All Products

SKU: AF-388

Infrared LEDs are used for remote controls (they're the little LED in the part you point at your TV) and 'night-vision' cameras, and these little blue guys are high powered ones! They are 940nm wavelength, which is what nearly all devices listen to. They're 20 degree beamwidth, and work great ...

SKU: AF-387

Infrared LEDs are used for remote controls (they're the little LED in the part you point at your TV) and 'night-vision' cameras, and these little blue guys are high powered ones! They are 940nm wavelength, which is what nearly all devices listen to. They're 20 degree beamwidth, and work gre...

SKU: SF-COM-10246

The FreeM is a wireless infrared controller and power supply for BlinkM smart LEDs, enabling completely standalone deployment without physical wiring. When paired with a CtrlM transmitter, it creates an invisible, low-power infrared link to control BlinkMs (or any I²C device) up to 14 metres away...

SKU: AF-647

Celebrate turning off TVs or making a TV-B-Gone! Adafruit offers a fun and exciting stickers to show your interest and achievements for electronics, science and engineering. We believe everyone should be able to be rewarded for learning a useful skill, a great sticker is just one of the man...

SKU: AF-157

IR sensor tuned to 38KHz, perfect for receiving commands from a TV remote control. Runs at 3V to 5V so it's great for any microcontroller.To use, connect pin 3 (all the way to the right) to 5V power, pin 2 (middle) to ground and listen on pin 1. It doesn't do any decoding of the signal, just pass...

SKU: RP-SC0054 · MPN: SC0054

The Raspberry Pi TV HAT is a DVB-T2 Digital TV receiver add on for the Raspberry Pi, compatible with the  Raspberry Pi 3 Model B+  or Raspberry Pi Zero W  (and older Raspberry Pi 2 & 3 models)The Raspberry Pi TV HAT allows you to receive digital terrestrial TV broadcast systems whi...

SKU: LB-OWL-IR

An infrared receiver module that can read signals from most standard IR remote controls. Useful for adding remote control functionality to Arduino and microcontroller projects. Pair with an IR transmitter module to build a universal remote control system. Key Features IR Signal Reception – Rea...

SKU: SF-COM-07835

A translucent silicone rubber button pad with 16 buttons in a 4×4 grid. Each button has a hole underneath that accepts a standard 3 mm or 5 mm LED, allowing you to backlight individual buttons with any colour — including RGB using tri-colour LEDs. The pad can be split into four separate 4-button...

SKU: SF-COM-07836

This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your choice with the ability to display simple color...

SKU: AF-5990 · MPN: ADA5990

The Adafruit Infrared IR Remote Transceiver combines a high-powered IR transmitter and a sensitive 38 kHz IR receiver on a single board. With two 940 nm IR LEDs (one vertical, one horizontal) driven by an onboard N-channel FET at 100–200 mA per LED, you get 10+ metres of transmit range alongside ...

SKU: AF-5970 · MPN: ADA5970

The Adafruit TSMP96000 "Code Learning" Infrared IR Receiver Breakout detects IR signals across a wide frequency range of 20–60 KHz, making it perfect for "code learning" applications where you need your device to work with any IR remote control — even when you don't know the carrier frequency. U...

SKU: AF-3365

Do you have a display, television, projector or some other older device that isn't compatible with your HDMI devices? Here's an adapter that will allow you to convert HDMI from your modern computer or game system to NTSC/PAL, for older screens and devices that might not have an HDMI input.Th...

SKU: SF-COM-12023

Gone are the days that you have to worry about silicone weather proofing splitting and breaking on you! These are sealed non-addressable 1 meter long RGB LED strips that come packed with 60 5060 LEDs per meter. Each of these LED strips need a 12V supply and are enclosed by a flexible silicon j...

SKU: AF-3337

Learning to invent is fast and fun with no code-typing or circuit-soldering to slow things down. The BlocklyProp Starter Kit has all the hardware required to fully learn the Parallax’s Blockly visual programming tool in an educational environment, providing a natural first look into the C prog...

SKU: DF-TEL0190 · MPN: TEL0190

RainbowLink V2 is a pocket-sized USB Type-C serial debugging workstation that combines four independent communication channels with useful field power outputs. It replaces multiple USB dongles for RS485, RS232 and TTL UART work, making it well suited to field engineering, IoT development and indu...

SKU: AF-3114

Have you always wanted to binge-watch Battlestar Galactica on a single-board computer? We have! And that's why we put together this Raspberry Pi Media Center kit for Raspberry Pi Model 3's! Based around the OSMC media center, this kit includes everything you need to get going on building ...

SKU: DF-DFR0330

This is a wonderful combo, 2.4GHz Mini Wireless QWERTY keyboard mouse, TouchPad combo, with USB interface adapter for Raspberry Pi, Cubieboard, Mini PC and others. The Ergonomically handheld design is easy to carry and operate. Build-in removable rechargable Li-ion battery that has longer standb...

SKU: DF-TEL0179 · MPN: TEL0179

Add LTE CAT1 connectivity to IoT projects and development boards with this Air780E communication module from DFRobot. It supports LTE-FDD B1/B3/B5/B8 and LTE-TDD B34/B38/B39/B40/B41 bands, making it suitable for deployments in China, India, Southeast Asia and other supported regions.The module pr...

SKU: EC-DPI32110W

ESP32-S2-WROVER and ESP32-S2-WROVER-I use ESP32-S2 chip. The ESP32-S2 chip is equipped with an Xtensa® 32-bit LX7 single-core processor with a working frequency of up to 240 MHz. The user can turn off the power of the CPU and use the low-power coprocessor to monitor the status change of the perip...

SKU: ME-EDCREATE

Build onto your Edison with the EdCreate 5-in1 expansion kit! Designed to work with Edison robots, EdCreate provides the bricks required to create 5 different projects. The EdBuild projects require progressive levels of coding capabilities, making them a perfect addition to the Edison programming...