All Products

SKU: DF-DFR0063

This is an 16x2 LCD display screen with with I2C interface. It is able to display 16x2 characters on 2 lines, white characters on blue background. Usually, Arduino LCD display projects will run out of pin resourceseasily, especially with Arduino Uno. And it is also very complicated with the wi...

SKU: DF-DFR0556

A 16×2 character LCD display module from DFRobot's Gravity series, connecting to your Arduino or microcontroller via a simple I²C interface — just two data wires instead of the many parallel connections a standard LCD1602 requires. Compatible with both 3.3V and 5V, with no contrast adjustment nee...

SKU: DF-DFR0557

The Gravity I2C LCD1602 is a 16×2 character LCD display module from DFRobot's Gravity series, redesigned with a clean modern look and simplified I2C interface. It eliminates the need for contrast adjustment, retains backlight control, and is compatible with both 3.3 V and 5 V systems — making it ...

SKU: DF-DFR0464

A 16×2 character LCD module with full RGB backlight, communicating over I2C for minimal wiring. With support for 16 million backlight colours, this display adds a vibrant, customisable readout to your Arduino or compatible microcontroller projects using just four wires: VCC, GND, SDA, and SCL. P...

SKU: DF-DFR0555

The Gravity I2C LCD1602 is a 16×2 character LCD display module with a blue backlight and white text. It communicates over I2C, requiring only two data pins instead of the many parallel connections of a traditional LCD1602. The module is compatible with both 3.3V and 5V systems, and the contrast i...

SKU: DF-DFR0936

This shield with a 16×2 RGB LCD screen could bring you a brand-new experience with an LCD screen!The RGB LCD shield extends all IOs of Arduino UNO on the back, by which you can connect with modules like sensors, LEDs, and servos while using this screen to display content. More possibilities for y...

SKU: DF-DFR0554

The Gravity I2C 16×2 LCD features RGB font colours on a black background, allowing you to display text in any of 16 million colour combinations. Using the Gravity I2C interface, only two data lines are needed for both communication and backlight control. The display supports 2 rows of 16 charact...

SKU: AF-715

The Adafruit I²C Controlled + Keypad Shield Kit lets you drive a 16×2 character LCD and read 5 navigation buttons using only two I²C pins on your Arduino. This frees up the 9+ digital pins that a standard LCD connection would require, while still allowing other I²C devices to share the bus. The ...

SKU: AF-716

This Arduino shield kit combines a 16×2 RGB character LCD with five navigation buttons, all controlled over I2C using just two pins (Analog 4 and 5). An on-board I2C port expander handles the LCD, RGB backlight, and keypad inputs, leaving your remaining pins free for sensors and other peripherals...

SKU: TB-XC4454

This Arduino-compatible LCD shield combines a 16×2 character LCD display with a six-button keypad on a single board. The backlit display and built-in navigation buttons (up, down, left, right, select, and reset) make it easy to create user-friendly menus and interfaces for your Arduino projects. ...

SKU: WS-30499 · MPN: 30499

A compact 1.47-inch IPS LCD display module with an integrated capacitive touch panel. Featuring 172×320 resolution and 262K colours, it delivers crisp, vibrant visuals with wide viewing angles in an ultra-small form factor (22.05 × 41.69 mm). Built around the JD9853 display driver (SPI) and AXS5...

SKU: AF-714

This new Adafruit shield makes it easy to use a 16x2 Character LCD. We really like the RGB LCDs we stock in the shop both the RGB negative and RGB positive. Unfortunately, these LCDs do require quite a few digital pins, 6 to control the LCD and then another 3 to control the RGB backlight for a...

SKU: DF-DFR0374

The Arduino LCD Keypad Shield V2 includes a 2x16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8, 9 and 10 are used to interface with the LCD and Analog Pin 0 is used to read the work status of five pushbuttons. This product ensures consumer's convience especially when comp...

SKU: WS-31122 · MPN: 31122

A 1.9" IPS touch LCD display module with 172 × 320 resolution and 262K colours. It combines an ST7789V2 display driver with a CST816 capacitive touch controller, providing both vivid visuals and responsive touch input in a compact form factor. The module communicates via SPI (display) and I2C (t...

SKU: SF-LCD-13722 · MPN: LCD-13722

Add a tiny, crisp OLED to your next microcontroller project without taking up much space. This breakout carries a monochrome Blue-on-Black display that is only 64 pixels wide by 48 pixels tall, yet still has room for useful graphics, status screens and simple game interfaces.It is easy to drive f...

SKU: SF-LCD-16397

The SparkFun 16×2 SerLCD is a serial-enabled LCD that provides a simple, cost-effective way to add an RGB-on-black liquid crystal display to your project. An on-board ATmega328P microcontroller handles all screen control, eliminating the need for a separate backpack board. The display supports t...

SKU: WS-24155

A 1.28-inch round IPS LCD display module with an integrated capacitive touch panel. Featuring 240×240 resolution and 65K colours, the circular form factor is ideal for smartwatch-style interfaces, gauge displays, and interactive dashboards. Built around the GC9A01 display driver (SPI) and CST816...

SKU: AF-399

This is a fancy upgrade to standard 16x2 LCDs, instead of just having blue and white, or red and black, this LCD has full color RGB characters on a dark/black background! That means you can change the character display colors to anything you want - red, green, blue, pink, white, purple yellow,...

SKU: SF-LCD-10097

Calling this the “Serial Enabled LCD Kit” doesn’t do justice to how cool it actually is. After you’ve assembled this all-PTH kit, you’ll be left with a fully Arduino-compatible development board that just happens to have a white on black 16x2 display built-in. Turns out the ATMega328 is pret...

SKU: WS-25742

A 2.42″ monochrome OLED display module from Waveshare with 128 × 64 resolution, driven by the SSD1309 controller. It supports both 4-wire SPI and I2C interfaces with an onboard voltage translator, and Waveshare provides example code for Raspberry Pi, Pico, Arduino, STM32, ESP32, and Jetson Nano. ...