All Products

SKU: AF-3928

The Adafruit CRICKIT for micro:bit is a robotics and electronics driver board designed for the BBC micro:bit. Plug your micro:bit into the 40-pin edge connector and start controlling motors, servos, solenoids, NeoPixels, capacitive touch sensors, and a speaker — all managed over I2C via the Adafr...

SKU: KI-5612

Take your robotics project to the next level with the (i2C) Kitronik 16 Servo Driver Board for the BBC micro:bit.Capable of controlling 16 servos which are powered directly from the board's power supply. The board can be powered either through the terminal blocks or the on-board header for radio ...

SKU: EC-DTS09534M

This motor/ servo shield is for Micro: bit, it provides a simple way to add motor driving capability to a micro: bit. The shield can drive 2 motors, 2 servos, and allow the motors to be driven with forward, reverse, stop control. It’s easy to add the motor to the shield, and there is an integrate...

SKU: EF-EF09083

The ElecFreaks EF90D is a compact 360-degree continuous rotation digital servo designed for use with the BBC micro:bit. It operates at 3V, making it well-suited for micro:bit-powered robotics and motorised projects. The included wheel and tyre let you get moving straight away. Key Features 360...

SKU: DF-DFR0548

Since the advent of micro:bit, its simple and practical way of programming is widely loved by makers, students and teachers. Its sample design, coupled with a wealth of pin resources, give it infinite possibilities. This expansion board not only leads to 9 micro:bit onboard GPIO interfaces, ...

SKU: EF-EF05043

The Nezha Breakout Board is a feature-packed expansion board for the micro:bit, designed with classroom use in mind. It integrates 4 servo drivers, 4 motor drivers, and 7 sensor ports — all using RJ11 connectors with foolproof anti-reversal design, so students can plug in confidently without dama...

SKU: DF-MBT0044-1 · MPN: MBT0044-1

This bundle adds motor, servo and sensor expansion to the UNIHIKER M10 single-board computer, using the included Type-C to HY2.0-4P communication cable to bridge the M10 to the expansion board.The board includes an integrated 18650 battery holder so your controller, motors and sensors can run fro...

SKU: EF-EF08299

ELECFREAKS Classroom Smart Pet Feeder Kit uses a micro:bit v2, an IOT:bit expansion board, a PIR sensor from the Octopus series as well as a Sonar:bit, a 180° 9g servo, and a cute little wooden house as components. The working principle of the smart pet feeder is as follows: firstly, the PIR sens...

SKU: EF-EF09082

EF92A is a kind of 180 deg analog servo. It is light and portable, a little bigger than 5 cent coin. It works at 3V voltage and can be used to make small robot modules, mechanical arm modules and intelligent car modules.ParametersProduct SKU: EF09082Operating Voltage: 3.0V-5.5VOutput Torque: 1.6K...

SKU: KI-5620

This board provides a simple way to add motor driving capability to a BBC micro:bit. It allows two motors to be driven with full forward, reverse & stop control. It has terminal blocks to connect four input devices and a regulated 3V supply is fed in to the 80 way connector to power the ins...

SKU: DF-MBT0012

The micro:IoT is a feature-packed IoT expansion board for the BBC micro:bit. It integrates Wi-Fi connectivity, an OLED display, motor drivers, servo outputs, and a range of I/O ports into a compact cloud-shaped PCB — everything needed to build IoT projects with minimal setup. Designed to work wi...

SKU: EF-EF09081

EF90D is a kind of 360 deg analog servo. It is light and portable, a little bigger than 5 cent coin. It works at 3V voltage and uses pulse width to adjust speed of the servo rotation, which also can be used to make small robot modules, mechanical arm modules and intelligent car modules. Parame...

SKU: KI-5698

A compact motor driver board for the BBC micro:bit that drives two DC motors or one stepper motor. The integrated edge connector lets the micro:bit slot in directly, with built-in protection against short circuits, overcurrent, and overheating. Power is supplied via terminal block or servo conne...

SKU: SF-ROB-16787

The Kitronik: MOVE mini MK 2 buggy kit for the BBC micro:bit is the latest version of the ever popular :MOVE mini that provides a fun introduction to robotics. The :MOVE mini is a 2 wheeled robot that is suitable for autonomous operation, remote control projects via a Bluetooth application or bei...

SKU: EF-EF08297

The Classroom Smart Home Kit includes components such as an IOT:bit expansion board, crash sensor, 180-degree servo, rainbow LED, noise sensor, light sensor, and OLED display. These components enable a wealth of functionality and work perfectly with the micro:bit board, allowing you to explore mo...

SKU: DF-SER0048

A 9g metal gear servo designed specifically for the DFRobot Maqueen Plus Mechanic robot platform. Features a metal servo connecting plate with four M3 threaded mounting holes for easy installation, and metal gears for reliable, long-lasting performance. Supports 0–180° PWM-controlled rotation. S...

SKU: KS-KS4028

Launched by Keyestudio, this smart home kit is based on the open-source hardware of Micro:bit and designed for those who dream of living a more comfortable life with the help of technologies. This smart home system, with Micro:bit as its control board, is equipped with a 1602 LCD, a DHT11 temper...

SKU: DF-DFR1216 · MPN: DFR1216

##Introduction The Multi-function Expansion Board for UNIHIKER is an all-in-one solution designed to unlock the full potential of UNIHIKER K10 projects. It directly addresses common hurdles by integrating a powerful motor driver, a portable power supply system, and extensive I/O expansion onto a ...

SKU: LB-MICRO-EXPLOR

Note: This is the new version of our Micro:Bit 24 Bit kit and has been updated for the new Micro:Bit V2! The Little Bird Micro:bit Explorer's Kit includes more than 24 tutorials that teach you both how to use the micro:bit with various sensors and electronics with real-world applications. Acces...

SKU: EF-EF08197

The ElecFreaks Smart Home Kit is a micro:bit project kit for building interactive smart home models. It includes sensors, actuators, and cardboard building materials to create miniature scenes — a windowsill, wardrobe, fish tank, and more — all programmable with MakeCode or MicroPython via the mi...