All Products

SKU: SF-PRT-14338

This isn’t your ordinary power supply. The Global Power Supply is a 15V, 4.34A power device specifically designed to work with the JustBoom Amp HAT for the Raspberry Pi. Additionally, as this is a “global” power supply, each order includes plug adapters for the United States, United Kingdom, E...

SKU: PI-IQA002

The IQaudIO Pi-DigiAMP+ is a HAT-compliant DAC and amplifier board for the Raspberry Pi, combining a high-quality 24-bit/192 kHz DAC with a 2×20W Class D stereo amplifier on a single board. Based on the Texas Instruments TAS5756m chipset, it delivers full-HD audio quality with no soldering requir...

SKU: DF-DFR0566

An I/O expansion HAT for Raspberry Pi 4B and 3B+ that breaks out all GPIO pins into clearly labelled digital, analogue, PWM, I2C, UART, SPI, and I2S interfaces. The board is compatible with DFRobot Gravity series sensors and modules, allowing plug-and-play connections without complex wiring. The...

SKU: PI-PPMB00130

The Amp:bit is the easiest way to connect a speaker or headphones to your BBC micro:bit. It plugs directly onto the edge connector and provides a 3.5mm headphone jack, solder pads for a speaker, and a volume control wheel — everything you need to add audio to your micro:bit projects. If you have...

SKU: SF-PRT-29327 · MPN: PRT-29327

Build a neater, sturdier Raspberry Pi stack with this hardware kit for mounting a standard Pi HAT. It is designed for Raspberry Pi 3, 4 and 5 boards, including builds where a larger cooling fan or heat sink needs extra clearance.The included tall 2x20 pin female GPIO header raises the HAT above t...

SKU: WS-25587

The Waveshare OLED/LCD HAT (A) combines a 2-inch IPS LCD main screen with dual 0.96-inch blue OLED secondary screens on a single Raspberry Pi HAT. It's ideal for displaying system stats, status indicators, and small graphics across three separate screens simultaneously. The main LCD provides a 2...

SKU: RP-SC2166 · MPN: SC2166

Powerful On-Device AI Acceleration for Raspberry Pi 5Take your Raspberry Pi projects to the next level with the Raspberry Pi AI HAT+ 2 — a compact, high-performance AI accelerator designed for real-time machine learning at the edge.Building on the success of the original AI HAT+, this next-genera...

SKU: DF-DFR0828

When making Raspberry Pi projects or learning to use Raspberry Pi for python programming, we may often need to check its Pinout Table to find out the BCM and WiringPi code corresponding to the related GPIOs, which is time-consuming and inefficient. Now in order to solve this problem, we designed ...

SKU: AF-2714

An extra-tall 2×20 SMT (surface-mount) female header designed for Raspberry Pi HATs. The increased height provides additional clearance for stacking multiple HATs or accommodating taller components on the Pi, such as displays and breakout boards. Compatible with all 40-pin Raspberry Pi models in...

SKU: PR-PIM482

The ultimate hackable headphone amp for your desk! Pirate Audio Headphone Amp for Raspberry Pi has an I2S DAC, headphone amplifier, high-res display, and playback control buttons.Build your own home-brew iPod Nano with Pirate Audio Headphone Amp! It's an all-in-one s...

SKU: AF-2217

The Adafruit Audio FX Sound Board with 2×2W Amp is a standalone audio trigger with a built-in stereo Class D amplifier — no Arduino or programming required. Simply drag and drop WAV or OGG sound files over USB, wire up buttons and speakers, and you're ready to go. With 16 MB of built-in flash, it...

SKU: AF-3289

The Pimoroni Automation HAT is a versatile home automation and industrial control board for the Raspberry Pi. With relays, analogue channels, powered outputs, and buffered inputs — all 24V tolerant — it provides a comprehensive I/O platform for monitoring and controlling real-world devices. Each...

SKU: SF-WRL-20115

This is a 915MHz SMA Duck Antenna for use with the AHPI7292S WiFi HaLow HAT. We've distinguished it as for use with this HAT as it's an SMA connection where most of our other boards are RP-SMA. It's the easiest way to start working with the WiFi HaLow HAT with meaningful transmission distance (wh...

SKU: AF-1064

This electret capsule microphone is the same one we use in our great microphone amplifier board. It contains a small vibrating element that will output a few milllivolts peak-to-peak. You will need an op-amp to amplify the signal, some chips are designed with the amplifier built in in which...

SKU: SF-WRL-19956

The ALFA Network AHPI7292S is the world's first WiFi HaLow (802.11ah) HAT for Raspberry Pi. Similar to LoRa, WiFi HaLow operates in the sub-gigahertz 915MHz band, providing long-range, low-power wireless communication with WiFi-style connectivity. It supports up to 15Mbps throughput in both stand...

SKU: DF-SEN0325

A 6+1 MEMS microphone array built around seven MSM261S4030H0 high-sensitivity digital silicon microphones. Designed for advanced audio applications including noise suppression, echo cancellation, reverb reduction, and sound source localisation. The array outputs raw digital audio over I2S, elimi...

SKU: AF-2187

A custom-made 2×20 short female header designed for surface-mount (SMT) Raspberry Pi HAT designs. This header provides the slimmest possible profile when you need a low-clearance connection between your HAT and a Raspberry Pi. While it requires SMT soldering skills (more challenging than standar...

SKU: DF-FIT0380

A 10W high-power warm white LED module with an integrated 60° focusing lens. The lens narrows the beam compared to the standard 120° version, concentrating the 500-lumen output into a tighter spot — ideal for searchlights, spotlights, and directional lighting. The module consists of nine separat...

SKU: SF-COM-27840 · MPN: COM-27840

The LM258P is an easy-to-use dual-channel operational amplifier for breadboard-friendly and through-hole electronics projects. It is suited to common op-amp circuits such as transducer amplifiers, DC gain blocks and general analogue signal conditioning.This IC gives you two individual op-amps in ...

SKU: AF-2210

The Adafruit Audio FX Sound Board with 2×2W Amp is a standalone audio trigger with a built-in stereo Class D amplifier — no Arduino or programming required. Simply drag and drop WAV or OGG sound files over USB, wire up buttons and speakers, and you're ready to go. With 2 MB of built-in flash, it ...