All Products
Showing 921-940 of 8855 products · 2586 unavailable products hidden
6x1 F-F 12 Cable for ShiftBrites and ShiftBars
A 300mm (12") six-conductor female-to-female cable designed for chaining ShiftBrite and ShiftBar LED modules. The cable wires are colour-coded to match the ShiftBrite pinout, with black for ground and red for power. Specifications Length: 300mm (12") Conductors: 6 Wire Gauge: 26 AWG stranded...
6xAA battery holder
A 6×AA battery holder with bare wire leads for creating 7.2V rechargeable battery packs (NiMH/NiCd) or 9V packs from alkaline cells. The holder features side-by-side cell placement and comes with 150mm red and black wires for easy connection. Specifications Cell Quantity: 6× AA Output Voltage...
6xAA Battery Holder(double layer)
A double-layer 6×AA battery holder with a stacked 3+3 cell arrangement for a more compact footprint. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells. Comes with 150mm (6") red and black wire leads. Specifications Cell Quantity: 6× AA (double layer...
6 x AA battery holder with 5.5mm/2.1mm plug
·
A 6×AA battery holder with a 5.5mm/2.1mm DC barrel plug, ready to power Arduino boards and other electronics with a standard DC jack. Use alkaline AAs for approximately 9V at 3000–4000mAh, or rechargeable NiMH cells for 7.2V at ~2000mAh. The 9V alkaline output is ideal for boards with a 5V volta...
6xAA Battery Holder with DC2.1 Power Jack
A 6×AA battery holder with a DC 2.1mm power jack that plugs directly into an Arduino's barrel jack input. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells. Features mounting holes for secure installation. Specifications Cell Quantity: 6× AA Output...
6xAA Battery Holder with DC connector
A simple 6-cell AA battery holder with a 125mm (5") cable terminated with a standard 5.5×2.1mm centre-positive barrel jack connector. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells, ready to plug directly into devices with a standard DC barrel jack ...
7.0 40-pin TFT Display - 800x480 without Touchscreen
·
This 7.0" TFT display packs 800×480 pixels with an LED backlight and 24-bit colour capability via its 40-pin connector (8 red, 8 green, 8 blue parallel pins). It's ideal for projects requiring a large display area for graphics, menus, or data visualisation. This is a raw pixel-dot-clock display ...
7.0 40-pin TFT Display - 800x480 with Touchscreen
·
This 7.0" TFT display packs 800×480 pixels with an LED backlight and a 4-wire resistive touchscreen overlay. With 24-bit colour capability via its 40-pin connector (8 red, 8 green, 8 blue parallel pins), it's ideal for projects requiring a large, interactive display area. This is a raw pixel-dot...
7 1024 x 600 IPS Display for LattePanda
This 7" IPS display is designed specifically for the LattePanda single board computer. Simply connect it via the MIPI FPC connector and power your LattePanda — no extra power cables required. The display border is insulated with black tape to prevent short circuits, making it safe to use even wit...
7'' 1024x600 Touch Display (eDP) for LattePanda Mu / LattePanda Sigma
This 7" IPS touch display connects to the LattePanda Mu and LattePanda Sigma via eDP (Embedded DisplayPort) interface, delivering excellent visual quality with 1024×600 resolution and full viewing angle support. The multi-touch panel features 6H surface hardness for scratch resistance and a fully...
715 Ohm SMD Resistor 1/10W 1% (RC0603FR-07715RL)
·
This is a 715 Ohms SMD resistor with 1/10W power rating and ±1% tolerance, suitable for compact electronics builds, repairs and prototyping.It uses a thick film composition and has two terminations for standard surface-mount assembly. The part is supplied as a single resistor.Features:Moisture Re...
72W DC-DC Converter 12V@6A
A waterproof DC-DC step-down/step-up converter that accepts 8–40V DC input and delivers a stable 12V output at up to 6A (72W). Ideal for powering embedded PCs, single-board computers, and robot electronics from a wide range of battery or power sources. Key Features Wide Input Range – 8–40V DC ...
7.3-inch E-Ink Display with Wood Frame – 800x480, Ultra-Long Standby
·
The Waveshare PhotoPainter (B) is a 7.3" full-colour e-paper display housed in an elegant solid wood frame. Using E Ink Spectra 6 (E6) technology with six primary colours and advanced dithering, it renders photos and digital content with vivid colour saturation and high contrast — all without the...
74HC595 8-bit Serial-Parallel IC
A 74HC595 8-bit serial-in, serial/parallel-out shift register IC in a through-hole DIP-16 package. This tri-state output shift register accepts serial data (SPI) and outputs 8 digital bits in parallel, making it ideal for expanding the number of outputs from a microcontroller. Key Features 8-B...
74HC595 Shift Register - 3 pack
·
A pack of three 74HC595 shift register ICs. These chips take a serial input (SPI) of one byte and output those 8 bits onto 8 digital output pins. Chain multiple chips together by connecting the serial output of one to the serial input of the next — three chips give you 24 digital outputs from jus...
74LS00 Quad 2-in NAND Gate IC
A 74LS00 quad 2-input NAND gate IC in a through-hole DIP-14 package. Contains four independent 2-input NAND gates, one of the most fundamental building blocks in digital logic design. Key Features Quad 2-Input NAND – Four independent NAND gates 74LS Series – Low-power Schottky TTL logic Thro...
74LS27 Triple 3-in NOR Gate IC
A 74LS27 triple 3-input NOR gate IC in a through-hole DIP-14 package. Contains three independent 3-input NOR gates for digital logic design and signal processing. Key Features Triple 3-Input NOR – Three independent NOR gates 74LS Series – Low-power Schottky TTL logic Through-Hole DIP-14 – Br...
74LS86 Quad 2-in EX-OR Gate IC
A 74LS86 quad 2-input exclusive-OR (XOR) gate IC in a through-hole DIP-14 package. Contains four independent 2-input XOR gates, essential for parity checking, arithmetic circuits, and data comparison. Key Features Quad 2-Input XOR – Four independent exclusive-OR gates 74LS Series – Low-power ...
74LVC245 - Breadboard Friendly 8-bit Logic Level Shifter
·
An 8-bit logic level shifter in a breadboard-friendly DIP package. The 74LVC245 converts between 3.3V and 5V logic levels, making it easy to interface modern 3.3V sensors and peripherals with 5V microcontrollers like Arduino. Even when powered at 1.8V, the chip safely accepts up to 5V signals on...
7.5" e-Paper Display (H) – 800x480, Red/Yellow/Black/White, SPI
·
This 7.5" e-paper display (H) features 800×480 resolution with a four-colour palette of red, yellow, black, and white. Using microcapsule electrophoretic technology, it delivers a paper-like viewing experience with natural light reflection, an ultra-wide >170° viewing angle, and zero power consum...
