All Products

SKU: AF-2781 · MPN: 2781

ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you! This is a 25 Pack of 470Ω Resistors. More specifically, they are carbon film, through-hole axial type, with 1/4 Watt max dissipation, 300V max voltage, 5% prec...

SKU: AF-3227 · MPN: 3227

Welcome to the Internet of Things with Google! Whether you are a device creator prototyping a new design for production, or a hobbyist looking for an introduction to the new Android Things API, you've come to the right place. It's time to get your Android enabled hardware working with Googl...

SKU: AF-4294 · MPN: 4294

ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you!This is a 25 Pack of 1.0KΩ Resistors. More specifically, they are carbon film, through-hole axial type, with 1/4 Watt max dissipation, 300V max voltage, 5% precision resistor...

SKU: AF-2783 · MPN: 2783

ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you! This is a 25 Pack of 4.7K Ω Resistors. More specifically, they are carbon film, through-hole axial type, with 1/4 Watt max dissipation, 300V max voltage, 5% pr...

SKU: AF-2784 · MPN: 2784

ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you! This is a 25 Pack of 10K Ω Resistors. More specifically, they are carbon film, through-hole axial type, with 1/4 Watt max dissipation, 300V max voltage, 5% pre...

SKU: AF-2680 · MPN: 2680

OK you've signed up for Adafruit.io and you're ready to build something cool and Internet-connected. All you need is this starter kit which will get you going with lots of parts that go very well with our service and are the most common sensors and actuators you may want. Sense light, motion, ...

SKU: AF-2782 · MPN: 2782

A pack of 25 through-hole 2.2 kΩ carbon film resistors. These standard axial-type resistors feature 0.4 mm leads that plug cleanly into solderless breadboards, making them perfect for prototyping, kits, and permanent installations on perfboard or PCBs. Specifications Resistance – 2.2 kΩ Toler...

SKU: AF-2787 · MPN: 2787

A pack of 25 through-hole 100 kΩ resistors — an essential component for voltage dividers, pull-up/pull-down circuits, and general electronics projects. The 0.4 mm lead diameter fits standard solderless breadboards perfectly. Specifications Resistance – 100 kΩ Tolerance – ±5% Power Rating – ¼...

SKU: TB-RR0564

A pack of 8 metal film resistors rated at 470Ω and 0.5W (½W). These through-hole axial resistors offer 1% tolerance for accurate circuit design, and are the same physical size as standard ¼W carbon film resistors, making them a drop-in upgrade for higher power handling. Specifications Resistan...

SKU: SF-COM-30156 · MPN: COM-30156

This is a basic 47 kOhms through-hole resistor for general electronics prototyping and repairs. It is rated for 1/4 Watt with a ±5% tolerance.The PTH leads make it easy to use with breadboards, perf boards and hand-soldered circuits. It is supplied as a single resistor, handy when you only need o...

SKU: SF-COM-14563

A pack of 25 green 5mm LEDs with built-in resistors, eliminating the need for external current-limiting resistors. Operating from 3.0V to 5V, these LEDs are ready to connect directly to your power source — no calculations or extra components required. Packaged in reusable ESD-safe bags to protec...

SKU: SF-COM-11853

1.0M Ohm, ¼th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards.We’ve opted for a new and more breadboard-friendly lead thickness (they’re a bit thicker than our last ones). Note: Sold as singles. But check below for multi-packs. Documents: Breadboard Lectu...

SKU: DF-SEN0709 · MPN: SEN0709

This industrial-grade ORP (Oxidation-Reduction Potential) sensor is built for reliable water quality monitoring in demanding environments. Its integrated probe and housing measure ORP from -1999 to 1999mV, with RS485 communication for connection into monitoring networks.The sensor supports the st...

SKU: SF-GPS-23288 · MPN: GPS-23288

Bring high-precision GNSS positioning to your project with the u-blox NEO-F9P engine and dual-band L1/L5 reception. L5 signals sit in the protected ARNS band, helping reduce RF interference and improve reliability in challenging environments such as dense city streets.The breakout provides five s...

SKU: SF-PRT-14491

A pack of 20 through-hole 10 kΩ resistors with thick leads designed for a snug fit in solderless breadboards. These are standard ¼ W, ±5% tolerance PTH resistors — ideal for pull-ups, pull-downs, current limiting, and general prototyping. Specifications Resistance – 10 kΩ Tolerance – ±5% Pow...

SKU: SF-COM-18434 · MPN: COM-18434

This through-hole resistor is a handy staple for breadboards, perfboards and general electronics prototyping. It is supplied as a single 18 kOhm metal film resistor with 1/4 watt power rating.The axial PTH format makes it easy to plug into standard solderless breadboards or solder into prototypin...

SKU: LB-LS0317-47

These are your run-of-the-mill 1/4 Watt  5-band resistors. Commonly used in breadboards and other prototyping applications, these 47 ohm resistors are great for general use. These thick-lead versions of the resistors fit snugly into a breadboard with very little movement, so you should have ...

SKU: SF-KIT-13053

Holy Wattage, Batman! This Power Resistor Kit comes with 5 each of 5 different 10 Watt resistor values including 1, 2, 4, 8, and 16 Ohms. These resistors are capable of dissipating large amounts of power without damaging themselves. This kit is perfect for testing projects that require large amou...

SKU: SF-COM-30222 · MPN: COM-30222

This compact resistor network packages eight individual 10k Ohm isolated resistors into one 16-pin 2506 surface-mount component. It is a handy way to save board space when a design needs several identical resistors close together.Each resistor element is rated for 63mW with a ±5% tolerance, makin...

SKU: SF-COM-11508

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 10K resistors make excellent pull-ups, pull-downs, and current limiters. We’ve opted for a new and more breadboard-friendly lead thickness (they’re a bit thicker than our last ones). These resistors...