All Products
Showing 1-20 of 51 products · 9 unavailable products hidden
Plastic Water Solenoid Valve - 12V - 1/2 Nominal
12V Solenoid Valve 1/2
Solenoid Valve-DN20
Solenoid Valve-DN15
DC 12V Four-Way Valve for Smart Plant Watering Kit 2.1
G3/4 12V PP Normally Closed Type Solenoid Valve Water Diverter Device
Brass Liquid Solenoid Valve - 12V - 1/2 NPS
Small push-pull solenoid
12V Solenoid Valve - 3/4
Large push-pull solenoid
Liquid Flow Meter - Plastic 1/2 NPS Threaded
Non-contact Capacitive Liquid Level Sensor
Gravity: Water Flow Sensor (1/2) For Arduino
Gravity: Arduino Digital Water Flow Sensor - 1/8
Small Lock-style Solenoid - 12VDC @ 350mAh with 2-pin JST
Arduino Automatic Smart Plant Watering Kit 2.1
Black Gladiator-Tracked Chassis
Electric Solenoid Lock
EcoDuino - An Auto Planting Kit
8-ch Ethernet Relay Module, Modbus RTU/Modbus TCP Protocol, PoE port Communication, With Various Isolation And Protection Circuits
Plastic Water Solenoid Valve - 12V - 1/2 Nominal
Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition to your robotic gardening project. There are two 1/2" (Nominal non-taped National Pipe) outlets. Normally, the valve is closed. When 12VDC is applied to the two terminals, the valve opens and w...
12V Solenoid Valve 1/2
This 12V normally closed solenoid valve controls water flow through a 1/2″ (DN15) inlet and outlet. It remains closed when unpowered and opens when 12V is applied — no polarity distinction is required. Pair it with a Gravity Water Flow Sensor (1/2″) for real-time flow monitoring in automated syst...
Solenoid Valve-DN20
A 12V DC motorised solenoid valve with a DN20 (20 mm) bore, designed for controlling water flow in automated projects. The valve integrates a DC motor with a metal reduction gearbox, providing high torque and low noise operation. It withstands up to 1.0 MPa static pressure. The valve has three c...
Solenoid Valve-DN15
A 12V DC motorised solenoid valve for controlling liquid flow in automated systems. Featuring a sealed metal reduction gearbox with high torque and low noise, this valve integrates both automatic and manual operation — it maintains its current state when powered off, allowing manual override. Th...
DC 12V Four-Way Valve for Smart Plant Watering Kit 2.1
A DC 12 V four-way solenoid valve with one inlet and four independently controlled outlets. Each outlet has its own control wire, so you can open any combination of the four channels — use one at a time or all four simultaneously. Designed for automated plant watering, aquarium systems, and other...
G3/4 12V PP Normally Closed Type Solenoid Valve Water Diverter Device
G3/4 12V PP Normally Closed Type Solenoid Valve Water Diverter DeviceThis is made of PP material and it is water proof, damp-proof, temperature resistance, insulation and good thermolysis.Specification:Material: PPVoltage: about 12V DCRated power: about 5WOperation model: normally closed (N/C)Pre...
Brass Liquid Solenoid Valve - 12V - 1/2 NPS
Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition to your robotic gardening, aquarium, or pool project. There are two 1/2" (Nominal NPS) outlets. Normally, the valve is closed. When 12VDC is applied to the two terminals, the valve opens and wa...
Small push-pull solenoid
A compact push-pull solenoid with a captive armature and built-in return spring. When energised with up to 12V DC, the armature moves in one direction; when power is removed, the spring returns it to its resting position. The dual-action design allows it to push from one end or pull from the othe...
12V Solenoid Valve - 3/4
This 12V DC solenoid valve controls water flow through a 3/4″ threaded inlet and outlet. It is normally closed — fluid is blocked until 12V is applied to the fast-on spade connectors on the solenoid coil. Connect it to a pressurised water source such as a garden hose or mains supply for automated...
Large push-pull solenoid
Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This makes the solenoid able to pull (from one end) or push (from the other)This solenoi...
Liquid Flow Meter - Plastic 1/2 NPS Threaded
An inline flow sensor for measuring liquid or water flow in solar heating, computer cooling, irrigation, and other fluid projects. The sensor uses a pinwheel with a magnet and an external hall effect sensor to count rotations through the plastic wall, keeping the electronics safe and dry. Each p...
Non-contact Capacitive Liquid Level Sensor
A non-contact capacitive liquid level sensor that detects whether liquid is present inside a non-metallic container or pipe without direct contact with the fluid. It works by measuring changes in capacitance through the container wall, making it suitable for corrosive liquids, strong acids, alkal...
Gravity: Water Flow Sensor (1/2) For Arduino
INTRODUCTION The Gravity Water Flow sensor measures the rate of a liquid flowing through it. The YF-S201 water flow sensor consists of a plastic valve body, flow rotor and hall effect sensor. It is usually used at the inlet end to detect the amount of flow. When liquid flows throug...
Gravity: Arduino Digital Water Flow Sensor - 1/8
The Water Flow sensor measures the rate of a liquid flowing through it. The YF-S401 water flow sensor consists of a plastic valve body, flow rotor and hall effect sensor. It is usually used at the inlet end to detect the amount of flow. When liquid flows through the sensor, a magnetic rotor w...
Small Lock-style Solenoid - 12VDC @ 350mAh with 2-pin JST
Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This makes the solenoid able to pull from one end.This solenoid in particular is nice an...
Arduino Automatic Smart Plant Watering Kit 2.1
The Arduino Automatic Smart Plant Watering Kit 2.1 is a complete system for monitoring and watering up to four plants automatically. Built around an integrated Arduino Leonardo mainboard, it uses capacitive soil moisture sensors to detect when each plant needs water and activates a pump and four-...
Black Gladiator-Tracked Chassis
If you are gonna build a robotics project, then you need to check out this guy, Black Gladiator. He is an agile tracked robot chassis, low noise, and easy to control, which could be a good partner for your any tank-liked robots. This tracked chassis employs high-strength aluminium alloy base with...
Electric Solenoid Lock
A 12V DC electric solenoid lock with a steel case and steel casting parts. Apply power to retract the latch and unlock; remove power and the latch springs back to the locked position. The lock includes signal feedback output so you can monitor its state from a microcontroller. Built with a pure ...
EcoDuino - An Auto Planting Kit
EcoDuino is evolving. Now the EcoDuino has an enclosure. It is protected from water splashes, so it is safe to use beside your plants. The Ecoduino now sports an Atmega32U4 which eliminates the requirement of an adapter. And sketches can simply uploaded via Mirco USB just like Arduino Leonad...
8-ch Ethernet Relay Module, Modbus RTU/Modbus TCP Protocol, PoE port Communication, With Various Isolation And Protection Circuits
An industrial-grade 8-channel relay module controlled via Ethernet, supporting Modbus RTU and Modbus TCP protocols. Features PoE power supply (IEEE 802.3af), optocoupler isolation, reverse-polarity protection, and a rail-mounted ABS enclosure for safe, easy installation. Supports multiple commun...
