All Products

SKU: WS-20330

RP2040-LCD-0.96 is a low-cost, high-performance Pico-like MCU board with flexible digital interfaces. It incorporates Raspberry Pi's RP2040 microcontroller chip, as same as the one on Raspberry Pi Pico. For software development, either Raspberry Pi's C/C++ SDK, or the MicroPython is available...

SKU: EC-SEP0005K

The All-in-one Starter Kit for Pico 2 is a beginner-friendly learning platform built around the Raspberry Pi Pico 2 RP2350 chip. It integrates 17 sensor modules on a single circuit board with a 2.4-inch TFT full-colour touchscreen — no soldering or wiring required. Just plug in and start building...

SKU: RP-MAG71 · MPN: MAG71

Get Started with MicroPython on Raspberry Pi Pico (2nd Edition) is the official guide to programming the Raspberry Pi Pico using the beginner-friendly MicroPython language. Learn to write programs, connect electronic components, and build your own interactive projects from scratch. This fully up...

SKU: RP-PICO-HEADERS

The Raspberry Pi Pico is a compact, low-cost microcontroller development board built on the RP2040 — Raspberry Pi's own custom ARM silicon. This version comes with headers pre-soldered and a Micro-USB cable included, ready to use straight away. Powered by a dual-core ARM Cortex-M0+ processor run...

SKU: KI-5325

Take your first steps in Python and physical computing with the Kitronik Discovery Kit for Raspberry Pi Pico (Pico Included). The Kitronik Discovery Kit for Raspberry Pi Pico (Pico Included) is a great way to learn about microcontrollers, Python coding, and physical computing. The kit is suppl...

SKU: EF-EF01033

The Pico:ed is a development board built around the Raspberry Pi RP2040 microcontroller, featuring a 7×17 LED dot-matrix display and two programmable buttons on the front — making it perfect for interactive classroom projects. It uses the same edge connector as the BBC micro:bit, so it's compatib...

SKU: WS-19343

A dual GPIO expander board for the Raspberry Pi Pico that duplicates all GPIO pins into two sets of 2×20 male headers. Plug your Pico into the centre female socket, then connect two expansion modules simultaneously — doubling your prototyping capability without rewiring. Features clear pinout la...

SKU: SF-DEV-19958 · MPN: DEV-19958

This evaluation board combines the Raspberry Pi RP2040 microcontroller with a W5500 hardwired TCP/IP controller, giving you a Pico-style development platform with built-in Ethernet.The board works much like a Raspberry Pi Pico and keeps the same pinout, with the RP2040 GPIO broken out directly. G...

SKU: WS-19804

The 2.8" Touch Display Module is designed for the Raspberry Pi Pico, featuring a 320×240 IPS screen with 262K colours and a resistive touchscreen. It connects via the onboard female pin header for direct attachment to the Pico — no wiring required. Driven by the ST7789 display controller and XPT...

SKU: WS-20159

The Pico-Eval-Board is an overall evaluation solution designed for Raspberry Pi Pico. With 3.5inch 65K colorful LCD display and misc helpful onboard components, this evaluation board allows you to try almost every on chip peripheral of the RP2040, eliminating the mess wiring. It is an ideal choi...

SKU: DF-DFR0848

A Gravity-compatible expansion board for the Raspberry Pi Pico, breaking out all GPIO pins to labelled female headers and Gravity-standard 3-pin connectors. Provides plug-and-play access to 13 digital I/O, 3 analogue I/O, 2× I²C, 2× UART, and 2× SPI ports — no soldering required. Also includes a...

SKU: SF-LCD-29766 · MPN: LCD-29766

Add a bright 2.8-inch colour display to your Raspberry Pi Pico project with this Pimoroni display pack. It uses a 320×240 pixel IPS LCD driven by an ST7789V controller, giving you a generous active screen area for menus, status displays, dashboards and simple graphics.The board includes four tact...

SKU: WS-19653

This 0.96″ LCD Display Module is designed to plug directly onto a Raspberry Pi Pico via its onboard female pin header — no soldering or breadboard required. The 160×80 IPS panel delivers 65K RGB colours with wide viewing angles, driven by the ST7735S controller over SPI. Beyond the display, the ...

SKU: PR-PIM580

The Pico Display Pack 2.0 is a 2.0" IPS LCD add-on that attaches to the back of your Raspberry Pi Pico. With an 18-bit capable 320×240 pixel display, four tactile buttons, and an RGB LED, it turns your Pico into a compact user interface device for readouts, menus, notifications, or generative art...

SKU: WS-24004

Raspberry Pi Pico Entry-Level Sensor Kit Including 15 Common Modules Such As LED, Button, Buzzer, Etc.Out Of The Box As A Whole Kit, Or Can Be Separated To Use Independently Comes With Online Development Resources And Manual Features At A Glance Standard Raspberry Pi Pico header, supports Raspber...

SKU: AF-5160

Cytron's Maker Pi Pico Base incorporates the most wanted Reset button for your Raspberry Pi Pico and gives you access to all GPIO pins on two 20-pin headers, with clear labels. Each GPIO is paired with an LED indicator for convenient code testing and troubleshooting. The bottom of the board even ...

SKU: WS-19806

A compact 4-digit 8-segment red LED display module designed for the Raspberry Pi Pico. It plugs directly onto the Pico via an onboard female pin header and communicates over an SPI-compatible interface driven by an embedded 74HC595 shift register. The module comes with C/C++ and MicroPython demo ...

SKU: WS-19579

A 1.8" LCD display module designed for the Raspberry Pi Pico, featuring 160 × 128 resolution and 65K RGB colours. It plugs directly onto the Pico via an onboard female pin header — no soldering required. Driven by the ST7735S chip over SPI, this display uses minimal IO pins and comes with C/C++ ...

SKU: WS-19888

The Waveshare Pico-LCD-2 is a 2-inch IPS LCD display module designed to plug directly onto a Raspberry Pi Pico via its onboard female pin header. With 320×240 resolution and 65K RGB colours, it delivers clear, vibrant visuals for your Pico projects. The module uses an SPI interface requiring min...

SKU: SS-6000200319

Pico robot is a compact and cost-effective educational programmable 2WD smart car. It is based on Raspberry Pi Pico, and uses the MicroPython as programming language, combined with on-board sensors, many interesting functions are realized. This robot possess an infrared receiver and a Bluetoot...