All Products

SKU: PR-PIM335

A whole heap of LED pixels with individual brightness control, for scrolling messages, animations, and more - Scroll pHAT HD! Scroll pHAT HD packs 17x7 pixels (119 total) onto a single pHAT, and gives you full PWM brightness control over each pixel. Create beautiful animations and even anti-...

SKU: PR-PIM331

A whole heap of LED pixels with individual brightness control, for scrolling messages, animations, and more - Scroll pHAT HD!Scroll pHAT HD packs 17x7 pixels (119 total) onto a single pHAT, and gives you full PWM brightness control over each pixel. Create beautiful animations and even anti-a...

SKU: SF-ROB-16328

The SparkFun Auto pHAT is an all-in-one robotics add-on for the Raspberry Pi. It drives up to two DC motors (with optional encoder support) and four servo motors, all controlled over I2C — leaving your Pi's GPIO pins free for other uses. A Qwiic connector is included for easy expansion. The boar...

SKU: PR-PIM182

The Micro Dot pHAT is a retro-style LED matrix display board for Raspberry Pi, designed to drive up to six Lite-On LTP-305 LED matrices. Each 5×7 pixel matrix includes a decimal point, giving you an effective display area of 30×7 pixels across all six modules. Use between 1 and 6 matrices in you...

SKU: SF-DEV-15945

The SparkFun Qwiic pHAT V2.0 for Raspberry Pi provides you with the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem while still using that Raspberry Pi that you’ve come to know and love. The Qwiic pHAT connects the I2C bus (GND, 3.3V, SDA, and SCL) on your Raspberry Pi to an ...

SKU: PI-PIM498

The Unicorn HAT Mini is a compact 17×7 RGB LED matrix for Raspberry Pi, featuring 119 individually controllable LEDs and four tactile buttons. Simply pop it onto any 40-pin Raspberry Pi — no soldering required — and use the Python library to display animations, scrolling text, simple images, and ...

SKU: AF-6094 · MPN: ADA6094

COB LED Unicorn – A Miniature Magical LightThis glowing unicorn is crafted from COB (Chip-on-Board) LEDs, the same technology found in Edison-style LED bulbs, arranged in a whimsical design to create a bright, warm, and uniform glow. Each piece consists of dozens of micro LED diodes, bonded onto ...

SKU: AF-3413

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need. They come in both male and female, and use crafty little retaining nubbins to grip tightly into the holes on the PCB. Ab...

SKU: DF-SER0062

A high-torque brushless waterproof servo delivering up to 45 kg·cm of stall torque at 8.4V. The all-metal gear train and aluminium shell provide exceptional durability, while IP67-rated waterproofing — achieved through laminated circuit boards, waterproof gaskets, and breathable composite sealing...

SKU: AF-3848

An isolated Power over Ethernet (PoE) module that extracts power from the Ethernet cable's centre taps and outputs a regulated 5 V at up to 1.8 A. The built-in isolation transformer ensures there is no direct electrical connection between the Ethernet side and the 5 V output — important for safet...

SKU: AF-4862

The Adafruit CYBERDECK Bonnet is a GPIO extender for the Raspberry Pi 400 that lets you plug any Pi bonnet, mini-HAT, or pHAT into the back of the Pi 400 at an angled position. It duplicates every GPIO pin from input to output, so your add-on boards work without any pin limitations. In addition ...

SKU: PI-COM1105

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT. If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers might be just t...

SKU: KI-2746

When using through hole LEDs it can be hard to form the eyelets and then work out which leg is positive and negative. That's where these Sewable LED Holders come in! The 5mm LED holder boards, quickly and easily take any through hole 5mm LED and (after soldering in place) make them easy to use in...

SKU: DF-ROB0128

The Devastator is a tracked tank-style mobile robot platform built from high-strength aluminium alloy. This version 2 features upgraded metal DC gear motors for improved speed, torque, and durability compared to the original plastic-motor design, along with a load capacity of up to 3 kg. The mod...

SKU: DF-FIT0492-A

A high-torque 12V DC geared motor with a 100:1 metal gear reducer. Built with 100% copper coils and a metal gearbox for durability, this compact motor delivers up to 50 kg·cm of stall torque at 50 RPM — ideal for robotics, automation, and projects requiring strong, controlled rotation. Key Featu...

SKU: PL-1120

A 200:1 plastic gearmotor with a 90-degree output shaft, offering a compact and affordable solution for small robot designs. The low-current brushed DC motor is well-suited for use with common motor drivers, and the recommended operating voltage range is 3–12V. The gearbox is fully enclosed and ...

SKU: AF-5849 · MPN: ADA5849

Incredibly tiny 1111-size (1.1mm × 1.1mm) individually addressable RGB NeoPixel LEDs for creating ultra-compact or high-density smart LED designs. These are the same integrated LED technology used in NeoPixel strips and pixels, but at a fraction of the size — 20× smaller than standard 5050 NeoPix...

SKU: SF-COM-11913

A green inverter connector cable for use with the INV133 electroluminescent inverter, bridging the gap between your inverter and ELastoLite panels. The 4.5-inch cable has bare wire leads that can be ironed directly onto ELastoLite connect patches for a clean, secure connection. ELastoLite is a w...

SKU: PR-PIM357

The state-of-the-art BME680 breakout lets you measure temperature, pressure, humidity, and indoor air quality, and is Raspberry Pi and Arduino-compatible! Use this breakout to monitor every aspect of your indoor environment. Its gas resistance readings will react to changes in volatile organic...

SKU: DF-FIT0441

INTRODUCTION   This is a motor revolution: a new DC brushless motor with built-in motor driver. It can be conncected to Arduino directly without external motor driver. Whatsmore, the motor comes with directional control, PWM speed control and speed feedback output, which make this motor t...