All Products

SKU: DF-FIT0916-F · MPN: FIT0916-F

These labelled jumper cables are designed to make Gravity project wiring easier to follow, especially when a build has several similar connections. Each cable carries I2C/UART pin labels so you can identify power, ground, clock/receive and data/transmit lines without relying only on wire colour o...

SKU: AF-3671

The Adafruit CSI/DSI Cable Extender Thingy lets you connect two 15-pin 1.0mm pitch flex cables end-to-end, extending the cable length for your Raspberry Pi Camera (CSI) or Display (DSI) connection. It handles all the pin rearranging automatically — just snap in two cables and go. Key Features ...

SKU: DF-FIT0250

A 1.25 m braided mesh cable guide that bundles and protects your wiring. The flexible braid provides structure and rigidity to loose cables, and can be compressed to expand the opening — making it easy to feed multiple cables through a single sleeve. Key Features Expandable Mesh Braid – Compre...

SKU: AF-5386

A 26-pin flexible flat cable (FPC) with 1mm pitch, 20cm in length. FPC cables are ultra-thin and flexible, making them ideal for tight spaces where round cables would be too bulky. This cable is commonly used for connecting laptop floppy drives and other 26-pin peripherals. Key Features 26 Pin...

SKU: SF-COM-11913

A green inverter connector cable for use with the INV133 electroluminescent inverter, bridging the gap between your inverter and ELastoLite panels. The 4.5-inch cable has bare wire leads that can be ironed directly onto ELastoLite connect patches for a clean, secure connection. ELastoLite is a w...

SKU: LB-3-JST

A pack of ten 30 cm adapter cables, each with a 3-pin JST connector on one end and a standard female servo connector on the other. Ideal for connecting servos to receivers, controllers, or any device that uses a JST-style port instead of a standard servo header. Key Features JST to Female Serv...

SKU: AF-4524

This 24-pin FFC/FPC extender lets you connect two 24-pin 0.5mm pitch flexible flat cables end-to-end, extending the total cable length. A simple solution when your existing cable isn't long enough to reach. Key Features 24-Pin, 0.5mm Pitch – Matches standard 24-pin FFC/FPC cables End-to-End E...

SKU: SF-PRT-26025

This is a 300mm camera cable for use with MIPI displays and the Raspberry Pi 5. The Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can support either a camera or a display. These connectors use the same 22-way, 0.5mm-pitch “mini” FPC format as the Compute Module Development ...

SKU: AF-4523

A simple 40-pin FFC/FPC extender that connects two 0.5mm pitch flexible flat cables end-to-end, extending the total cable length. Ideal for reaching between components that are further apart than a single cable allows. The extender uses two ZIF (zero insertion force) connectors. Carefully pry th...

SKU: SF-CAB-14303

A 10-pack of cables with an alligator clip on one end and a bare hookup pigtail (male pin) on the other. These cables make it easy to connect alligator clips directly into breadboards, development boards, and any standard 0.1" pin header. Key Features Alligator Clip to Male Pigtail – Clip one ...

SKU: AF-1800

A solder-on 3.5 mm (1/8") stereo audio plug for building custom audio cables. Made from durable metal with a flexible spring strain relief, it provides a solid, professional-quality connection. Solder your wires to the three contact points and you have a custom cable ready to go. Key Features ...

SKU: SF-CAB-13191

A 4-pack of cables with an alligator clip on one end and a bare hookup pigtail (male pin) on the other. These cables make it easy to connect alligator clips directly into breadboards, development boards, and any standard 0.1" pin header. Key Features Alligator Clip to Male Pigtail – Clip one e...

SKU: AF-2144

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 2 meters long. We hav...

SKU: AF-3559

A straight Micro HDMI socket adapter for building custom HDMI cables using DIY HDMI ribbon cable and flex cable clips. Simply attach this adapter to one end of a compatible HDMI ribbon cable and choose any other HDMI adapter for the opposite end. Tested with Raspberry Pi at 1080p. Note that DIY ...

SKU: AF-1646

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display for a different size. Works great, just carefully open the connector on the Pi and slip this one in.This cable is 100mm long We have cables in 50mm...

SKU: AF-2143

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 1 meter long. We have cables ...

SKU: LB-LR0293-29

These compact jumper cables feature a premium female header on one end and a grippy mini alligator clip on the other — perfect for breadboarding with non-header-friendly boards and components. Clip onto a micro:bit, Circuit Playground, conductive materials, or even a banana, then plug straight in...

SKU: SF-CAB-09556

This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable’s connector is composed of two rows of five 0.1" spaced pins; it’s also polarized, as is the mating connector on-board the Bus Pirate, so you can only connect the cable in one direction. The lea...

SKU: AF-993

This handy USB extension cable will make it easy for you to extend your USB cable when it won't reach. The connectors are gold plated for years of reliability. We use these handy cables all over our factory and homes. Cable is standard "Adafruit black".Cable length: 10 feet (3 meters)

SKU: AF-3548

A straight HDMI plug adapter for building custom HDMI cables. Pair it with an HDMI ribbon cable and snap on any combination of DIY HDMI adapters using the flex cable clips — mix and match plugs, sockets, and angles to suit your project. Tested with Raspberry Pi at 1080p. Ideal for tight enclosur...