All Products

SKU: SF-PRT-09011

USB Type ‘A’ Female SMD connector. For use with any PCB that will be used with a Type A to Type A USB cable. Designed to mount to the UBW32. Documents: Datasheet

SKU: SF-PRT-00139

A USB Type-B female connector with 0.1" pin spacing, suitable for use on development boards and perfboard. The four connection pins fit standard 2.54 mm pitch headers. The two support posts can be accommodated by drilling 80 mil holes, or trimmed off entirely for a flush fit. Specifications Co...

SKU: SF-COM-15111

USB-C is quickly becoming more and more prominent in the maker community because, let’s be honest, who likes trying three times to insert USB into a port? This is a 16-pin, female, USB Type C connector that is commonly found in smart phones, laptops, and other newer electronics. Each USB-C connec...

SKU: DF-TEL0137

This GPS receiver brings much more accurate and faster positioning performance with stronger signal compared with traditional GPS receivers. It is compact, lightweight and portable. Integrated with built-in receiving antenna, this product adopts a high-precision positioning chip and industrial-...

SKU: DF-TEL0138

This is an Ublox chip-based GPS receiver module of low power and high sensitivity that can receive 56 channels satellite signal. Compared with traditional GPS receivers, it brings much more accurate and faster-positioning performance with stronger signals. Integrated with a built-in receiving ant...

SKU: AF-5858 · MPN: ADA5858

Add USB host capability to a Feather-based project, so your microcontroller can talk to devices like keyboards, mice and USB mass storage drives. This board is built around the MAX3421E, a well-proven USB host controller that communicates with the main Feather over SPI plus an IRQ pin.It is a han...

SKU: AF-4844

This ordinary-looking USB cable actually has a surprise trick up its rubber sleeve. It's kinda like a 'miniature KVM' (minus the video part, and only one USB port). The mechanical switch connects to the D+ and D- pins on the two USB A host ports. So when you switch back and forth, the USB pe...

SKU: EC-CEF02096C

If you want to connect Raspberry Pi which has only one single micro port to various USB, the USB Hub for Raspberry Pi Zero is your right choice. Especially there is no soldering and wires reqiured. The USB Hub for RPI Zero has 4 USB extension interface and external battery, and the USB 2.0 has a ...

SKU: LB-LAMP-A

A pre-assembled USB-powered LED lamp kit — ready to use straight out of the box. This version comes fully soldered and tested, making it ideal for classroom activities where students design and build a lampshade without needing soldering skills. Key Features Fully Assembled – Soldered and test...

SKU: PK-PT-1362U

This compact cordless screwdriver features a 3.6V lithium-ion battery with USB charging, making it easy to recharge from any USB port — at home, in the car, or on the go. The full metal gearbox delivers 3 Nm of torque at 350 RPM for reliable driving power in a pocket-friendly form factor. The an...

SKU: AF-259

This is a Lithium Ion and Lithium Polymer battery charger based on the MCP73833. It uses a USB mini-B for connection to any computer or 'USB wall adapter'. Charging is performed in three stages: first a preconditioning charge, then a constant-current fast charge and finally a constant-volta...

SKU: AF-4288

Here's a hand-held-size rechargeable battery pack for your Raspberry Pi (or Metro, or anything else that uses 5V!). This pack is intended for providing a lot of power to a smartphone, tablet, etc, but we found it does a really good job of powering other miniature computers and micro-controller...

SKU: SF-TOL-18627

An 8-channel USB logic analyser with sampling rates up to 24 MHz, ideal for debugging UART, I2C, SPI, and other digital communication protocols. Compatible with both 3.3 V and 5 V logic levels and powered directly via the USB Type-C connection. Works with PulseView and the open-source sigrok sof...

SKU: LB-LS2925

USB male to 2 Female cable 30cm Type#1

SKU: LB-LS4167

This USB Male to USB Female + MicroUSB + USB-C Adapter is perfect for connecting your USB devices to your computer. It features a male USB connector on one end and a female USB connector on the other, as well as a MicroUSB connector and a USB-C connector. This adapter is compatible with most U...

SKU: AF-1833

This breakout board gives you easy access to all 5 pins of a USB Micro-B connector via standard 0.1" header pins. It's a simple way to add USB 5V power to a project, interface with a USB-capable microcontroller, or prototype custom USB connections on a breadboard. The board uses a micro-AB conne...

SKU: SF-CAB-13244

A short 150 mm (6″) USB 2.0 Type-A to Micro-B cable, ideal for connecting development boards, chargers, and other devices within compact enclosures where a full-length cable isn't needed. Specifications Connector A – USB Type-A (male) Connector B – Micro-B 5-pin (male) Standard – USB 2.0 Le...

SKU: SF-CAB-10215

A standard USB 2.0 Type-A to Micro-B cable, 1.8 m (6 ft) in length. Micro USB is the standard connector found on a wide range of development boards, microcontrollers, and electronics accessories. Key Features USB 2.0 Type-A to Micro-B – Standard 5-pin micro USB connector 1.8 m Length – Genero...

SKU: AF-4009

This USB A to Micro-B cable looks like any other at first glance — but plug it in and dozens of tiny LEDs embedded along the cable light up in blue and green. It's functional and fully supports both data transfer and charging, while adding a satisfying glow to your setup. The LEDs are bright eno...

SKU: AF-4008

At first glance this appears to be an ordinary A to micro B USB cable. Plug it in to your device and power supply, and you get a colorful glitter of dozens of little LEDs embedded in the length of the cable.Can be used for data and charging.The LEDs are luminous but not too bright. Perfect for va...