All Products
Showing 1-20 of 23 products · 12 unavailable products hidden
iFixit Mako 64-Bit Precision Driver Kit
·
The Mako Driver Kit is a compact precision screwdriver set designed for electronics repair, small appliances and the awkward fasteners found in modern gadgets. It includes iFixit's 4 mm aluminium screwdriver handle with a magnetic bit socket, knurled grip and swivel top, plus a flexible extension...
13.56MHz RFID/NFC Sticker - NTAG203 Tag
·
This blank 13.56 MHz RFID/NFC sticker contains an NTAG203 chip with 144 bytes of writable EEPROM storage. The thin adhesive-backed form factor (4 × 2.5 cm) makes it easy to apply to equipment, packaging, shelves, or any smooth surface. The embedded chip and antenna are passively powered — no batt...
USB Battery Pack for Raspberry Pi - 10000mAh - 2 x 5V outputs
·
A large-sized rechargeable battery pack for your Raspberry Pi (or Arduino, or Propeller, or anything else that uses 5V!). This pack is intended for providing a lot of power to an GPS, cell phone, tablet, etc but we found it does a really good job of powering other miniature computers and mi...
PowerBoost 1000 Basic - 5V USB Boost @ 1000mA from 1.8V+
·
PowerBoost is the perfect power supply for your power-hungry portable project! This little DC/DC boost converter module can run from 1.8V batteries or higher, and convert that voltage to 5.2V DC for running your 5V projects. With a beefy 4A DC/DC converter, it can give you 1A+ from as low as 2...
Ethernet Controlled 8 Channel Relay 16A
The ETH008 is an 8-channel relay module controlled over Ethernet using TCP/IP commands or a built-in HTTP web interface. Each relay is rated up to 16A and features SPCO (Single Pole Change Over) contacts with normally open, normally closed, and common pins available on screw terminals. Individual...
USB Li-Ion Power Bank with 2 x 5V Outputs @ 2.1A - 5000mAh
·
Here's a hand-held-size rechargeable battery pack for your Raspberry Pi (or Metro, or anything else that uses 5V!). This pack is intended for providing a lot of power to a smartphone, tablet, etc, but we found it does a really good job of powering other miniature computers and micro-controller...
Multiple USB Card Reader , 4 IN 1 (Iphone, Micro, SD , Type C)
Unlock the versatility of your devices with the 4-in-1 iPhone Multiple USB Card Reader! This compact and efficient card reader is designed to seamlessly connect to your iPhone, Android, and USB-C devices, making it a must-have accessory for anyone on the go. Key Features: 4-in-1 Functionality:...
Bluetooth 4.0 RGB LED Strip Kit (Support iPhone Android)
The DFRobot Bluetooth 4.0 RGB LED Strip Kit combines a 3-metre WS2812 addressable LED strip with a Bluno (Arduino-compatible Bluetooth 4.0 board), sound sensor, and audio analyser. Control every individual LED from your iPhone or Android device via Bluetooth Low Energy — change colours in real ti...
Hamburger Mini Speaker
This will be a treat for your ears! The Hamburger Mini Speaker is a 3W economical speaker option for any project needing stand-alone sound. The Hamburger features a built-in lithium polymer battery for portable application, a 3.5mm stereo jack (sorry, iPhone 7 users) and two volume options (qu...
MicroUSB to 5.5/2.1mm DC Barrel Jack Adapter
·
The premise of this MicroUSB to 5.5/2.1mm DC Barrel Jack Adapter is simple. There's a MicroUSB plug on one end and a 5.5mm/2.1mm DC barrel jack with center positive polarity on the other. This allows you to connect one of our 5V 2 Amp, 5V 4A or 5V 10 Amp adapters ...
13.56MHz RFID/NFC Card - NTAG203 Chip
·
This blank 13.56 MHz RFID/NFC card contains an NTAG203 chip with 144 bytes of writable EEPROM storage. The standard credit-card-sized form factor makes it suitable for access badges, information sharing, and NFC prototyping. The embedded chip and antenna are passively powered — no battery is need...
13.56MHz RFID/NFC White Tag - NTAG203 Chip
·
This blank 13.56 MHz RFID/NFC white tag contains an NTAG203 chip with 144 bytes of writable EEPROM storage. The compact white disc form factor is commonly used for laundry tracking, garment identification, and general-purpose NFC tagging. The chip and antenna are passively powered — no battery is...
13.56MHz RFID/NFC Clear Tag - NTAG203 Chip
·
This blank 13.56 MHz RFID/NFC clear tag contains an NTAG203 chip with 144 bytes of writable EEPROM storage. The compact transparent disc form factor is commonly used for laundry tracking, asset identification, and general-purpose NFC tagging. The chip and antenna are passively powered — no batter...
USB-C to 3.5mm Audio Headphone Jack - iPhone Compatible
USB C to 3.5mm Audio Headphone Jack DAC AdapterOverviewThe USB C to 3.5mm Audio Headphone Jack DAC Adapter is your go-to solution for connecting traditional 3.5mm audio devices to modern USB-C devices without a headphone jack. Whether you're listening to music, taking calls, or using your favorit...
IPEVO VZ-X Wireless Document Camera
·
Three ways to connect — Wi-Fi, HDMI and USB — make the VZ-X the most adaptable visualiser IPEVO builds. Whatever the room already has, this camera will talk to it.Wireless when you want itConnect the VZ-X over Wi-Fi to a Mac, PC or Chromebook, to an iPad, iPhone or Android device, or to an Apple ...
USB A Jack to 5.5/2.1mm jack adapter
·
This little dongle will let you connect one of our 5V 2Amp or 5V 10Amp adapters to something that expects to connect to USB. The premise is simple - one end has a USB A female jack and the other has a 'standard' 5.5mm OD/2.1mm ID barrel jack with center positive polarity. It does not have any...
5V 1A (1000mA) USB port power supply - UL Listed
·
This 5V 1A USB power supply provides clean, regulated power for microcontrollers, development boards, and USB-charged devices. It accepts 110–240V AC input and outputs via a USB Type-A port, so you simply plug in whatever USB cable your project needs. The supply is intentionally designed to outp...
3-in-1 Waterproof USB Endoscope Inspection Camera
A waterproof USB endoscope camera with a 3-in-1 connector (USB, Micro USB, and USB-C) for use with computers, Android phones, Raspberry Pi, NVIDIA Jetson, LattePanda, and other single-board computers. The 8 mm lens diameter and 5-metre semi-rigid cable let you inspect narrow, dark, and hard-to-re...
Gravity: TCS3430 Tristimulus Color Sensor
Devices with True Tone technology like Apple iPad Pro, iPhone, and Macs usually feature sensors that measure the ambient light colour and brightness. The device then uses this information to automatically adjust its display, so it can correct white points and illumination based on your environmen...
USB C to 3.5mm Audio Headphone Jack - Android Version
USB C to 3.5mm Audio Headphone Jack DAC Adapter OverviewThe USB C to 3.5mm Audio Headphone Jack DAC Adapter is your go-to solution for connecting traditional 3.5mm audio devices to modern USB-C devices without a headphone jack. Whether you're listening to music, taking calls, or using your favori...