All Products

SKU: AF-3886

The Adafruit MPU-6050 breakout combines a 3-axis accelerometer and 3-axis gyroscope in a single compact sensor, providing 6 degrees of freedom (6-DoF) motion sensing over I2C. A proven and popular IMU, the MPU-6050 is ideal for detecting orientation, movement, and rotation in robotics, wearables,...

SKU: AF-4716

The Adafruit MS8607 is a factory-calibrated 3-in-1 sensor that measures barometric pressure, relative humidity, and temperature over I2C. Made by TE Connectivity, this PHT (Pressure, Humidity, Temperature) sensor is a compact, all-in-one solution for weather stations, environmental monitoring, an...

SKU: AF-5309

The Adafruit MSA311 is a compact, low-cost triple-axis accelerometer with 14-bit resolution and a rich set of built-in motion detection features. Very similar to the MSA301 but with an updated I2C address (0x62 instead of 0x26), it includes tap/double-tap detection, orientation sensing, freefall ...

SKU: AF-1436

The Adafruit Multi-pitch FPC Adapter breaks out 40 pins of flexible printed circuit (FPC) cable to standard 0.1" spaced headers for easy breadboard prototyping. With pads for 0.5 mm, 0.6 mm, 0.7 mm, 0.8 mm, and 1.0 mm pitch cables, it covers the most common FPC connector spacings in a single vers...

SKU: AF-3357

The Adafruit Music Maker FeatherWing turns any Feather board into a versatile audio player and MIDI synthesiser. Powered by the VS1053B codec chip, it decodes MP3, AAC, Ogg Vorbis, WMA, FLAC, WAV, and MIDI formats, with digital bass, treble, and volume controls — all over a lightweight SPI interf...

SKU: AF-1790

The Adafruit Music Maker MP3 Shield turns any Arduino into a versatile audio player, recorder, and MIDI synthesiser. Powered by the VS1053B codec chip, it decodes MP3, AAC, Ogg Vorbis, WMA, FLAC, WAV, and MIDI formats, and can also record audio in PCM (WAV) or compressed Ogg Vorbis — all over a l...

SKU: AF-4538

The Adafruit NAU7802 is a high-resolution 24-bit differential ADC breakout designed specifically for reading strain gauges, load cells, and other Wheatstone bridge sensors. With built-in gain amplification and calibration circuitry, it converts the tiny voltage changes from bridge sensors into pr...

SKU: AF-5766

The Adafruit NeoDriver converts I2C commands into NeoPixel (WS2812/SK6812) timing signals, letting you control addressable LED strips from any board with an I2C bus — even platforms that lack native NeoPixel support. Simply send pixel data over I2C and the on-board ATtiny1616 handles the precisio...

SKU: AF-5695

The Adafruit NeoKey BFF adds a single mechanical key switch with RGB backlighting to any QT Py or Xiao board. Designed to solder or plug onto the back of your QT Py, it features a Kailh hot-swap socket for tool-free MX-compatible switch changes and a reverse-mount NeoPixel that shines up through ...

SKU: AF-5020

The Adafruit NeoKey Trinkey is a USB-A development board that combines an ATSAMD21 microcontroller, a Cherry MX-compatible key switch footprint, and an RGB NeoPixel LED into one tiny plug-in package. Insert it into any USB-A port and you've got a single-key macro pad, password entry device, or cu...

SKU: AF-4865

The Adafruit NeoPixel 332 LED/m Silicone Bead Strip packs an astonishing 165 miniature SK6812 NeoPixels into a 0.5 m length, coated with a milky silicone bead diffuser for a smooth, continuous colour gradient. At 332 LEDs per metre, this is one of the highest-density addressable LED strips availa...

SKU: AF-5975 · MPN: ADA5975

A compact single-NeoPixel breakout board with mounting holes and pluggable JST SH connectors, perfect for adding individually addressable RGB lighting to small projects. The PCB measures less than 13 × 13 mm and works with both 3.3V and 5V power. Two 3-pin JST SH (1 mm pitch) connectors allow ea...

SKU: AF-1507

An ultra-high-density NeoPixel strip packed with 144 individually addressable RGB LEDs per metre on a flexible white PCB with white mask. Each pixel offers full 24-bit colour control, and only a single data pin is needed to drive the entire strip. Also available with a black PCB. The strip comes...

SKU: AF-1460-2552

A versatile NeoPixel strip with 30 individually addressable RGB LEDs per metre on a flexible black PCB. Each pixel offers full 24-bit colour control with only a single data pin required. The lower pixel density makes this strip ideal for longer runs where tight spacing isn't needed. The strip is...

SKU: AF-1460

A versatile NeoPixel strip with 30 individually addressable RGB LEDs per metre on a flexible black PCB, supplied in a 5-metre length (150 LEDs total). Each pixel offers full 24-bit colour control with only a single data pin required. Also available in 1-metre and 2-metre lengths. The strip is 12...

SKU: AF-2538

A versatile NeoPixel strip with 30 individually addressable RGB LEDs per metre on a flexible white PCB. Each pixel offers full 24-bit colour control with only a single data pin required. The white PCB blends naturally into light-coloured surfaces. Also available with a black PCB. The strip is 12...

SKU: AF-2848

An ultra-high-density RGBW NeoPixel strip with 144 individually addressable LEDs per metre on a flexible black PCB. Each pixel contains four LED elements — red, green, blue, and a dedicated white — providing 32-bit colour control and superior white output compared to RGB-only strips. The dedicat...

SKU: AF-2824

An RGBW NeoPixel strip with 30 individually addressable LEDs per metre on a flexible black PCB. Each pixel contains four LED elements — red, green, blue, and a dedicated white — providing 32-bit colour control and superior white output compared to RGB-only strips. Also available at 144 LED/m dens...

SKU: AF-2837

A mid-density RGBW NeoPixel strip with 60 individually addressable LEDs per metre on a flexible black PCB. Each pixel contains four LED elements — red, green, blue, and a dedicated white — providing 32-bit colour control and superior white output compared to RGB-only strips. Also available at 30 ...

SKU: AF-2832

An RGBW NeoPixel strip with 30 individually addressable LEDs per metre on a flexible white PCB. Each pixel contains four LED elements — red, green, blue, and a dedicated white — providing 32-bit colour control and superior white output compared to RGB-only strips. Also available with a black PCB ...