All Products

SKU: AF-2197

This flat HDMI 1.4 cable connects two full-size HDMI devices together in a slim, flexible form factor. At just 30 cm (1 foot) long, it's ideal for tight installations where a standard round cable would be too bulky. The thin, flexible design makes it a great match for Raspberry Pi display projec...

SKU: DF-FIT0692 · MPN: FIT0692

This 30 cm flat flex ribbon cable is made for connecting compatible GDI display modules to controller boards. It uses an 18-pin reverse FPC layout with a 0.5 mm pitch, helping keep display wiring neat in compact electronics builds.The flexible polyimide construction is designed to handle tight ro...

SKU: DF-FIT0855

This HDMI to RJ45 Ethernet Cable Extender consisting of a transmitter and a receiver is designed to synchronously transmit audio and video signals up to 30m with zero latency.The module supports HD 1080P video signal transmission.Gold plated HDMI interface, anti-oxidation, not easy to rust.No pow...

SKU: AF-3562

If you're looking to make a custom cable with any two of our HDMI adapters, then you'll need to have these flex cables handy! Making custom HDMI cables has never been easier. Just grab one of these cables, then swap and switch any of the HDMI adapters on each end using the flex cable...

SKU: WS-24864

A 9-inch QLED quantum dot display with 1280×720 resolution, 10-point capacitive touch, and toughened glass panel. The quantum dot technology delivers a wide colour gamut (100% sRGB, 92% NTSC) with 58% improved colour purity over standard displays, and a rated colour lifespan of up to 60,000 hours...

SKU: SF-CAB-21739

A 300mm (1 foot) SMA male to TNC male cable with injection-moulded stress-relief boots. Built with SYV-50-3 cable for an excellent balance of low signal loss and high flexibility — chosen over RG58 for superior performance at GNSS frequencies. Ideal for connecting RTK development boards to high-...

SKU: LB-LR0293-5

This HDMI-to-VGA adapter cable converts a digital HDMI signal to analogue VGA output, letting you connect HDMI devices like a Raspberry Pi, laptop, or media player to a VGA monitor, projector, or LCD screen. It features a built-in conversion chipset and requires no external power — it draws power...

SKU: DF-FIT0649

An 80 cm mini-HDMI to micro-HDMI cable supporting 4K resolution. This cable connects devices with mini-HDMI output (Type C) to devices with micro-HDMI input (Type D), or vice versa. Gold-plated connectors and 19-core shielding ensure reliable, stable signal transmission. Key Features 4K Suppor...

SKU: AF-6118 · MPN: ADA6118

HDMI & USB-C Panel Mount Extension Cable – A/V Integration Made EasyA must-have for A/V professionals, broadcast engineers, and custom enclosures, this HDMI and USB Type-C Panel Mount Extension Cable makes it simple to extend both power/data over USB-C and video over HDMI in your project.Key Feat...

SKU: DF-FIT0648

An 80 cm micro-HDMI to standard HDMI cable supporting 4K resolution, designed for the Raspberry Pi 4B and other devices with micro-HDMI output. Gold-plated connectors and 19-core shielding ensure reliable, stable signal transmission. Key Features 4K Support – High-definition video output up to...

SKU: DF-FIT0543

A 1.5 m Mini HDMI to standard HDMI cable for connecting devices with a Mini HDMI port to monitors, TVs, and projectors. Gold-plated connectors resist oxidation for reliable, long-lasting connections, and the shielded cable ensures stable signal transmission. Key Features Mini HDMI to HDMI – Ma...

SKU: DF-SEN0682 · MPN: SEN0682

This compact full-solid-state LiDAR module uses a 64×8 DTOF matrix to measure 512 points at once, giving robots and automation projects a wider view of what is directly ahead. It is designed for forward obstacle avoidance, local blind spot detection and other short-range 3D perception tasks.Direc...

SKU: EC-CMS01101D

A 10.1" IPS capacitive touchscreen with 1280 × 800 resolution and a distinctive RGB light strip on the back featuring 27 individually addressable LEDs with 19 animated lighting modes. Compatible with Raspberry Pi 3/3B+/4B, Jetson Nano, BeagleBone, Banana Pi, and other development boards, as well ...

SKU: AF-3548

A straight HDMI plug adapter for building custom HDMI cables. Pair it with an HDMI ribbon cable and snap on any combination of DIY HDMI adapters using the flex cable clips — mix and match plugs, sockets, and angles to suit your project. Tested with Raspberry Pi at 1080p. Ideal for tight enclosur...

SKU: PT-PT22018

This 1M cable allows you to connect your brand new Raspberry Pi 4 to your HDMI capable monitor or television. Featuring gold-plated connectors, copper conductors, aluminum foil and braid shielding, this high-speed HDMI to Micro HDMI male to male cable is built with enhanced durability and mini...

SKU: EC-RPA08067R

Yes, this is an adorable small HDMI television with incredibly high resolution! We tried to get the smallest possible HDMI display with high-res, high-contrast visibility. The display is very easy to use - simply connect the 12VDC adapter to the 2.1mm center-positive DC jack, then connect a di...

SKU: AF-3561

If you're looking to make a custom cable with any two of our HDMI adapters, then you'll need to have these flex cables handy! Making custom HDMI cables has never been easier. Just grab one of these cables, then swap and switch any of the HDMI adapters on each end using the flex cable...

SKU: AF-5087

A matching pair of 3-pin JST PH compatible cables with inline plug and socket connectors. Each cable is 20 cm long with stranded 26 AWG wires, providing a reliable and compact connection that can carry a couple of amps of current. The friction-lock connectors make it easy to connect and disconne...

SKU: LB-3-JST

A pack of ten 30 cm adapter cables, each with a 3-pin JST connector on one end and a standard female servo connector on the other. Ideal for connecting servos to receivers, controllers, or any device that uses a JST-style port instead of a standard servo header. Key Features JST to Female Serv...

SKU: AF-978

This panel mount extension cable will allow you to extend an HDMI connection and secure it to an enclosure. Perfect for placing your Raspberry Pi in a secure box. Two #4-40 screws are used to attach the female socket end, 26.9mm apart. Two hex-body standoff-screws are included as shown above and ...