All Products
Showing 41-54 of 54 products · 6 unavailable products hidden
Teensy 4.0
The Teensy 4.0 is a high-performance microcontroller development board powered by the NXP iMXRT1062 ARM Cortex-M7 processor running at 600 MHz. Despite its compact 35.6 × 17.8 mm (1.4 × 0.7") form factor — the same size as the Teensy 3.2 — it delivers exceptional processing power with a dual-issu...
Teensyduino Tutorial Kit
·
Get started with Teensy development using a kit built around the official PJRC Teensyduino Tutorials, parts 1 through 4. It gathers the fundamental electronic components needed for the early lessons, so you can focus on building and learning.The kit is intended as a companion for your Teensy boar...
Teensy 4.0
Teensy 4.0: High Performance in a Compact Form The Teensy 4.0 is a powerful, compact development board measuring just 1.4" × 0.7". It features the blazing-fast 600 MHz ARM Cortex-M7 processor, built on the NXP iMXRT1062 chip — currently the fastest microcontroller available. Maintaining the same ...
A-Star 32U4 Micro
The Pololu A-Star 32U4 Micro is a general-purpose programmable module based on the ATmega32U4 AVR microcontroller from Microchip. It packs 32 KB of flash, 2.5 KB of RAM, and built-in USB into a tiny 1″ × 0.6″ DIP package — even smaller than competing ATmega32U4 boards like the Teensy 2.0 and Pro ...
Adafruit CAN Pal - CAN Bus Transciever
The Adafruit CAN Pal is a CAN bus transceiver breakout for microcontrollers that have a native CAN peripheral. It converts 3.3V logic-level CAN TX/RX signals to the differential signalling required for the CAN bus. This is a transceiver only — it does not include a CAN controller, so your microco...
SmartMatrix SD Shield v3 - for Teensy 3.2
The SmartLED Shield (V4) provides a simple, solder-free way to connect a Teensy 3.2, Teensy 3.5, or Teensy 3.6 to HUB75 RGB LED Matrix Panels. Just plug in your Teensy, connect your panel, and start displaying graphics, patterns, or animated GIFs using the SmartMatrix Library. The shield include...
VL53L1X Time of Flight (ToF) Sensor Breakout
The VL53L1X Time of Flight sensor breakout uses a low-power laser to measure distances with excellent accuracy and speed. With a detection range of 4 cm to 4 metres and up to 50 Hz sampling frequency, it's ideal for proximity sensing, presence detection, and collision avoidance on robots. This b...
5V 1A (1000mA) USB port power supply - UL Listed
This 5V 1A USB power supply provides clean, regulated power for microcontrollers, development boards, and USB-charged devices. It accepts 110–240V AC input and outputs via a USB Type-A port, so you simply plug in whatever USB cable your project needs. The supply is intentionally designed to outp...
Gravity: I2C 4-20mA DAC Module (Arduino Compatible)
The Gravity I2C 4-20mA DAC Module outputs 0–25 mA of current controlled via I2C, with high-accuracy 4–20 mA output available after calibration (0.2% linearity error). Built around the GP8302 chip, it provides 12-bit resolution and is compatible with Arduino, enabling precise current-loop control ...
DE2290D 2D Barcode Scanner Breakout v2
·
Built around DYscan's DE2290D module, this SparkFun breakout brings 1D and 2D barcode scanning to USB and embedded projects. It uses CMOS image recognition with a 300,000-pixel global shutter camera, giving it the ability to read printed labels, merchandise packaging and codes displayed on screen...
HCR - Mobile Robot Platform (Support Kinect)
The HCR (Home Care Robot) Mobile Robot Platform is a two-wheel-drive robot chassis with a three-level structure, designed for building indoor service and research robots. The kit includes two DC motors with integrated encoders, two rubber wheels, an omni-directional caster wheel, three collision ...
Teensy Audio Adaptor Board
NOT COMPATIBLE WITH THE TEENSY 4. For compatible version, see Teensy Audio Adaptor Board (Revision D)This is the Teensy Audio Adapter Board that can be added to a Teensy 3.0, 3.1, 3.2, 3.5 or 3.6 for your next audio project. The shield provides you with an easy-to-use tool to add high qualit...
Servo - Generic High Torque (Standard Size)
A reliable, high-torque standard-size servo (FS5106B) with dual ball bearings and nylon gears. Delivering up to 83.47 oz-in of torque at 6V with a speed of 0.16 sec/60°, it's a versatile choice for robotics, RC, and mechatronics projects. Features a standard 3-pin power and control cable with 18...
Teensy Audio Tutorial Extra Parts Kit
·
This kit gathers the small supporting parts needed to complete projects from the official Teensy Audio Tutorial. It is intended for makers who already have a Teensy board and the main audio adapter, but still need the specific buttons, potentiometers and connectors used in the tutorial builds.Ins...
