a hands-on STEM kit that simulates smart agriculture using a micro:bit and IoT expansion board. Students plant seeds in the built-in growth groove, monitor conditions with integrated sensors, and program automated responses — learning about environmental sci...
Pycom Pycase - Clear
The Pycase is a compact, transparent enclosure designed specifically for Pycom development boards paired with an expansion board. It accommodates the development board, expansion board, antenna, and has room for a small battery. Compatibility Pycom WiPy Pycom LoPy Pycom SiPy Pycom FiPy Pycom GP...
Arduino Portenta H7 Lite Connected Development Board
·
##Introduction Portenta H7 Lite Connected is a high-performance MCU development board with integrated Wi-Fi and Bluetooth connectivity, and is a product in the Arduino Portenta H7 series. It uses the same STM32H7 MCU chip and Cortex-M7/Cortex-M4 core as Arduino Portenta H7, enabling complex multi...
Full-Function Evaluation Carrier Board for LattePanda Mu Compute Module
·
##Introduction This is a full-function evaluation carrier board which exposes all the pins of the LattePanda Mu compute module, providing an ideal platform for evaluating and developing each pin. With a wealth of onboard interfaces and expansion slots, it supports the connection of various periph...
Lite Carrier Board for LattePanda Mu Compute Module (USB 3.0, Ethernet, PCIe 3.0, M.2 M key, HDMI)
·
##Introduction This lite carrier board(Base Board) is specifically designed for the LattePanda Mu computer-on-modules. Together with the LattePanda Mu, this carrier board forms a comprehensive development platform, akin to a Single Board Computer (SBC). It incorporates the most frequently used in...
LattePanda Mu - A Micro x86 Compute Module (N100 CPU,8GB RAM,64GB eMMC)
·
##Introduction LattePanda Mu is a micro x86 compute module featuring Intel N100 quad-core processor, 8GB LPDDR5 memory and 64GB storage. LattePanda Mu exposes extensive pins, including 3 HDMI/DisplayPort, 8 USB 2.0, up to 4 USB 3.2, and up to 9 PCIe 3.0 lanes. These flexible ports and open-source...
PH2.0 3-Pin Male-to-Male Cable 10cm - 10 Pack
·
This 3-pin PH2.0 male-to-male cable pack provides compact, tidy connections for modular electronics builds. It is designed for use with Boson modules and the UNIHIKER development board, helping you connect sensors, peripherals and expansion modules without soldering.Each cable has keyed PH2.0 3-p...
Beetle ESP32 - C3 (RISC-V Core Development Board)
The Beetle ESP32-C3 is a coin-sized IoT development board based on the ESP32-C3 RISC-V 32-bit single-core processor. Measuring just 25 × 20.5 mm, it breaks out up to 13 GPIO pins and integrates lithium battery charging management on-board — connect a Li-ion battery directly without extra charging...
RedBear Duo
The RedBear Duo is a thumb-sized IoT development board with built-in Wi-Fi, Bluetooth 4.1 (dual mode), and Particle cloud connectivity. Everything you need to prototype connected devices is on board — just add your idea. Powered by an STM32F205 ARM Cortex-M3 at 120 MHz with Broadcom BCM43438 wir...
RS485 MODBUS-RTU Soil NPK Measure Sensor for for Efficient Agricultural (IP68, 5-30V)
·
##Introduction The Soil Sensor is designed to measure and monitor the nitrogen (N), phosphorus (P), and potassium (K) levels in soil, enabling the optimization of soil fertility and creating ideal conditions for plant growth. With a broad voltage power supply range of 5-30V and data output throug...
Multi Function Expansion Board for UNIHIKER K10 and micro:bit (Power and Motion)
·
##Introduction The Multi-function Expansion Board for UNIHIKER is an all-in-one solution designed to unlock the full potential of UNIHIKER K10 projects. It directly addresses common hurdles by integrating a powerful motor driver, a portable power supply system, and extensive I/O expansion onto a ...
Adafruit "My Little Hacker" ESP32-S2 Development Board
The Adafruit "My Little Hacker" is an ESP32-S2 development board designed for audio playback projects with Wi-Fi connectivity. It combines an ESP32-S2 module (Wi-Fi, 4 MB flash, 2 MB PSRAM) with a microSD card slot for storing audio files and an I2S amplifier that drives speakers up to 3 W — maki...
ELECFREAKS Classroom Smart Air Purifier Kit
The ELECFREAKS Classroom Smart Air Purifier Kit includes components such as the IOT: bit expansion board, motor fan, and dust sensor. These components can achieve rich functions and perfectly match with the micro: bit development board, allowing you to explore more interesting smart homemaker ...
SparkFun Edge Development Board - Apollo3 Blue
Edge computing is here! You've probably heard of this latest entry to the long lineage of tech buzzwords like "IoT," "LoRa," and "cloud" before it, but what is the edge and why does it matter? The cloud is impressively powerful but all-the-time connection requires power and connectivity that m...
