All Products

SKU: AF-861

You will squeak with delight when you hold this adorable miniature LED matrix. 0.8" square, its got everything a big LED matrix has, but bite sized! 64 bright yellow-green LEDs are contained inside the plastic body, in an 8x8 matrix. There are 16 pins on the side, 8 on each, with 0.1" spacing ...

SKU: SF-PRT-14424

Sometimes referred to as “spade connectors,” these quick disconnects are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. The shape of these connectors allows them to be used with a variety of retro game-cabinet buttons, as well as li...

SKU: AF-5709

The Adafruit CAN Bus FeatherWing adds CAN bus networking to any Feather board. It uses the MCP2515 CAN controller and TJA1051/3 transceiver to send and receive messages in standard or extended format at up to 1 Mbps over a two-wire differential bus. Only an SPI port and two pins (chip-select and ...

SKU: SF-PRT-14407

Sometimes referred to as “spade connectors,” these quick disconnects are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. The shape of these connectors allows them to be used with a variety of retro game-cabinet buttons, as well as li...

SKU: PL-2739

The Pololu AltIMU-10 v5 is a compact inertial measurement unit (IMU) and altimeter that combines a gyroscope, accelerometer, magnetometer, and barometric pressure sensor on a single board. It provides ten independent measurements — pressure, 3-axis rotation, 3-axis acceleration, and 3-axis magnet...

SKU: DF-FIT0839 · MPN: FIT0839

This ultra-slim green LED strip is made for decorative lighting in compact electronics projects, models and robotics where ordinary LED tape is too wide. At only 2.5mm wide and 1mm thick, it can fit into narrow channels, small frames and other tight installations.The strip has 60 SMD 0805 LEDs di...

SKU: AF-1374

This breakout board is the simplest way to create a project with a single "momentary" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sensor.When a capacitive load is detected (e.g. a person touches the sensor-pad area...

SKU: AF-5997 · MPN: ADA5997

The Adafruit CH334F Mini 4-Port USB Hub Breakout converts one USB host port into four downstream ports using the CH334F USB 2.1 hub chip. Designed to be compact and embeddable, it fits inside enclosures or existing devices where a standard USB hub would be too bulky. The upstream connection can ...

SKU: SF-COM-09420

Resonators function like crystals, but are a lower cost solution that does not require external caps.These resonators are +/-0.5% or better from -20C-+80C. These resonators have built-in load capacitors so no external caps are needed.