All Products

SKU: AF-164

The Sharp GP2Y0A21YK0F is an infrared distance sensor that measures distances from 10 cm to 80 cm by bouncing IR light off objects. It outputs an analogue voltage proportional to distance — approximately 3 V at 10 cm and 0.4 V at 80 cm — which can be read directly by an Arduino or other microcont...

SKU: PL-136

The Sharp GP2Y0A21YK0F is an infrared distance sensor that outputs an analogue voltage corresponding to the distance of the nearest object within its 10–80 cm detection range. Using IR triangulation, it provides reliable distance measurements independent of the target object's colour or reflectiv...

SKU: DF-SEN0014

The Sharp distance sensors are a popular choice for many projects that require accurate distance measurements. This IR sensor is more economical than sonar rangefinders, yet it provides much better performance than other IR alternatives. Interfacing to most microcontrollers is straightforward: t...

SKU: SF-SEN-00242

The Sharp GP2Y0A21YK is an infrared proximity sensor with an analogue voltage output that varies with distance — from 3.1 V at 10 cm to 0.4 V at 80 cm. It uses an IR emitter and position-sensitive detector to measure distance, making it unaffected by the colour or reflectivity of most objects. T...

SKU: DF-KIT0071

The MiniQ Discovery Robot Kit is a 2WD mobile robot platform based on the MiniQ chassis and the Romeo V2 All-in-One Arduino-compatible controller. It comes with a Sharp GP2Y0A21 distance sensor and 9g micro servo pre-included, making it ready for obstacle avoidance and sensor-based navigation rig...

SKU: MR-CB-KT-DISTANCE-1

The Distance Cubelet detects how far it is from an object. It uses infrared light and is accurate between 10 and 80 cm. The sensor is directional, so outputs the distance to the object in front of the sensor. At 10cm, the block will output values near 1, and toward 80cm it will output value...

SKU: DF-ROB0021

The HCR Mobile Robot Kit is a two wheel drive mobile robot platform with three levels (if you want, you can use only the parts you need, or make a two level robot). The mobile robot kit contains two motors, two wheels, an omni-directional wheel, and hardware accessories such as metal plates...

SKU: DF-SEN0366

This is a cost-effective IR laser distance sensor that features high accuracy, long-distance detection, visible IR laser, and small FOV. It offers the measuring ranges 0.05~80m for indoor use and 0.05~50m outdoor. With serial port output, it is compatible with all kinds of controller boards like ...

SKU: LB-LR0062

This IR sensor can detect obstacles in front of it.  When an object is detected the green indicator light on the board will light up. There is a low-level output signal on the OUT port.It has a detection range of 2-30 cm at an angle up to 35 degrees.The detection distance can be changed by u...

SKU: DF-FIT0909

This is a “5-track, 4-wave line” digital storage oscilloscope for general-purpose electronic engineering tasks and it is based on the ARM Cortex M3 core. The oscilloscope uses FPGA to manage the external ADC’s control and data cache mode. It provides 4 application partitions for loading and ...

SKU: LB-LR0006

The infrared obstacle sensor is a compact IR proximity module designed for robotics and automation projects. It detects obstacles within a 2–40 cm range and outputs a TTL-level signal, making it easy to integrate with Arduino and other microcontrollers. The detection distance is adjustable via a...

SKU: DF-SEN0019

This is an Arduino infrared distance sensor. It has an adjustable detection range, 3cm - 80cm. It is small, easy to use, assemble, and inexpensive. Useful for robotics, interactive media, industrial assembly line, etc. Infrared wave length is part of the Sun's natural light spectrum. While is...

SKU: DF-SEN0158

Want a robot to hunt down heat objects or navigated with fire? This is a small form factor IR camera capable of tracking up to four heat/IR sources. The applications are plenty and can go from tracking of robots with IR transmitters for navigation to light barriers, determining the direction w...

SKU: DF-SEN0164

This adjustable infrared sensor features a high-sensitivity photoreflector to perform distance detection function,ranging from 3cm to 50cm. When the infrared light emitted by the emitter gets reflected on a surface that blocked it, the phototransistor can pick up the signal for distance calcul...

SKU: AF-4161

The Adafruit VCNL4040 is a two-in-one proximity and ambient light sensor from Vishay. It measures proximity from 0 to 200 mm (~7.5 inches) using an on-board IR LED, and ambient light from 0.0125 to 6,553 lux — all over a simple I2C interface. The breakout includes 3.3V and 5V level-shifting circ...

SKU: SF-SEN-16977

The TFMini-S Micro LiDAR Module is a ToF (Time of Flight) LiDAR sensor capable of measuring the distance to an object as close as 10 centimeters (+/- 6cm up to 6m) and as far as 12 meters (+/-1% starting at 6m)! As with all LiDAR sensors, your effective detection distance will vary depending on l...

SKU: AF-3595

The Adafruit APDS9960 is a multi-function sensor that combines proximity detection, ambient light sensing, RGB colour sensing and gesture recognition in a single I2C breakout. It uses an integrated IR LED and four directional photodiodes to detect reflected IR energy, enabling both distance measu...

SKU: AF-5396

The Adafruit VL53L4CD is a Time-of-Flight (ToF) distance sensor from ST that combines short-range and medium-range sensing in one chip. It measures from approximately 1 mm right up to 1300 mm, bridging the gap between the close-range VL6180X and the longer-range VL53L0X — all using an invisible l...

SKU: SF-SEN-15179

The TFMini Plus is a ToF (Time of Flight) LiDAR sensor capable of measuring the distance to an object as close as 10 centimeters (+/- 5cm up to 6m) and as far as 12 meters (+/-1% starting at 6m)! As with all LiDAR sensors, your effective detection distance will vary depending on lighting conditio...

SKU: PL-2739

The Pololu AltIMU-10 v5 is a compact inertial measurement unit (IMU) and altimeter that combines a gyroscope, accelerometer, magnetometer, and barometric pressure sensor on a single board. It provides ten independent measurements — pressure, 3-axis rotation, 3-axis acceleration, and 3-axis magnet...