All Products
Showing 41-51 of 51 products · 9 unavailable products hidden
900MHz Duck Antenna RP-SMA
Adafruit Radio FeatherWing - RFM69HCW 433MHz
SparkFun XBee 3 Wireless Kit
Bluno Mega 2560 - An Arduino Mega 2560 with Bluetooth 4.0
Crystal 10MHz
LoRa MESH Radio Module - 433MHz
RFduino - RGB/Button Shield
433MHz RF Transceiver CC1101 Module
Adafruit CAN Pal - CAN Bus Transciever
434Mhz Serial RF Module HC-11 (1-40M)
Adafruit RP2040 CAN Bus Feather with MCP2515 CAN Controller
900MHz Duck Antenna RP-SMA
A 900/1800MHz dual-band duck antenna with 2dBi gain and an RP-SMA connector. Well suited for XBee 900MHz modules and other 900MHz radio applications. 50-ohm impedance, 105mm long. Specifications Frequency – 900/1800MHz dual-band Gain – 2dBi Connector – RP-SMA Impedance – 50 ohm Length – 10...
Adafruit Radio FeatherWing - RFM69HCW 433MHz
The Adafruit Radio FeatherWing RFM69HCW @ 433 MHz adds short-to-medium range packet radio to any Feather board. Based on the SX1231 transceiver, this FeatherWing provides FSK packet radio with built-in AES-128 encryption, auto-retransmit, and multipoint networking — ideal for sensor networks, rem...
SparkFun XBee 3 Wireless Kit
This is the SparkFun XBee 3 Wireless Kit, the perfect box full of goodies to get you started using XBees. Inside this kit you will find two XBee 3 Modules, one XBee Explorer, one Xbee Shield and a set of Arduino R3 headers to solder onto the shield. Our entire goal for the XBee Kit was to make wi...
Bluno Mega 2560 - An Arduino Mega 2560 with Bluetooth 4.0
The Bluno Mega 2560 combines the ATmega2560 microcontroller with an integrated TI CC2540 Bluetooth 4.0 (BLE) module, bringing wireless communication to the Arduino Mega form factor. It supports wireless programming over BLE, Bluetooth HID, iBeacon, and serial pass-through — while remaining fully ...
Crystal 10MHz
Standard frequency crystals - use these crystals to provide a clock input to your microprocessor. Rated at 20pF capacitance and +/- 50ppm stability. Low profile HC49/US Package.
LoRa MESH Radio Module - 433MHz
LoRa MESH Radio Module is a high performance, low power, long-range micro-power RF module, using a distributed ad-hoc network communication mode, embedded wireless MESH MANET protocols, users do not need to do anything modified to present devices, protocols, nor need for secondary development...
RFduino - RGB/Button Shield
This is the RGB/Button Shield for RFduino, a small add-on board for the RFduino DIP module. Just as its name suggests, this little board is equipped with two pushbuttons and an RGB LED. This shield can be easily attached above or below any other RFduino product and will work perfectly with the...
433MHz RF Transceiver CC1101 Module
A low-cost sub-1 GHz RF transceiver module based on the Texas Instruments CC1101 IC, designed for low-power wireless communication. Pre-configured for 433 MHz operation, it is well suited for ISM and Short Range Device (SRD) applications with a transmission range of 300–500 metres depending on en...
Adafruit CAN Pal - CAN Bus Transciever
The Adafruit CAN Pal is a CAN bus transceiver breakout for microcontrollers that have a native CAN peripheral. It converts 3.3V logic-level CAN TX/RX signals to the differential signalling required for the CAN bus. This is a transceiver only — it does not include a CAN controller, so your microco...
434Mhz Serial RF Module HC-11 (1-40M)
The HC-11 is a low-cost, high-performance FSK transceiver module operating at 434 MHz, designed for transparent wireless serial communication. With a UART/TTL interface, it handles all RF protocol processing internally — simply send serial data in and it appears wirelessly at the receiving module...
Adafruit RP2040 CAN Bus Feather with MCP2515 CAN Controller
The Adafruit RP2040 CAN Bus Feather combines the powerful RP2040 microcontroller with an MCP25625 CAN controller and transceiver, giving you a ready-to-go CAN Bus interface in the compact Feather form factor. No soldering is needed to get started — just connect your CAN Bus lines to the included ...
