All Products

SKU: AF-4413

The Adafruit LSM303AGR combines a triple-axis accelerometer and triple-axis magnetometer in a single breakout board. The accelerometer measures gravity to determine which way is down, while the magnetometer senses magnetic north — combine the two for a complete compass and orientation solution. ...

SKU: PL-2510

Overview A Zumo robot preparing to attack a Parallax SumoBot. Zumo Robot for Arduino, v1.2. This Zumo robot is a low-profile tracked robot platform intended for use with an Arduino (or compatible device, such as an A-Star 32U4 Prime) as its main controller. It measures less than 10 ...

SKU: AF-1458

Sense the world around you! The FLORA Sensor Pack includes many types of sensors for your wearable enjoyment. Sense motion, direction, color, light levels, touch, and connections with FLORA sensor breakouts and conductive materials, and a few NeoPixels for experimenting with displaying your se...

SKU: DF-MBT0039

The BBC micro:bit V2 is a pocket-sized programmable computer designed to make learning to code fun and accessible. It builds on the hugely successful original with new onboard features including a speaker, MEMS microphone, and a touch-sensitive logo — all packed into a board just 5 × 4 cm. Progr...

SKU: PL-1265

This board has been replaced by the newer MinIMU-9 v2 L3GD20 and LSM303DLHC carrier, which offers improved magnetic sensing resolution, a wider acceleration measurement range, and gyro measurements that are more resistant to audio noise and vibrations. The new version is also 25% smaller than the...

SKU: DF-SEN0140

The DFRobot 10 DOF MEMS IMU Sensor combines four sensors on a single compact board — the ADXL345 accelerometer, ITG-3205 gyroscope, HMC5883L magnetometer, and BMP085 barometric pressure sensor. Together they provide 10 degrees of freedom for measuring acceleration, rotation, heading, and altitude...

SKU: EF-EF08179

The ElecFreaks Micro:bit Starter Kit is a comprehensive electronics learning kit designed for beginners exploring circuits and programming with the BBC micro:bit. It includes a micro:bit board along with a breadboard adapter, sensors, LEDs, motors, and other essential components. With 13 guided ...

SKU: DF-KIT0198-EU · MPN: KIT0198-EU

This GNSS-RTK kit is a complete base-and-rover positioning setup for projects that need centimetre-level location data. It uses Real-Time Kinematic correction, with a stationary base station sending RTCM correction data over an integrated LoRa 868MHz link to the mobile RTK unit.The system is buil...

SKU: LB-00191-20

A classroom-ready bulk pack of 20 BBC micro:bit v2.2 boards. Each micro:bit features a built-in speaker, microphone, touch sensor, accelerometer, compass, Bluetooth, and a 5×5 LED matrix — everything students need to start coding and creating interactive projects. Board-only packaging (no retail...

SKU: SF-SEN-30183 · MPN: SEN-30183

This compact digital compass module is built around the HMC6343, a fully integrated electronic compass designed to deliver reliable heading data without making your main microcontroller do all the processing.Unlike basic magnetometers that need to be kept flat, the HMC6343 combines 3-axis magneto...

SKU: WS-19358

A 10-DOF IMU sensor expansion board designed for the Raspberry Pi Pico. Combines a 9-axis ICM20948 motion sensor (gyroscope, accelerometer, magnetometer) with an LPS22HB barometric pressure sensor, all communicating over I2C. Plugs directly onto the Pico's pin header with a stackable design. Use...

SKU: DF-DFR0407

The Arduino 9 Axes Motion Shield is based on the Bosch BNO055 absolute orientation sensor — a System in Package (SiP) integrating a triaxial 14-bit accelerometer, 16-bit gyroscope (±2000°/s range), triaxial geomagnetic sensor, and a 32-bit microcontroller running BSX3.0 FusionLib software. The B...

SKU: PL-1268

The Pololu MinIMU-9 v2 is a compact (0.8″ × 0.5″) board that combines ST’s L3GD20 3-axis gyroscope and LSM303DLHC 3-axis accelerometer and 3-axis magnetometer to form an inertial measurement unit (IMU); we therefore recommend careful reading of the L3GD20 datasheet (2MB pdf) and the LSM303DLHC da...

SKU: PL-2739

The Pololu AltIMU-10 v5 is a compact inertial measurement unit (IMU) and altimeter that combines a gyroscope, accelerometer, magnetometer, and barometric pressure sensor on a single board. It provides ten independent measurements — pressure, 3-axis rotation, 3-axis acceleration, and 3-axis magnet...

SKU: DF-ROB0109

Sparki is a fully assembled, Arduino-compatible robot designed for learning programming, electronics, and robotics. Based on the Arduino Leonardo, it comes packed with sensors, motors, a display, and wireless connectivity — ready to use out of the box with no assembly required. Key Features Ar...

SKU: AF-659

FLORA is Adafruit's fully-featured wearable electronics platform. It's a round, sewable, Arduino-compatible microcontroller designed to empower amazing wearables projects.FLORA comes with Adafruit's support, tutorials and projects. Check out dozens of FLORA tutorials on the Adafruit Learnin...

SKU: LB-BULK-MICRO

A bulk pack of 300 BBC micro:bit V2.2 boards, ideal for schools, makerspaces, and institutions rolling out coding and STEM programmes at scale. Each micro:bit is individually packaged for easy distribution in classrooms and workshops. The micro:bit V2.2 features a built-in speaker, microphone, c...

SKU: SF-DD-27675 · MPN: DD-27675

This Thing Plus board is a wireless development platform built around the Raspberry Pi Foundation RP2350 microcontroller. It combines the familiar Thing Plus form factor with Qwiic expansion, a µSD card socket, USB-C, LiPo charging hardware and a fuel gauge for local or remote projects.The RP2350...

SKU: PL-2508

This shield makes it easy to build an Arduino-controlled Zumo robot. The shield mounts onto an assembled Zumo chassis, connecting directly to the chassis’s battery terminals and motors, and the Arduino plugs into the shield, face down. This shield includes dual motor drivers, a buzzer for pl...

SKU: DF-SEN0183

The CMPS11 is a 3rd-generation tilt-compensated magnetic compass module that combines a 3-axis magnetometer, 3-axis gyroscope, and 3-axis accelerometer. An onboard Kalman filter fuses gyro and accelerometer data to remove errors caused by tilting, delivering accurate heading readings regardless o...