All Products

SKU: DF-DFR0091

A 128 × 64 pixel graphic LCD module based on the ST7920 controller, featuring a blue backlight with white characters. Supports both parallel (8/4-bit) and SPI (3-wire serial) interfaces, with parallel mode set as the default. To switch to SPI mode, move the R9 resistor to the R10 position. The d...

SKU: PR-PIM094

This is the lovely little 16 x 3 character LCD we use on Display-O-Tron.A super-slim alternative to the classic industrial character displays. This model has a transparent display allowing you to add your own back-light if you wish! High-contrast LCD display 3 x 16 characters (3.6mm character hei...

SKU: AF-5409

PIXIE CHROMA is a dual-5x7 character display for Arduino that can be easily chained to create easy-to-use displays as long or tall as you'd like!Each PCB features 70 addressable WS2812-compatible RGB LEDs in two side-by-side 5x7 grids that can display numbers and characters. Each Pixie Chroma ca...

SKU: AF-499

This 20×4 character LCD features black text on a full-colour RGB backlight that you can set to any colour — red, green, blue, purple, teal, white, and everything in between. It's the most daylight-readable character LCD available and looks strikingly good at any colour or brightness level. A dro...

SKU: DF-DFR0515

The FireBeetle OSD Character Overlay Module adds on-screen character display to composite video (AV) signals. Based on the AT7456E OSD chip, it overlays up to 16×30 characters onto NTSC or PAL video feeds — ideal for adding timestamps, telemetry data, or status information to camera and monitorin...

SKU: AF-716

This Arduino shield kit combines a 16×2 RGB character LCD with five navigation buttons, all controlled over I2C using just two pins (Analog 4 and 5). An on-board I2C port expander handles the LCD, RGB backlight, and keypad inputs, leaving your remaining pins free for sensors and other peripherals...

SKU: AF-292

LCD backpacks reduce the number of pins needed to connect to an LCD. LCDs are a fun and easy way to have your microcontroller project talk back to you. Character LCDs are common, and easy to get, available in tons of colors and sizes. We've written tutorials on using character LCDs with an Ard...

SKU: PL-1219

This white-on-blue 20×4 character LCD adds a clear, easy-to-read display to your electronics projects. With four rows of 20 characters, it provides plenty of space for sensor readings, menus, status messages, and more. The display uses the industry-standard HD44780 parallel interface, making it ...

SKU: AF-1365

A simple acrylic stand that holds a 16×2 character LCD upright on your desk. Made from 3 mm black acrylic with nylon mounting hardware, it assembles quickly and gives your display a clean, professional look. Designed specifically for 16×2 USB/Serial backpack LCDs. Other 16×2 displays (OLED or RG...

SKU: AF-715

The Adafruit I²C Controlled + Keypad Shield Kit lets you drive a 16×2 character LCD and read 5 navigation buttons using only two I²C pins on your Arduino. This frees up the 9+ digital pins that a standard LCD connection would require, while still allowing other I²C devices to share the bus. The ...

SKU: SF-COM-11405

This 20mm 4-digit 7-segment display in red is a mid-size option — large enough to read from a distance but compact enough to fit in most enclosures. The common-cathode display features four 7-segment digits with one decimal point per digit. Key Features 4-Digit 7-Segment – With decimal point p...

SKU: SF-COM-11408

This 20mm 4-digit 7-segment display in blue is a mid-size option — large enough to read from a distance but compact enough to fit in most enclosures. The common-cathode display features four 7-segment digits with one decimal point per digit. Key Features 4-Digit 7-Segment – With decimal point ...

SKU: SF-COM-11409

This 20mm 4-digit 7-segment display in white is a mid-size option — large enough to read from a distance but compact enough to fit in most enclosures. The common-cathode display features four 7-segment digits with one decimal point per digit. Key Features 4-Digit 7-Segment – With decimal point...

SKU: AF-3089

The Adafruit 14-Segment Alphanumeric LED FeatherWing adds a bright 4-digit alphanumeric display to any Feather board. The 0.56" 14-segment LEDs can display the full alphabet, numbers, and punctuation — readable from up to 7 metres away. An onboard HT16K33 matrix driver handles all the LED multip...

SKU: DF-DFR0464

A 16×2 character LCD module with full RGB backlight, communicating over I2C for minimal wiring. With support for 16 million backlight colours, this display adds a vibrant, customisable readout to your Arduino or compatible microcontroller projects using just four wires: VCC, GND, SDA, and SCL. P...

SKU: AF-3128

The Adafruit 0.54" Quad Alphanumeric FeatherWing Display in blue adds a bright, 4-character 14-segment LED display to any Feather board. Each character can display letters, numbers, and symbols, making it ideal for clocks, status indicators, sensor readouts, and more. Driven by the HT16K33 I2C m...

SKU: AF-3127

The Adafruit 0.54" Quad Alphanumeric FeatherWing Display in white adds a bright, easy-to-read 4-character 14-segment LED display to any Feather microcontroller. Each character can show full alphanumeric text (A–Z, 0–9) plus symbols, making it ideal for clocks, sensor readouts, status messages, an...

SKU: AF-3130

The Adafruit 0.54" Quad Alphanumeric FeatherWing Display in red adds a bright, 4-character 14-segment LED display to any Feather board. Each character can display letters, numbers, and symbols, making it ideal for clocks, status indicators, sensor readouts, and more. Driven by the HT16K33 I2C ma...

SKU: AF-3131

The Adafruit 0.54" Quad Alphanumeric FeatherWing Display in yellow adds a bright, easy-to-read 4-character 14-segment LED display to any Feather microcontroller. Each character can show full alphanumeric text (A–Z, 0–9) plus symbols, making it ideal for clocks, sensor readouts, status messages, a...

SKU: DF-DFR0555

The Gravity I2C LCD1602 is a 16×2 character LCD display module with a blue backlight and white text. It communicates over I2C, requiring only two data pins instead of the many parallel connections of a traditional LCD1602. The module is compatible with both 3.3V and 5V systems, and the contrast i...