All Products

SKU: EF-EF03417

Joystick:bit V2 is a JoyStick based on micro:bit. It contains a 4-direction joystick and 4 undefined buttons as as classic JoyStick. At the same time, with the board buzzer and vibration motor, it also enhance game experience. Joystick:bit V2 can be remote control handle for micro:bit which on...

SKU: PI-PIM462

The Picade X HAT turns your Raspberry Pi into a retro arcade console by adding joystick and button inputs, a 3 W I2S DAC/amplifier for audio, and a safe power on/off system — all through a single HAT that powers your Pi via USB-C (no separate power supply needed). Female Dupont connectors make w...

SKU: LB-LS1025

The 2-Player DIY Arcade Joystick Kit includes everything you need to build your own retro arcade controls. With 20 LED arcade buttons, two joysticks (red and blue), two USB encoders, and all necessary cabling, this kit is ready to connect to a Raspberry Pi, PC, or Mac. The USB encoders present a...

SKU: AF-4506

The Adafruit 1.3" Colour TFT Bonnet for Raspberry Pi combines a 240×240 IPS TFT display with a 5-way joystick and two pushbuttons on a single plug-and-play bonnet. The display is driven by the ST7789 controller over SPI, delivering vibrant 16-bit colour with wide viewing angles. A Qwiic/STEMMA Q...

SKU: AF-3464

The Adafruit Joy Bonnet turns your Raspberry Pi Zero into a handheld gaming device. This fully assembled bonnet sits on top of any Pi Zero and provides arcade-style controls — a mini joystick and buttons — that act as keyboard inputs once you run the Adafruit installer script. No soldering requir...

SKU: SF-KIT-14051

The SparkFun Wireless Joystick Kit gives you a customisable wireless controller for XBee-based projects. Built around the SAMD21 microcontroller, it provides a flexible alternative to hobby RC transmitters — configure it your way at a fraction of the cost. The kit can be assembled in two configu...

SKU: DF-DFR0061

The Gravity Joystick Module V2 provides two-axis analogue control (X and Y) plus a digital push-button switch. Connect the two analogue outputs and one digital output to your Arduino or other microcontroller for intuitive directional input — ideal for robot control, menu navigation, and game proj...

SKU: AF-5753

Bring your classic PC joystick back to life. This adapter board takes any legacy DE-15 game port joystick and converts its analogue X/Y axes and two buttons to I2C via an onboard ATtiny816 running the Adafruit seesaw firmware. No analogue inputs needed on your microcontroller — just plug in a STE...

SKU: EC-ACS77312JS

Turn your Arduino into a simple game controller with this plug-and-play joystick shield. It features a two-axis thumb joystick with a select button plus four additional momentary push buttons — giving you retro game-pad style input for navigation, gaming, and menu control. The shield sits direct...

SKU: AF-802

The Adafruit 1.8" Colour TFT Shield is a plug-and-play display solution for Arduino, combining a bright 128×160 pixel TFT screen with a microSD card slot, 5-way joystick navigation switch, and three tactile buttons. This R3-format shield works with any Arduino or Metro board including the Metro M...

SKU: AF-3103

Sometimes a simple analog control device can be the perfect tactile solution for your project, but they can be surprisingly hard to come by. Luckily we've found a low cost, quality PSP 3000 2-Axis Analog Thumb Joystick to fulfill your directional analog input needs! This is a replacement ...

SKU: AF-512

A PSP/Xbox-style analog thumb joystick with a built-in press-to-select button, mounted on a breakout board designed for easy panel mounting. Unlike simple directional joysticks, this analog stick provides precise, proportional X and Y readings for accurate positional control. The breakout board ...

SKU: AF-3102

A compact analogue joystick with two 10kΩ potentiometers and a spring-return mechanism. Unlike arcade-style joysticks that use clicking switches, this joystick provides smooth, proportional analogue output across a full 50° range in both X and Y axes. Connect each potentiometer between ground and...

SKU: AF-480

A compact 8-way arcade joystick with a satisfying snap action, reminiscent of classic arcade cabinets. Unlike potentiometer-based analogue joysticks, this model uses four internal microswitches for crisp digital on/off directional input — perfect for retro gaming and menu navigation projects. Ke...

SKU: SF-COM-10063

This 5-way tactile switch provides joystick-like directional input in a tiny surface-mount package. It supports four directional movements (up, down, left, right) plus a centre press, making it ideal for menu navigation, cursor control, and compact user interfaces where a full-size joystick won't...

SKU: SF-COM-09182

This short-handle arcade joystick is a heavy-duty 4-way input in the classic Pac-Man style. Built from ABS plastic and solid alloy, it delivers a great feel with rugged construction that stands up to intense gameplay. Spring return centres the stick automatically after each movement. Key Feature...

SKU: AF-245

The 2-Axis Joystick provides analogue input for your projects using two independent 10K potentiometers — one per axis. It reports position as either voltage or resistance, making it compatible with a wide range of microcontrollers including Arduino and Raspberry Pi. The modular form factor plugs...

SKU: PI-COM-B003

If you want to be a smooth operator then analog input is essential! This mini operators' joystick uses two 10KΩ potentiometers and a spring-back system for the X and Y axes making it a great input device for many robotics projects Connect one side of each potentiometer to ground, ...

SKU: LB-LS1278

The  bluetooth controller is a compact, multi-purpose bluetooth remote that can allow you to play IOS/Android iCade games, wirelessly control music, use it as a wireless mouse on PC/MAC and remotely control your smartphone camera. Specification:Color: Black/White/RedSize: 116*45*14mmWei...

SKU: SF-COM-09426

A compact resistive analog joystick similar to those found on the PSP1000. Unlike traditional thumbstick joysticks, this one has a distinctive flat "slide" feel with a removable rubber thumb pad. Connect to an Arduino's analog inputs to read X and Y axis positions, with an expected range of appr...