All Products

SKU: SF-BOB-12009

The SparkFun Bi-Directional Logic Level Converter safely translates signals between different voltage levels — stepping 5V down to 3.3V and 3.3V up to 5V on the same channel. It also works with 2.8V and 1.8V devices, making it a versatile bridge between mixed-voltage systems. Each board provides...

SKU: AF-757

This bi-directional logic level converter from Adafruit uses 4× BSS138 FETs with 10K pull-up resistors to safely shift signals between different voltage levels. Unlike many level shifters, this design is fully compatible with I2C's open-drain pull-up signalling, following NXP's recommended applic...

SKU: SF-PRT-14765

The SparkFun Single Supply Logic Level Converter is logic level and power supply translator in one small package. This little board breaks out the Texas Instruments TXB0104 4-bit bi-directional voltage-level translator with automatic direction sensing. With this logic level converter you wil...

SKU: LB-LR0185

Logic Level Converter Bi-Directional IIC 4 Way Level Conversion Module Description:If you’ve ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The SparkFun bi-directional logic level converter is a small device that safely steps down 5V signals to 3....

SKU: AF-1787

A quad level-shifting buffer IC that excels at converting 3V logic signals up to 5V. Power the 74AHCT125 with 5V and it will cleanly detect 3.3V logic inputs — particularly useful when connecting devices like Teensy 3.x to NeoPixels or other 5V peripherals. To use, apply 5V to VCC, connect GND, ...

SKU: AF-735

An 8-bit logic level shifter in a breadboard-friendly DIP package. The 74LVC245 converts between 3.3V and 5V logic levels, making it easy to interface modern 3.3V sensors and peripherals with 5V microcontrollers like Arduino. Even when powered at 1.8V, the chip safely accepts up to 5V signals on...

SKU: LB-LR0214-110A

Raspberry Pi 8 channel Level Switching (3.5V to 5V) IO Module Logic Level Converter is able to convert signals from 5V down to 3.3V (and vice versa) meaning you can safely use 5V or 3.3V devices with the Raspberry Pi (compatible). Because raspberries GPIO is 3.3 V, so regular 5 V sensor is not...

SKU: AF-1875

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V.Although one can use resistors to make a divider, for high speed tr...

SKU: DF-DFR0913

This DFRobot 4-channel optocoupler-isolated level converter translates 12V signals down to 3.3V, making it easy to interface industrial sensors and PLC outputs with Arduino, Raspberry Pi, and other 3.3V microcontrollers. Each channel features photoelectric isolation for reliable signal separation...

SKU: LB-00255

An 8-channel voltage level converter module for shifting between 3.3V and 5V logic levels. Designed for use with Raspberry Pi, making it easy to interface with 5V sensors and modules from the Pi's 3.3V GPIO pins. Key Features 8 Channels – Convert 8 signals simultaneously Wide Voltage Range – ...

SKU: SF-BOB-15439

The SparkFun PCA9306 Level Translator Breakout provides dual bidirectional voltage-level translation for I2C and SMBus lines. It lets you safely connect devices operating at different logic levels — for example, a 3.3V sensor to a 5V microcontroller — without a direction pin. Simply apply your re...

SKU: SF-PRT-28203 · MPN: PRT-28203

  The SparkFun Qwiic 5V Boost simplifies interfacing 5V I2C devices with the 3.3V Qwiic ecosystem. It takes the 3.3V I2C signals and power from its Qwiic connectors and boosts them to 5V, available on the PTH pins. This is perfect for powering peripherals like RGB LEDs or DC fans commonl...

SKU: DF-DFR0912

The 2-Channel Level Converter translates 12V signals down to 5V using optocoupler isolation, making it easy to interface industrial sensors and PLC signals with 5V microcontrollers like Arduino. It supports common anode, common cathode, and differential signal inputs with PNP output (NPN to PNP c...

SKU: DF-DFR0911

The 2-Channel Level Converter translates 12V signals down to 3.3V using optocoupler isolation, making it easy to interface industrial sensors and PLC signals with 3.3V microcontrollers like Arduino. It supports common anode, common cathode, and differential signal inputs with PNP output (NPN to P...

SKU: WS-25411

USB To UART/I2C/SPI/JTAG Converter, Supports Multiple Interfaces, Compatible with 3.3V and 5V, Multiple Protection Circuits, Multiple Systems Support, Aluminum Alloy Case, Wall-mount & Rail-mount Support USB TO UART/I2C/SPI/JTAG Supports multiple interfaces | Compatible ...

SKU: AF-3877

A hex Schmitt-trigger inverter IC that doubles as a handy logic level shifter. The 74AHCT14 provides six independent inverter channels, each with Schmitt-trigger inputs for clean switching on noisy or slow-transitioning signals. Spec'd for 5V operation but works at 3V as well. High-level inputs ...

SKU: DF-DFR0914

This DFRobot 4-channel optocoupler-isolated level converter translates 12V signals down to 5V, making it easy to interface industrial sensors and PLC outputs with Arduino and other 5V microcontrollers. Each channel features photoelectric isolation for reliable signal separation between high and l...

SKU: AF-3975

Drive up to 8 strands of NeoPixels simultaneously with DMA — no more blocking your code to push pixel data. The NeoPXL8 Friend is a standalone level-shifting breakout board that converts 3.3 V logic to 5 V for 8 independent NeoPixel outputs, with a breadboard-friendly form factor that works with ...

SKU: SF-DEV-15110

The SparkFun ESP32 Thing Plus DMX to LED Shield enables sending and receiving DMX data via an on-board XLR-3 jack or over ArtNet. Designed for developing custom DMX fixtures or adding ArtNet capabilities to existing setups, the shield includes electrical isolation between the controller and commu...

SKU: SF-DEV-09718

The FTDI Cable is a USB-to-Serial (TTL level) converter that provides a simple way to connect TTL interface devices to USB. Built around the FTDI FT232RQ chip housed in the USB-A connector, this cable operates at 5V logic levels. The cable terminates in a 0.1" pitch, 6-pin connector commonly use...