All Products

SKU: WS-21708

A 5G cellular HAT for Raspberry Pi built around the SIM8202G-M2 module on Qualcomm's Snapdragon X55 platform. Supports 5G NSA and SA networking alongside 4G and 3G fallback, plus multi-constellation dual-band GNSS positioning. Connect via USB 3.1 to a Raspberry Pi, Jetson Nano, or PC for high-spe...

SKU: DF-DFR0566

An I/O expansion HAT for Raspberry Pi 4B and 3B+ that breaks out all GPIO pins into clearly labelled digital, analogue, PWM, I2C, UART, SPI, and I2S interfaces. The board is compatible with DFRobot Gravity series sensors and modules, allowing plug-and-play connections without complex wiring. The...

SKU: DF-DFR0604

The IO Expansion HAT adds digital, analogue, I2C, PWM, UART, and SPI ports to the Raspberry Pi Zero and Zero W. An on-board STM32F030 MCU provides 8-channel 12-bit ADC and PWM output, communicating with the Raspberry Pi via I2C for convenient analogue input reading and servo control. Digital por...

SKU: DF-TEM2022B-EN-1

An all-in-one IoT starter kit built around the FireBeetle 2 ESP32-E, designed by Hackster and DFRobot for learning IoT development with Arduino. The kit includes sensors, actuators, an audio player with speaker, and an I/O shield — everything needed to build connected projects right out of the bo...

SKU: DF-DFR0828

When making Raspberry Pi projects or learning to use Raspberry Pi for python programming, we may often need to check its Pinout Table to find out the BCM and WiringPi code corresponding to the related GPIOs, which is time-consuming and inefficient. Now in order to solve this problem, we designed ...

SKU: WS-22224

A sleek 1.47-inch IPS LCD display module with rounded corners, 172×320 resolution, and 262K RGB colours. The ST7789V3 driver communicates via a 4-wire SPI bus, minimising IO pin usage while delivering clear, colourful visuals. Supports both 3.3 V and 5 V operating voltage and comes with example ...

SKU: DF-TEM2022C-EN-1

The Hackster and DFRobot EEDU Environmental Sensor Kit provides everything you need to get started with IoT environmental monitoring using an ESP32-based FireBeetle board. Build practical projects that monitor soil moisture, air quality, and environmental conditions in real time. The kit centres...

SKU: WS-21705

A 5G cellular HAT for Raspberry Pi featuring the Quectel RM500U-CN module with quad antenna support. This board brings high-speed 5G, 4G LTE-A, and 3G connectivity to your Raspberry Pi, Jetson Nano, or PC — supporting both 5G NSA and SA networking modes. The HAT connects via USB 3.1 (USB 2.0 com...

SKU: WS-18014

POE HAT FOR RASPBERRY PI Power Over Ethernet HAT For Raspberry Pi 3B+/4B, 802.3af-Compliant(Any Backward-Compatible Future Versions Will Be Supported As Well) OLED for real-time monitoring temperature, IP, and fan status The PoE HAT (B) is a 802.3af-compliant Power Over Ethernet accessory...

SKU: WS-24691

A compact 1.27-inch RGB OLED display module featuring 128×96 resolution and 262K colours for clear, vibrant visuals. Built around the SSD1351 driver chip with an SPI interface, it requires minimal IO pins and is straightforward to integrate into your projects. Waveshare provides online developme...

SKU: AF-2718

The 7” Touchscreen Display for Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems and embedded projects! The 800x480 display connects via an adapter board which handles power and signal conversion. Only two connections to the Pi...

SKU: DF-TEM2022A-EN-1

We're excited to bring you three EEDU kits designed to make it easy for you to get started with AI, IoT, and environmental sensing using programming hardware. Each kit is built around an Arduino-compatible, ESP32-based FireBeetle board and comes with application-specific peripherals to help you g...

SKU: AF-5400

The Adafruit ESP32 Feather V2 is a major redesign of the original HUZZAH32 ESP32 Feather, featuring 8 MB flash, 2 MB PSRAM, USB-C, a STEMMA QT port, a NeoPixel, and a user button. The dual-core ESP32 at 240 MHz provides Wi-Fi and Bluetooth Classic/LE connectivity for wireless and IoT projects. D...

SKU: AF-3227

Welcome to the Internet of Things with Google! Whether you are a device creator prototyping a new design for production, or a hobbyist looking for an introduction to the new Android Things API, you've come to the right place. It's time to get your Android enabled hardware working with Googl...

SKU: RP-PICO-ELEC

If you're looking for a Raspberry Pi Pico Starter Kit, look no further!This is an awesome and affordable electronics kit for the Raspberry Pi Pico.The components of this Pico Electronics Kit enable you to create electronics circuits for light and sound.Pico Breadboarding can be hard, that's wh...

SKU: DF-DFR0067

This Gravity-compatible DHT11 sensor provides calibrated digital temperature and humidity readings via a single data pin. With an integrated 8-bit microcontroller and factory-calibrated coefficients stored in OTP memory, it delivers reliable measurements with minimal setup. The Gravity 3-pin int...

SKU: LB-LS3938

This terminal block breakout module comes fully assembled and soldered, ready for use with Raspberry Pi boards.It is compatible with Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, and Pi Zero W.The module features 2.54 mm (0.1″) pitch terminal blocks su...

SKU: RP-SC1927 · MPN: SC1927

The Raspberry Pi Compute Module 5 (CM5) Development Kit is your all-in-one solution for building powerful embedded systems. This kit includes the Compute Module 5, a CM5 IO board, a rugged metal case, a passive cooler for heat management, and a complete antenna kit for wireless connectivity.To ge...

SKU: AF-5967 · MPN: ADA5967

The Adafruit Proto Tripler PiCowbell gives your Raspberry Pi Pico or Pico W three side-by-side socket slots — plug in your Pico and up to two PiCowbell accessories with no soldering or stacking headers required. It also includes LiPo battery charging, a power switch, reset button, STEMMA QT conne...

SKU: AF-6403 · MPN: ADA6403

This compact breakout uses Melexis' MLX90632 FIR sensor to read the temperature of a target without making contact. It's handy for checking surfaces that are hot, cold, moving, delicate or awkward to reach with a probe, and it can also report its own local on-chip temperature.The fitted MLX90632S...