All Products

SKU: LB-LS4167

This USB Male to USB Female + MicroUSB + USB-C Adapter is perfect for connecting your USB devices to your computer. It features a male USB connector on one end and a female USB connector on the other, as well as a MicroUSB connector and a USB-C connector. This adapter is compatible with most U...

SKU: AF-5956 · MPN: ADA5956

The Adafruit USB Host BFF adds a USB Host port to your QT Py or Xiao microcontroller, letting you connect keyboards, mice, USB drives, and other standard USB peripherals to your tiny project. It uses the MAX3421E USB Host chip, communicating over SPI with an IRQ pin. With driver support through ...

SKU: EC-DRA09012K

An accessory kit for the Raspberry Pi Zero and Zero W that provides adapters and headers to expand the board's compact connectors to full-size interfaces. Includes a clear acrylic case, USB OTG cable, Mini HDMI adapter, GPIO breakout cable, and a full set of header strips. Key Features USB OTG...

SKU: LB-LS5638

A 90-degree right-angle Micro USB male-to-female adapter that redirects your cable sideways, reducing strain on the connector and fitting neatly into tight spaces. The male end is right-angled while the female end is straight, providing a simple plug-in solution for awkward cable routing. Key Fe...

SKU: LB-1601026

This USB splitter cable expands a single USB 2.0 Type-A port into two, allowing you to connect multiple devices simultaneously for both charging and data transfer. It's a compact solution for adding extra USB connectivity to laptops, desktops, and in-car systems without needing a powered hub. Ke...

SKU: DF-TEL0002

A compact USB Bluetooth 2.0 adapter for adding wireless Bluetooth connectivity to your computer. Simply plug it into a USB port and connect to phones, headsets, keyboards, mice, and other Bluetooth devices. This adapter uses the native Windows Bluetooth stack, so no additional drivers or softwar...

SKU: WS-7965

A USB to TTL serial adapter cable with an embedded PL2303 converter chip. This 1-metre cable provides a simple way to add serial communication to your projects, connecting a standard USB-A port to 3.3V TTL-level UART signals via a 4-pin 2.54mm header. Ideal for accessing serial consoles on singl...

SKU: AF-3628

This adapter converts a USB-A male plug into a 5-pin screw terminal block, making it easy to connect bare wires to a USB port without soldering. Just loosen the terminal screws, insert your stranded or solid-core wire, and tighten. All five pins are clearly labelled (VCC, D−, D+, GND, and Shield/...

SKU: EC-RPA08821S

This speaker equipped with 360-degree sound field integrates a cone design with a custom-built speaker to project sound in all directions. It can offer deep and rich sound with HI-FI result for it comes with 1.4 subwoofers and the vacuum base. It is a new concept integrative portable mini speaker...

SKU: SF-TOL-19466 · MPN: TOL-19466

This USB wall adapter provides a compact mains power option for USB-powered devices, with an AC100-240V input range for use with suitable mains supplies.The adapter supports variable output ranges of 6V-6.5V/3A, 6.5V-9V/2A, and 9V-12V/1.5A. It is supplied with a USB to USB-C cable, helping it con...

SKU: AF-4970

I²CMini is an easy-to-use, open-source tool for controlling I²C devices over USB, 100% compatible with I²CDriver. Its a small friend that will make working with I2C a breeze, especially if they have a Qwiic/Stemma QT or even Grove I2C connector! USB to I²C interface in a tiny 18x18mm board Can a...

SKU: AF-2465

The PowerBoost 1000C is a DC/DC boost converter with a built-in LiPo battery charger and smart load-sharing circuit. It takes any 3.7V LiIon/LiPoly battery and boosts the output to 5.2V for powering 5V projects like Arduino, Raspberry Pi, or BeagleBone — even while the battery is charging. The l...

SKU: RP-SC0020 · MPN: SC0020

The Raspberry Pi Zero W is the wireless version of the ultra-compact Raspberry Pi Zero, adding built-in WiFi (802.11 b/g/n) and Bluetooth 4.1 (with BLE) via a BCM43143 chip. It retains the same tiny form factor and low price point as the Pi Zero v1.3, making it an excellent choice for IoT project...

SKU: DF-DFR0352

This standard sheild for WRTnode is directly stackable with the WRTnode Mini OpenWRT Dev Board. WRTnode (A Mini OpenWRT Dev Board) uses a MTK MT7620N 580MHZ MIPS CPU, and is powerful in both interface and functionality. But expanding its interface with jumper wires is troublesome si...

SKU: PH-TPH-018

The ZeroDock is an all-in-one desktop prototyping dock for your Raspberry Pi Zero. Little brother to ProtoDock, ZeroDock will keep your desk tidy and all of your Raspberry Pi Zero accessories in one place. No more searching for your micro-SD cards, SD adapters, HDMI adapters, USB shims, bread...

SKU: SF-TOL-08639

A USB-A to 5.5 × 2.1 mm barrel jack adapter cable for powering development boards and small devices from any USB port. Centre-positive polarity, delivering up to 5 V at 500 mA (per USB specification). Specifications Input – USB-A male plug Output – 5.5 × 2.1 mm barrel jack, centre positive V...

SKU: AF-2727

This adapter cable converts a 5.5mm/2.1mm DC barrel jack power supply to a Micro USB plug, allowing you to power Micro USB devices from a standard barrel jack power adapter. The barrel jack end is centre-positive polarity. It works great for powering Arduinos, BeagleBones, Raspberry Pis, Android...

SKU: AF-1667

This compact 7" IPS display delivers 1280×800 (720p) resolution with built-in 3W stereo speakers and multiple video inputs including HDMI, VGA, and composite (NTSC/PAL). Simply connect a 9–12V DC adapter and a video source for an instant mini monitor. The display features front-panel buttons for...

SKU: AF-2697

This USB to 2.1 mm barrel jack cable lets you power 5 V DC devices from any USB port. Simply connect the USB-A end to a computer, USB wall adapter, or USB battery pack, and the barrel jack end to your device. At 1 metre long with 22 AWG wires, it handles higher current draws reliably. The barrel...

SKU: AF-6323

The Adafruit USB Type C CC Resistor Fixer solves a common problem: USB-C devices that won't power or communicate when plugged into another USB-C port. Many devices are missing the two 5.1K CC (Configuration Channel) resistors required for proper USB C-to-C negotiation at 5V — this inline adapter ...