All Products

SKU: AF-2883

The Adafruit Pi Protector for Raspberry Pi Zero is a minimal, crystal-clear acrylic protector that keeps your pocket-sized Pi Zero safe without adding bulk. Just two acrylic pieces secured with four screws — sleek, lightweight, and perfect for carrying in your pocket. All edge connectors remain ...

SKU: LB-LS0431

A lightweight ABS plastic case to protect your Raspberry Pi Zero or Zero W from damage. Simple snap-together design with mounting screws included. Key Features ABS Plastic – Durable and lightweight protection Compatible – Fits Raspberry Pi Zero and Zero W Port Access – Cut-outs for cables an...

SKU: AF-3446

The first 'official' Pi Zero case from the Raspberry Pi Foundation is here in Raspberry Pi's sleek pink and white! While we've had our own classic Pi Zero case for a little while now, the Pi Foundation celebrates the release of the Pi Zero W with this impressive, well-designed effort that is d...

SKU: AF-5213

Soft silicone dust covers designed to fit Mini HDMI ports. They slip into the socket to keep dust and debris out when the port is not in use, helping to maintain reliable connections over time. Key Features Mini HDMI Fit – Sized specifically for Mini HDMI sockets Soft Silicone – Easy to inser...

SKU: AF-3252

The Adafruit Raspberry Pi Zero Case is a compact two-piece polycarbonate enclosure that protects your Pi Zero while keeping all ports accessible. Designed by Mike Doell, it features a sleek black base and clear top that snap together without screws. The case provides slim openings for mini HDMI,...

SKU: AF-801

The Adafruit Prototyping Pi Plate Kit snaps onto your Raspberry Pi and provides a generous prototyping area with all GPIO, I2C, SPI, and power pins broken out to labelled 0.1" strips and 3.5 mm screw-terminal blocks. It's designed for the original Pi Model A/B but also works with any 40-pin Pi (A...

SKU: AF-2258

The Adafruit Raspberry Pi B+ / Pi 2 / Pi 3 Case is a durable polycarbonate enclosure with a smoke-tinted base and clear top. Designed by Mike Doell, it offers a clean, professional look while keeping your Pi protected and fully accessible. The case features slim openings for all cables, a bevell...

SKU: PI-RPI-020

The Official Raspberry Pi Zero Case is designed to fit both the Pi Zero and Pi Zero W. It ships with three interchangeable lids so you can configure it for different use cases: a plain lid for a clean finish, a GPIO lid for header access from above, and a camera lid with a short ribbon cable for ...

SKU: AF-3253

The Adafruit Raspberry Pi Camera Board Case is a compact two-piece polycarbonate enclosure that protects your Pi Camera while providing a 1/4" tripod mount on the back. Designed by Mike Doell, it snaps together without screws and features a sleek black base with a clear top. The case includes a ...

SKU: AF-1754

The Adafruit Pi T-Cobbler breaks out all the power, GPIO, I2C and SPI pins from the Raspberry Pi's 26-pin header onto a solderless breadboard in a T-shaped layout. The wider T-shape makes the pin labels easier to read compared to the compact Cobbler. Comes fully assembled with a 26-pin ribbon cab...

SKU: AF-3203

The Adafruit Perma-Proto Bonnet Mini Kit is a prototyping daughter board sized for the Raspberry Pi Zero. It plugs directly onto the Pi's 2×20 GPIO header and provides a grid of 0.1″ soldering holes connected in a familiar breadboard pattern — making it easy to transfer circuits from a solderless...

SKU: AF-5785

The Adafruit CSI/DSI Cable Adapter Thingy converts between the 15-pin 1.0mm pitch camera/display connector found on full-size Raspberry Pi boards and the 22-pin 0.5mm pitch connector used on the Pi Zero and CM4 development boards. It handles all the pin rearranging automatically — just snap in tw...

SKU: AF-3416

The Adafruit 16-Channel PWM/Servo Bonnet adds precision servo and PWM control to your Raspberry Pi. Using the PCA9685 I2C PWM controller, it drives up to 16 servos or PWM outputs simultaneously with 12-bit resolution — completely free-running with no Pi processing overhead. Up to 62 bonnets can ...

SKU: AF-3589

The Adafruit PiUART is a compact add-on that provides USB serial console access and switchable power for your Raspberry Pi. It plugs directly onto the GPIO header and connects to your computer via a Micro-USB cable, giving you instant terminal access to the Pi's console — perfect for headless set...

SKU: AF-2359

The Adafruit Raspberry Pi A+ Case is a slim, durable polycarbonate enclosure designed specifically for the Raspberry Pi Model A+. With a smoke-tinted base and clear top, it offers a clean, professional look while keeping your Pi protected and accessible. Designed by Mike Doell, the case features...

SKU: AF-3386

The Adafruit PiRTC is a battery-backed real-time clock that plugs directly onto your Raspberry Pi's GPIO header, letting your Pi keep accurate time even when powered off. Built around the PCF8523 RTC with native Linux kernel support, it's ideal for data logging, time-stamping, alarms, and any pro...

SKU: AF-4506

The Adafruit 1.3" Colour TFT Bonnet for Raspberry Pi combines a 240×240 IPS TFT display with a 5-way joystick and two pushbuttons on a single plug-and-play bonnet. The display is driven by the ST7789 controller over SPI, delivering vibrant 16-bit colour with wide viewing angles. A Qwiic/STEMMA Q...

SKU: AF-3422

The Adafruit Arcade Bonnet makes it easy to build retro gaming projects with a Raspberry Pi. It's sized to match the Pi Zero for compact builds, but works with any Pi that has a 2×20 header (Pi Zero, Pi 2, Pi 3, Pi B+, etc.). The bonnet manages all buttons and switches through an I2C GPIO expand...

SKU: AF-6057 · MPN: ADA6057

SKU: AF-6358 · MPN: ADA6358

Build large, colourful HUB75 RGB LED matrix displays from a Raspberry Pi without the usual jumper-wire tangle. This Adafruit Bonnet plugs onto the 40-pin GPIO header and drives three parallel matrix strings using the active3 pinout, so it can handle roughly three times as many panels or pixels as...